5,175 research outputs found
Simultaneous Multi-Information Fusion and Parameter Estimation for Robust 3-D Indoor Positioning Systems
Typical WLAN based indoor positioning systems take the received signal strength (RSS) as the major information source. Due to the complicated indoor environment, the RSS measurements are hard to model and too noisy to achieve a satisfactory 3-D accuracy in multi-floor scenarios. To enhance the performance of WLAN positioning systems, extra information sources could be integrated. In this paper, a Bayesian framework is applied to fuse multi-information sources and estimate the spatial and time varying parameters simultaneously and adaptively. An application of this framework, which fuses pressure measurements, a topological building map with RSS measurements, and simultaneously estimates the pressure sensor bias, is investigated. Our experiments indicate that the localization performance is more accurate and robust by using our approach
Evaluating indoor positioning systems in a shopping mall : the lessons learned from the IPIN 2018 competition
The Indoor Positioning and Indoor Navigation (IPIN) conference holds an annual competition in which indoor localization systems from different research groups worldwide are evaluated empirically. The objective of this competition is to establish a systematic evaluation methodology with rigorous metrics both for real-time (on-site) and post-processing (off-site) situations, in a realistic environment unfamiliar to the prototype developers. For the IPIN 2018 conference, this competition was held on September 22nd, 2018, in Atlantis, a large shopping mall in Nantes (France). Four competition tracks (two on-site and two off-site) were designed. They consisted of several 1 km routes traversing several floors of the mall. Along these paths, 180 points were topographically surveyed with a 10 cm accuracy, to serve as ground truth landmarks, combining theodolite measurements, differential global navigation satellite system (GNSS) and 3D scanner systems. 34 teams effectively competed. The accuracy score corresponds to the third quartile (75th percentile) of an error metric that combines the horizontal positioning error and the floor detection. The best results for the on-site tracks showed an accuracy score of 11.70 m (Track 1) and 5.50 m (Track 2), while the best results for the off-site tracks showed an accuracy score of 0.90 m (Track 3) and 1.30 m (Track 4). These results showed that it is possible to obtain high accuracy indoor positioning solutions in large, realistic environments using wearable light-weight sensors without deploying any beacon. This paper describes the organization work of the tracks, analyzes the methodology used to quantify the results, reviews the lessons learned from the competition and discusses its future
Target Tracking in Confined Environments with Uncertain Sensor Positions
To ensure safety in confined environments such as mines or subway tunnels, a
(wireless) sensor network can be deployed to monitor various environmental
conditions. One of its most important applications is to track personnel,
mobile equipment and vehicles. However, the state-of-the-art algorithms assume
that the positions of the sensors are perfectly known, which is not necessarily
true due to imprecise placement and/or dropping of sensors. Therefore, we
propose an automatic approach for simultaneous refinement of sensors' positions
and target tracking. We divide the considered area in a finite number of cells,
define dynamic and measurement models, and apply a discrete variant of belief
propagation which can efficiently solve this high-dimensional problem, and
handle all non-Gaussian uncertainties expected in this kind of environments.
Finally, we use ray-tracing simulation to generate an artificial mine-like
environment and generate synthetic measurement data. According to our extensive
simulation study, the proposed approach performs significantly better than
standard Bayesian target tracking and localization algorithms, and provides
robustness against outliers.Comment: IEEE Transactions on Vehicular Technology, 201
A Survey of Positioning Systems Using Visible LED Lights
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe
Graph Optimization Approach to Range-based Localization
In this paper, we propose a general graph optimization based framework for
localization, which can accommodate different types of measurements with
varying measurement time intervals. Special emphasis will be on range-based
localization. Range and trajectory smoothness constraints are constructed in a
position graph, then the robot trajectory over a sliding window is estimated by
a graph based optimization algorithm. Moreover, convergence analysis of the
algorithm is provided, and the effects of the number of iterations and window
size in the optimization on the localization accuracy are analyzed. Extensive
experiments on quadcopter under a variety of scenarios verify the effectiveness
of the proposed algorithm and demonstrate a much higher localization accuracy
than the existing range-based localization methods, especially in the altitude
direction
CHARACTERIZATION OF A MOBILE MAPPING SYSTEM FOR SEAMLESS NAVIGATION
Abstract. Mobile Mapping Systems (MMS) are multi-sensor technologies based on SLAM procedure, which provides accurate 3D measurement and mapping of the environment as also trajectory estimation for autonomous navigation. The major limits of these algorithms are the navigation and mapping inconsistence over the time and the georeferencing of the products. These issues are particularly relevant for pose estimation regardless the environment like in seamless navigation. This paper is a preliminary analysis on a proposed multi-sensor platform integrated for indoor/outdoor seamless positioning system. In particular the work is devoted to analyze the performances of the MMS in term of positioning accuracy and to evaluate its improvement with the integration of GNSS and UWB technology. The results show that, if the GNSS and UWB signal are not degraded, using the correct weight to their observations in the Stencil estimation algorithm, is possible to obtain an improvement in the accuracy of the MMS navigation solution as also in the global consistency of the final point cloud. This improvement is measured in about 7 cm for planimetric coordinate and 34 cm along the elevation with respect to the use of the Stencil system alone
Modeling and interpolation of the ambient magnetic field by Gaussian processes
Anomalies in the ambient magnetic field can be used as features in indoor
positioning and navigation. By using Maxwell's equations, we derive and present
a Bayesian non-parametric probabilistic modeling approach for interpolation and
extrapolation of the magnetic field. We model the magnetic field components
jointly by imposing a Gaussian process (GP) prior on the latent scalar
potential of the magnetic field. By rewriting the GP model in terms of a
Hilbert space representation, we circumvent the computational pitfalls
associated with GP modeling and provide a computationally efficient and
physically justified modeling tool for the ambient magnetic field. The model
allows for sequential updating of the estimate and time-dependent changes in
the magnetic field. The model is shown to work well in practice in different
applications: we demonstrate mapping of the magnetic field both with an
inexpensive Raspberry Pi powered robot and on foot using a standard smartphone.Comment: 17 pages, 12 figures, to appear in IEEE Transactions on Robotic
Characterization of a mobile mapping system for seamless navigation
4noMobile Mapping Systems (MMS) are multi-sensor technologies based on SLAM procedure, which provides accurate 3D measurement and mapping of the environment as also trajectory estimation for autonomous navigation. The major limits of these algorithms are the navigation and mapping inconsistence over the time and the georeferencing of the products. These issues are particularly relevant for pose estimation regardless the environment like in seamless navigation. This paper is a preliminary analysis on a proposed multi-sensor platform integrated for indoor/outdoor seamless positioning system. In particular the work is devoted to analyze the performances of the MMS in term of positioning accuracy and to evaluate its improvement with the integration of GNSS and UWB technology. The results show that, if the GNSS and UWB signal are not degraded, using the correct weight to their observations in the Stencil estimation algorithm, is possible to obtain an improvement in the accuracy of the MMS navigation solution as also in the global consistency of the final point cloud. This improvement is measured in about 7 cm for planimetric coordinate and 34 cm along the elevation with respect to the use of the Stencil system alone.openopenDI Pietra V.; Grasso N.; Piras M.; Dabove P.DI Pietra, V.; Grasso, N.; Piras, M.; Dabove, P
- …