Electrodeposited Ni/Ge and germanide schottky barriers for nanoelectronics applications

In recent years metal/semiconductor Schottky barriers have found numerous applications in nanoelectronics. The work presented in this thesis focuses on the improvement of a few of the relevant devices using electrodeposition of metal on Ge for Schottky barrier fabrication. This low energy metallisation technique offers numerous advantages over the physical vapour deposition techniques. Electrical characteristics of the grown diodes show a high quality rectifying behaviour with extremely low leakage currents even on highly doped Ge. A non-Arrhenius behaviour of the temperature dependence is observed for the grown Ni/Ge diodes on lowly doped Ge that is explained by a spatial variation of the barrier heights. The inhomogeneity of the barrier hights is explained in line with an intrinsic surface states model for Ge. The understanding of the intrinsic surface states will help to create ohmic contacts for doped n-MOSFETs. NiGe were formed single phase by annealing. Results reveal that by using these high-quality germanide Schottky barriers as the source/drain, the subthreshold leakage currents of a Schottky barrier MOSFET could be minimised, in particular, due to the very low drain/body junction leakage current exhibited by the electrodeposited diodes. The Ni/Ge diodes on highly doped Ge show negative differential conductance at low temperature. This effect is attributed to the intervalley electron transfer in Ge conduction band to a low mobility valley. The results show experimentally that Schottky junctions could be used for hot electron injection in transferred-electron devices. A vertical Co/Ni/Si structure has been fabricated for spin injection and detection in Si. It is shown that the system functions electrically well although no magnetoresistance indicative of spin injection was observed

IMPEDANCE SPECTROSCOPY FOR INTERFACE CHARACTERIZATION IN SEMICONDUCTOR DEVICES

Impedance spectroscopy (IS) is a powerful tool to characterize devices since it allows to easily decouple the contribution of different interfaces existing in the device by only accessing the external terminals. The collected data are interpreted by means of equivalent electrical circuit. In this thesis, an automated procedure is developed to automatically extract lumped circuit parameters from impedance measured data, adding physical constraints deriving from experimental capacitance. In this work, Graphene-Silicon solar cells are characterized using impedance spectra, allowing to assess a new front contact technology that ameliorates these cells performance compared to the conventional. Impedance spectroscopy is also employed to characterize perovskite solar cells. The equivalent circuit coming from these devices allows to gain knowledge on perovskite layer and recombination mechanisms. An important focus of this thesis concerns capacitance versus voltage curves in forward bias region. This analysis is made using both experimental data and numerical results obtained from TCAD environment. This study is made on Metal-Semiconductor structure, finding the analytical expression of the forward bias capacitance peak and considering the effects of interface defects on capacitance behavior. The observation of multiple peaks arising in the high forward bias region suggests that interface properties are not uniform in the entire structure. Capacitance is also investigated in SiC MOSFETs devices permitting the TCAD model calibration and SiC/SiO2 interface characterization

Compact Modeling of Intrinsic Capacitances in Double-Gate Tunnel-FETs

La miniaturització dels MOSFET en els circuits integrats ha elevat la tecnologia microelectrònica. Aquesta tendència també augmenta el grau de complexitat d'aquests circuits i els seus components bàsics. En els MOSFET convencionals, el corrent es basa en l'emissió termoiònica de portadors de càrrega, que per això limita el pendent subumbral en aquests transistors a 60 mV / dec. Per tant, per superar aquest límit i continuar amb la miniaturització per mantenir el ritme de la llei de Moore, es requereixen estructures alternatives. Entre aquestes, el transistor d'efecte de camp per túnel (TFET) es considera un possible successor de l'MOSFET. A causa del seu mecanisme alternatiu de transport de corrent, conegut com a túnel de banda a banda (B2B), el pendent subumbral en TFET pot fer-se inferior al límit de 60 mV / dec. Per comprendre i estimar el comportament dels TFET, no només com un element únic sinó també a nivell de circuit, es requereix un model compacte d'aquest dispositiu. En aquesta tesi es presenta un model basat en càrrega per descriure el comportament capacitiu d'un TFET de doble porta (DG TFET). No obstant això, la simplicitat i la flexibilitat de el model permeten usar-lo per a un altre tipus d'estructures TFET, com els TFET planars o de nanofils d'una sola porta (SG TFETs). El model és verificat amb les simulacions TCAD, així com amb mesures experimentals de TFET fabricats. El model de capacitància també inclou l'efecte dels elements paràsits. A més, en el context d'aquest treball també s'investiga la influència dels contactes de barrera Schottky en el comportament capacitiu dels TFET. Aquest model finalment es combina amb un model DC compacte existent per formar un model TFET compacte complet. A continuació, el model compacte s'implementa per a simulacions transitòries de circuits oscil·ladors d'anell basats en TFET.La miniaturización de los MOSFET en los circuitos integrados ha elevado la tecnología microelectrónica. Esta tendencia también aumenta el grado de complejidad de estos circuitos y sus componentes básicos. En los MOSFET convencionales, la corriente se basa en la emisión termoiónica de portadores de carga, que por ello limita la pendiente subumbral en estos transistores a 60 mV/dec. Por tanto, para superar este límite y continuar con la miniaturización para mantener el ritmo de la ley de Moore, se requieren estructuras alternativas. Entre estas, el transistor de efecto de campo por túnel (TFET) se considera un posible sucesor del MOSFET. Debido a su mecanismo alternativo de transporte de corriente, conocido como túnel de banda a banda (B2B), la pendiente subumbral en TFET puede hacerse inferior al límite de 60 mV/dec. Para comprender y estimar el comportamiento de los TFET, no sólo como un elemento único sino también a nivel de circuito, se requiere un modelo compacto de este dispositivo. En esta tesis se presenta un modelo basado en carga para describir el comportamiento capacitivo de un TFET de doble puerta (DG TFET). Sin embargo, la simplicidad y la flexibilidad del modelo permiten usarlo para otro tipo de estructuras TFET, como los TFET planares o de nanohílos de una sola puerta (SG TFETs). El modelo es verificado con las simulaciones TCAD, así como con medidas experimentales de TFET fabricados. El modelo de capacitancia también incluye el efecto de los elementos parásitos. Además, en el contexto de este trabajo también se investiga la influencia de los contactos de barrera Schottky en el comportamiento capacitivo de los TFET. Este modelo finalmente se combina con un modelo DC compacto existente para formar un modelo TFET compacto completo. A continuación, el modelo compacto se implementa para simulaciones transitorias de circuitos osciladores de anillo basados en TFET.Miniaturization of the MOSFETs on the integrated circuits has elevated the microelectronic technology. This trend also increases the degree of complexity of these circuits and their building blocks. In conventional MOSFETs the current is based on the thermionic—emission of charge carrier, which therefore limits the subthreshold swing in these transistors to 60 mV/dec. Hence, to overcome this limit and continue with down scaling to keep pace with the Moor’s law, alternative structures are required. Among these, the tunnel—field—effect transistor (TFET) is considered as a potential successor of the MOSFET. Due to its alternative current transport mechanism, known as band—to—band (B2B) tunneling, the subthreshold swing in TFETs can overcome the 60 mV/dec limit. In order to comprehend and estimate the behavior of TFETs, not only as a single element but also on the circuit level, a compact model of this device is required. In this dissertation a charge –based model to describes the capacitive behavior of a double—gate (DG) TFET is presented. However, simplicity and flexibility of the model allow to use it for other type of TFET structures such as single—gate (SG) planar or nanowire TFETs. The model is verified with the TCAD simulations as well as the measurement data of fabricated TFETs. The capacitance model also includes the effect of the parasitic elements. Furthermore, in the context of this work also the influence of Schottky barrier contacts on the capacitive behavior of TFETs is investigated. This model is finally combined with an existing compact DC model to form a complete compact TFET model. The compact model is then implemented for transient simulations of TFET—based inverter and ring—oscillator circuits

Design and performance analysis of Tri-gate GaN HEMTs

GaN-based high electron mobility transistors (HEMT) are promising devices for radio frequency (RF) and high-power electronics and are already in use for RF power amplifiers and for power switches. Commonly, these devices are normally-on transistors, i.e., they are in the on-state at zero applied gate voltage, what limits their suitability for various applications, such as fail-safe power switches and RF amplifiers with single-polarity power supply. Unfortunately, in contrast to GaAs- and InP HEMTs, achieving normally-off operation, i.e., a positive thresh-old voltage, for GaN heterostructures is difficult due to the high density of the polarization-induced two-dimensional electron gas (2DEG) at the barrier/buffer interface. For fast RF HEMTs, short gates are required. However, HEMTs with aggres-sively scaled gate length frequently suffer from short-channel effects caused by a degraded control of the gate over the channel. This leads to a deterioration of the transistors off-state performance (increased subthreshold swing and drain-induced barrier lowering) and on-state behavior (increased drain conductance). The tri-gate design has recently been applied to MOSFETs and HEMTs to improve the gate control and suppress short channel effects. Experimental tri-gate transistors show excellent down-scaling characteristics, improved performance, and, in particular for GaN tri-gate HEMTs, a significant shift of the threshold voltage toward positive values. On the other hand, tri-gate GaN normally-off HEMTs are still suffering from increased parasitics causing degraded RF performance (particularly in terms of cutoff frequency) compared to their planar counterparts. Improving the RF performance of GaN tri-gate HEMTs by reducing the parasitics is essential, but this requires a deep understanding of device physics and a thorough analysis of the root causes. In the present work, in-depth theoretical investigations of GaN tri-gate HEMT operation are performed and extensive simulation studies for these devices are conducted. As a result of these efforts, improved insights in the physics of GaN tri-gate HEMTs are achieved, the potential of this transistor type is assessed, design guidelines are elaborated, and advantageous designs are developed. It is shown that the 2DEG sheet density decreases by shrinking the body width, that the threshold voltage of GaN tri-gate HEMTs strongly depends on the width of AlGaN/GaN bodies, and that solely by decreasing the body width a transition from normally-on to normally-off operation can be achieved. The separation between adjacent bodies is shown to have less impact on threshold voltage. The results also show that for wide bodies (> 200 nm) the channel is controlled by both the top-gate and the sidewall gates, while for decreasing body width the control by top-gate gradually diminishes and the channel will be only controlled by side-gates. Furthermore, the impact of AlGaN barrier design (Al content, thickness) is studied, and the results show a limited dependency of the threshold voltage on the barrier design for very narrow bodies. The tri-gate concept enables normally-off operation, provides improved on-state performance (higher transconductance), and effectively suppresses short-channel effects in the off-state. Moreover, the simulation results show that GaN tri-gate HEMTs can exhibit higher breakdown voltages and operate closer to the theoretical limit for GaN devices than their planar counterparts. Moreover, the simulations indicate that the RF performance of GaN tri-gate HEMTs with optimized body designs can be superior to that of conventional planar devices. A means to improve the RF performance is the reduction of the body etch height, leading to a decreased parasitic coupling between the sidewalls and the source/drain electrodes. Thus, reducing the body height leads to a decreased overall gate capacitance and an improved RF performance. Another way to reduce the overall gate capacitance is to cover the body sidewalls with a dielectric (e.g. SiN). This reduces the fringing capacitance components since the gap between neighboring bodies that is filled with gate metal is narrower compared to the case without dielectrics. Finally, the polarization charge at the barrier/channel interface and thus the electron density in the 2DEG) can be increased either by increasing the aluminium content of the AlGaN barrier or by using a different barrier material (e.g., lattice matched In0.17 Al0.83 N). In the frame of a joint DFG project, GaN tri-gate HEMTs designed based on the improved insights in the physics of these devices have been fabricated and characterized at Fraunhofer IAF. These devices having a gate length of 100 nm are by far the fastest GaN tri-gate HEMTs worldwide and show record performance in terms of cutoff frequency (120 GHz) and maximum frequency of oscillation (300 GHz).HEMTs (high electron mobility transistors) auf GaN-Basis besitzen großes Potenzial für die HF- (Hochfrequenz) und Leistungselektronik und werden bereits in HF-Leistungsverstärkern und als Leistungsschalter verwendet. Üblicherweise sind GaN HEMTs Normally-On Transistoren (d.h. Transistoren, die sich bei einer Gatespannung von 0 V im Ein-Zustand befinden), was für Anwendungen wie Fail-Safe-Leistungsschalter und HF-Verstärker mit nur einer Versorgungsspannung nachteilig ist. Es schwierig, GaN HEMTs mit Normally-Off-Charakteristik (HEMTs mit positiver Schwellspannung) zu realisieren, da in diesen Transistoren die Dichte des sich an der Grenzfläche Barriere/Puffer ausbildenden 2DEG (zweidimensionales Elektronengas) auf Grund starker Polarisationseffekte erheblich größer als in GaAs und InP HEMTs ist. Die Realisierung schneller HF-HEMTs erfordert kurze Gates. Allerdings leiden Transistoren mit sehr kurzen Gates häufig unter Kurzkanaleffekten und einer reduzierten Steuerwirkung des Gates, was zu einer Verschlechterung des Verhaltens im Aus-Zustand (erhöhte Werte für den Subthreshold Swing und das Drain-Induced Barrier Low-ering) und im Ein-Zustand (erhöhter Drainleitwert) führt. In jüngster Zeit wird bei MOSFETs und HEMTs das Tri-Gate-Design angewendet, um die Gatesteuerwirkung zu verbessern und Kurzkanaleffekte zu unterdrücken. So wurden bereits Tri-Gate-Transistoren mit ausgezeichnetem Skalierungsverhalten, verbesserten Eigenschaften und, speziell im Fall von GaN Tri-Gate-HEMTs, positiver Schwellspannung, demonstriert. Auf der anderen Seite leiden GaN Tri-Gate-HEMTs mit Normally-Off-Charakteristik jedoch unter großen Parasitäten, die das HF-Verhalten (insbesondere die Transitfrequenz) beeinträchtigen. Die Verbesserung des HF-Verhaltens und eine Reduzierung der Parasitäten von GaN Tri-Gate-HEMTs ist daher dringend nötig. Das erfordert jedoch ein tiefes Eindringen in die Physik dieser Bauelemente. In der vorliegenden Arbeit werden umfassende theoretische Untersuchungen und Bauelementesimulationen zu GaN Tri-Gate-HEMT beschrieben, die zu einem deutlichen verbesserten Verständnis der Wirkungsweise von GaN Tri-Gate-HEMTs führten. So konnten das Potential dieses Transistortyps bewertet, Designregeln erarbeitet und vorteilhafte Transistordesigns entwickelt werden. In der Arbeit wird gezeigt, dass eine Verringerung der Bodyweite bei gegebener Gatespannung zu einer Verringerung der Ladungsträgerdichte im 2DEG führt, dass die Schwellspannung maßgeblich von der Bodyweite bestimmt wird und dass bei hinreichend geringer Bodyweite der Übergang vom Normall-On- zum Normally-Off-Betrieb erfolgt. Es wird auch gezeigt, dass der Abstand zwischen benachbarten Bodies nur einen geringen Einfluss auf die Schwellspannung hat. Darüber hinaus wird demonstriert, dass im Fall weiter Bodies (> 200 nm) der Kanal sowohl durch das Top-Gate als auch durch die Seiten-Gates gesteuert wird, während bei schmaleren Bodies die Steuerwirkung durch das Top-Gate geringer wird und die Verhältnisse im Kanal im Wesentlichen durch das Seiten-Gates bestimmt werden. In der Arbeit wird weiterhin Rolle des Designs der AlGaN-Barriere (Al-Gehalt, Dicke) untersucht und demonstriert, dass die Gestaltung der Barriere bei schmalen Bodies nur einen begrenzten Einfluss auf die Schwellspannung hat. Die Untersuchungen zeigen deutlich, dass das mit dem Tri-Gate-Konzept Normally-Off-Transistoren realisierbar sind, dass das Transistorverhalten im Ein-Zustand verbessert (höhere Steilheit) wird, und dass Kurzkanaleffekte im Aus-Zustand wirkungsvoll unterdrückt. Es wird auch demonstriert, dass GaN Tri-Gate HEMTs höhere Durchbruchspannungen zeigen und näher an der theoretischen Grenze für GaN-Bauelemente arbeiten als planare GaN HEMTs. Ein weiteres Ergebnis der vorliegenden Arbeit ist der Nachweis, dass GaN Tri-Gate-HEMTs mit sorgfältig optimiertem Design den planaren HEMTs auch hinsichtlich des HF-Verhaltens überlegen sind. Ein Mittel zur Verbesserung des HF-Verhaltens ist die Reduzierung der Body-Ätzhöhe, die zur Verringerung der parasitären Kopplung zwischen den Body-Seitenwänden und den Source/Drain-Elektroden und somit zu einer geringeren Gatekapazität führt. Eine weitere Maßnahme zur Reduzierung der Gatekapazität ist die Beschichtung der Body-Seitenwände mit einem Dielektrikum (z.B. SiN). Das verringert die Streukapazität, da jetzt die mit dem Gatemetall gefüllte Lücken zwischen benachbarten Bodies schmaler sind. Schließlich wird gezeigt, dass die Polarisationsladung an der Grenzfläche Barrier/Kanal und somit die Elektronendichte im 2DEG durch Erhöhung des Al-Gehalts der AlGaN-Barriere oder durch Nutzung eines anderen Materials für die Barriere (z.B. gitterangepasstes In0.17 Al0.83 N) gesteigert werden kann

Sub-10nm Transistors for Low Power Computing: Tunnel FETs and Negative Capacitance FETs

One of the major roadblocks in the continued scaling of standard CMOS technology is its alarmingly high leakage power consumption. Although circuit and system level methods can be employed to reduce power, the fundamental limit in the overall energy efficiency of a system is still rooted in the MOSFET operating principle: an injection of thermally distributed carriers, which does not allow subthreshold swing (SS) lower than 60mV/dec at room temperature. Recently, a new class of steep-slope devices like Tunnel FETs (TFETs) and Negative-Capacitance FETs (NCFETs) have garnered intense interest due to their ability to surpass the 60mV/dec limit on SS at room temperature. The focus of this research is on the simulation and design of TFETs and NCFETs for ultra-low power logic and memory applications. Using full band quantum mechanical model within the Non-Equilibrium Greens Function (NEGF) formalism, source-underlapping has been proposed as an effective technique to lower the SS in GaSb-InAs TFETs. Band-tail states, associated with heavy source doping, are shown to significantly degrade the SS in TFETs from their ideal value. To solve this problem, undoped source GaSb-InAs TFET in an i-i-n configuration is proposed. A detailed circuit-to-system level evaluation is performed to investigate the circuit level metrics of the proposed devices. To demonstrate their potential in a memory application, a 4T gain cell (GC) is proposed, which utilizes the low-leakage and enhanced drain capacitance of TFETs to realize a robust and long retention time GC embedded-DRAMs. The device/circuit/system level evaluation of proposed TFETs demonstrates their potential for low power digital applications. The second part of the thesis focuses on the design space exploration of hysteresis-free Negative Capacitance FETs (NCFETs). A cross-architecture analysis using HfZrOx ferroelectric (FE-HZO) integrated on bulk MOSFET, fully-depleted SOI-FETs, and sub-10nm FinFETs shows that FDSOI and FinFET configurations greatly benefit the NCFET performance due to their undoped body and improved gate-control which enables better capacitance matching with the ferroelectric. A low voltage NC-FinFET operating down to 0.25V is predicted using ultra-thin 3nm FE-HZO. Next, we propose one-transistor ferroelectric NOR type (Fe-NOR) non-volatile memory based on HfZrOx ferroelectric FETs (FeFETs). The enhanced drain-channel coupling in ultrashort channel FeFETs is utilized to dynamically modulate memory window of storage cells thereby resulting in simple erase-, program-and read-operations. The simulation analysis predicts sub-1V program/erase voltages in the proposed Fe-NOR memory array and therefore presents a significantly lower power alternative to conventional FeRAM and NOR flash memories

Multiple-Independent-Gate Field-Effect Transistors for High Computational Density and Low Power Consumption

Transistors are the fundamental elements in Integrated Circuits (IC). The development of transistors significantly improves the circuit performance. Numerous technology innovations have been adopted to maintain the continuous scaling down of transistors. With all these innovations and efforts, the transistor size is approaching the natural limitations of materials in the near future. The circuits are expected to compute in a more efficient way. From this perspective, new device concepts are desirable to exploit additional functionality. On the other hand, with the continuously increased device density on the chips, reducing the power consumption has become a key concern in IC design. To overcome the limitations of Complementary Metal-Oxide-Semiconductor (CMOS) technology in computing efficiency and power reduction, this thesis introduces the multiple- independent-gate Field-Effect Transistors (FETs) with silicon nanowires and FinFET structures. The device not only has the capability of polarity control, but also provides dual-threshold- voltage and steep-subthreshold-slope operations for power reduction in circuit design. By independently modulating the Schottky junctions between metallic source/drain and semiconductor channel, the dual-threshold-voltage characteristics with controllable polarity are achieved in a single device. This property is demonstrated in both experiments and simulations. Thanks to the compact implementation of logic functions, circuit-level benchmarking shows promising performance with a configurable dual-threshold-voltage physical design, which is suitable for low-power applications. This thesis also experimentally demonstrates the steep-subthreshold-slope operation in the multiple-independent-gate FETs. Based on a positive feedback induced by weak impact ionization, the measured characteristics of the device achieve a steep subthreshold slope of 6 mV/dec over 5 decades of current. High Ion/Ioff ratio and low leakage current are also simultaneously obtained with a good reliability. Based on a physical analysis of the device operation, feasible improvements are suggested to further enhance the performance. A physics-based surface potential and drain current model is also derived for the polarity-controllable Silicon Nanowire FETs (SiNWFETs). By solving the carrier transport at Schottky junctions and in the channel, the core model captures the operation with independent gate control. It can serve as the core framework for developing a complete compact model by integrating advanced physical effects. To summarize, multiple-independent-gate SiNWFETs and FinFETs are extensively studied in terms of fabrication, modeling, and simulation. The proposed device concept expands the family of polarity-controllable FETs. In addition to the enhanced logic functionality, the polarity-controllable SiNWFETs and FinFETs with the dual-threshold-voltage and steep-subthreshold-slope operation can be promising candidates for future IC design towards low-power applications

Determination of key device parameters for short- and long-channel Schottky-type carbon nanotube field-effect transistors

The Schottky barrier, contact resistance and carrier mobility in carbon nanotube (CNT) field-effect transistors (FETs) are discussed in detail in this thesis. Novel extraction methods and definitions are proposed for these parameters. A technology comparison with other emerging transistor technologies and a performance projection study are also presented. A Schottky barrier height extraction method for CNTFETs considering one-dimensional (1D) conditions is developed. The methodology is applied to simulation and experimental data of CNTFETs feasible for manufacturing. Y-function-based methods (YFMs) have been applied to simulation and experimental data in order to extract a contact resistance for CNTFETs. Both extraction methods are more efficient and accurate than other conventional approaches. Practical mobility expressions are derived for CNTFETs covering the ballistic as well as the non-ballistic transport regime which enable a straightforward evaluation of the transport in CNTs. They have been applied to simulation and experimental data of devices with different channel lengths and Schottky barrier heights. A comparison of fabricated emerging transistors based on similar criteria for various application scenarios reveals CNTFETs as promising candidates to compete with Si-based technologies in low-power static and dynamic applications. A performance projection study is suggested for specific applications in terms of the studied design parameters

Planar Electrostatically Doped Reconfigurable Schottky Barrier FDSOI Field-Effect Transistor Structures

In the last 50 years, our economy and society have obviously been influenced and shaped to a great extent by electronic devices. This substantial impact of electronics is the result of a continuous performance improvement based on the scaling, i.e. shrinking, of MOSFET devices in complementary integrated circuits, following Moore's law. As the MOSFET feature sizes are approaching atomistic dimensions, the scaling trend slowed down considerably and is even threatened for sub-10 nm technology nodes. Further, additional advancements are increasingly difficult to realize both from the technological and especially the economical perspective. Therefore, technologies that have the potential to supersede the CMOS technology in the future are the topic of intensive investigation by both researchers and the industry. An attractive solution is the leveraging of existing semiconductor technologies based on emerging research devices (ERD) offering novel characteristics, which enable new circuit architectures in future nanoscale logic circuits. A possible ERD contender are polarity controllable or reconfigurable MOSFET (RFET) concepts. Generally, RFET devices are able to switch between n- and p-type conduction by the application of an electrical signal. Therefore, RFET promise increased complex systems with a lower device count decreasing the costs per basic logic function based on their higher logic expressiveness. The focus of this work lies in the successful transfer of a predecessor silicon nanowire (NW) RFET technology into a planar RFET device, while simultaneously optimizing the resulting RFET for reconfigurable as well as conventional CMOS circuits. As for the predecessor NW RFET, the planar approach features a doping-less CMOS compatible fabrication process on a conventional SOI substrate and obtains its reconfigurability by electrostatic doping. The device can be regarded as a entanglement of two MOSFET in one structure, i.e. a depletion mode FET centered on top of a backside enhancement mode Schottky barrier FET (SBFET). The backside SBFET establishes the conductive channel consisting of the desired charge carrier type via an appropriate potential on its gate electrode. The topside FET controls the charge carrier flow between source and drain by locally depleting this channel given an opposite potential on its gate electrode with respect to the backside gate electrode. Two generations of devices have been successfully processed, while different gate electrode materials, i.e. nickel, aluminum and reactively sputtered tungsten-titanium-nitride, have been introduced to the device structure. As n- and p-type symmetry of the very same device is essential for RFET circuit design, tungsten-titanium-nitride is experimentally identified as a possible mid-gap metal gate electrode for RFET devices. Also, a Schottky barrier adjustment process for ideal n- and p-type symmetry based on silicide induced dopant segregation is experimentally demonstrated. Extensive electrical characterizations supported by calibrated TCAD simulations are presented, demonstrating experimental sub-threshold slopes of 65 mV/dec and on-to-off current ratios of over 9 decades. Based on TCAD simulations and supported by experimental results, the design space of the device concept is explored in order to gather predictive results for future scaled device optimization. Further, the high temperature (HT) performance is evaluated and compared to the predecessor NW RFET devices as well as to a state-of-the-art industrial high reliability HT MOSFET clearly illustrating the on par performance of the planar RFET concept with respect to off-state leakage current