11,981 research outputs found
Solar powered actuator with continuously variable auxiliary power control
A solar powered system is disclosed in which a load such as a compressor is driven by a main induction motor powered by a solar array. An auxiliary motor shares the load with the solar powered motor in proportion to the amount of sunlight available, is provided with a power factor controller for controlling voltage applied to the auxiliary motor in accordance with the loading on that motor. In one embodiment, when sufficient power is available from the solar cell, the auxiliary motor is driven as a generator by excess power from the main motor so as to return electrical energy to the power company utility lines
Droplet monitoring probe
A droplet monitoring system is disclosed for analysis of mixed-phase fluid flow in development of gas turbines. The system uses a probe comprising two electrical wires spaced a known distance apart and connected at one end to means for establishing a dc potential between the wires. A drop in the fluid stream momentarily contacting both wires simultaneously causes and electrical signal which is amplified, detected and counted
Hydraulophone design considerations : absement, displacement, and velocity-sensitive music keyboard in which each key is a water jet
We present a musical keyboard that is not only velocity-sensitive, but in fact responds to absement (presement), displacement (placement), velocity, acceleration, jerk, jounce, etc. (i.e. to all the derivatives, as well as the integral, of displacement). Moreover, unlike a piano keyboard in which the keys reach a point of maximal displacement, our keys are essentially infinite in length, and thus never reach an end to their key travel. Our infinite length keys are achieved by using water jet streams that continue to flow past the fingers of a person playing the instrument. The instrument takes the form of a pipe with a row of holes, in which water flows out of each hole, while a user is invited to play the instrument by interfering with the flow of water coming out of the holes. The instrument resembles a large flute, but, unlike a flute, there is no complicated fingering pattern. Instead, each hole (each water jet) corresponds to one note (as with a piano or pipe organ). Therefore, unlike a flute, chords can be played by blocking more than one water jet hole at the same time. Because each note corresponds to only one hole, different fingers of the musician can be inserted into, onto, around, or near several of the instrument’s many water jet holes, in a variety of different ways, resulting in an ability to independently control the way in which each note in a chord sounds. Thus the hydraulophone combines the intricate embouchure control of woodwind instruments with the polyphony of keyboard instruments. Various forms of our instrument include totally acoustic, totally electronic, as well as hybrid instruments that are acoustic but also include an interface to a multimedia computer to produce a mixture of sounds that are produced by the acoustic properties of water screeching through orific plates, as well as synthesized sounds
An update of commercial infrared sensing and imaging instruments
A classification of infrared sensing instruments by type and application, listing commercially available instruments, from single point thermal probes to on-line control sensors, to high speed, high resolution imaging systems is given. A review of performance specifications follows, along with a discussion of typical thermographic display approaches utilized by various imager manufacturers. An update report on new instruments, new display techniques and newly introduced features of existing instruments is given
The Mercury-Redstone project
Mercury-Redstone project development history, and contributions to future manned spacecraft design and operatio
Beyond swarm intelligence: The Ultraswarm
This paper explores the idea that it may be possible to
combine two ideas – UAV flocking, and wireless cluster
computing – in a single system, the UltraSwarm. The
possible advantages of such a system are considered, and
solutions to some of the technical problems are identified.
Initial work on constructing such a system based around
miniature electric helicopters is described
Assessment of lightweight mobile nuclear power systems
A review was made of lightweight mobile nuclear power systems (LMNPS). Data cover technical feasibility studies of LMNPS and airborne vehicles, mission studies, and non-technical conditions that are required to develop and use LMNPS
Nuclear air cushion vehicles
The state-of-the-art of the still-conceptual nuclear air cushion vehicle, particularly the nuclear powerplant is identified. Using mission studies and cost estimates, some of the advantages of nuclear power for large air cushion vehicles are described. The technology studies on mobile nuclear powerplants and conceptual ACV systems/missions studies are summarized
Recommended from our members
UC Berkeley's Cory Hall: Evaluation of Challenges and Potential Applications of Building-to-Grid Implementation
From September 2009 through June 2010, a team of researchers developed, installed, and tested instrumentation on the energy flows in Cory Hall on the UC Berkeley campus to create a Building-to-Grid testbed. The UC Berkeley team was headed by Professor David Culler, and assisted by members from EnerNex, Lawrence Berkeley National Laboratory, California State University Sacramento, and the California Institute for Energy & Environment. While the Berkeley team mapped the load tree of the building, EnerNex researched types of meters, submeters, monitors, and sensors to be used (Task 1). Next the UC Berkeley team analyzed building needs and designed the network of metering components and data storage/visualization software (Task 2). After meeting with vendors in January, the UCB team procured and installed the components starting in late March (Task 3). Next, the UCB team tested and demonstrated the system (Task 4). Meanwhile, the CSUS team documented the methodology and steps necessary to implement a testbed (Task 5) and Harold Galicer developed a roadmap for the CSUS Smart Grid Center with results from the testbed (Task 5a) and evaluated the Cory Hall implementation process (Task 5b). The CSUS team also worked with local utilities to develop an approach to the energy information communication link between buildings and the utility (Task 6). The UC Berkeley team then prepared a roadmap to outline necessary technology development for Building-to-Grid, and presented the results of the project in early July (Task 7). Finally, CIEE evaluated the implementation, noting challenges and potential applications of Building-to-Grid (Task 8). These deliverables are available at the i4Energy site: http://i4energy.org/
- …