17,518 research outputs found
Calibration and Sensitivity Analysis of a Stereo Vision-Based Driver Assistance System
Az http://intechweb.org/ alatti "Books" fül alatt kell rákeresni a "Stereo Vision" címre és az 1. fejezetre
Towards Full Automated Drive in Urban Environments: A Demonstration in GoMentum Station, California
Each year, millions of motor vehicle traffic accidents all over the world
cause a large number of fatalities, injuries and significant material loss.
Automated Driving (AD) has potential to drastically reduce such accidents. In
this work, we focus on the technical challenges that arise from AD in urban
environments. We present the overall architecture of an AD system and describe
in detail the perception and planning modules. The AD system, built on a
modified Acura RLX, was demonstrated in a course in GoMentum Station in
California. We demonstrated autonomous handling of 4 scenarios: traffic lights,
cross-traffic at intersections, construction zones and pedestrians. The AD
vehicle displayed safe behavior and performed consistently in repeated
demonstrations with slight variations in conditions. Overall, we completed 44
runs, encompassing 110km of automated driving with only 3 cases where the
driver intervened the control of the vehicle, mostly due to error in GPS
positioning. Our demonstration showed that robust and consistent behavior in
urban scenarios is possible, yet more investigation is necessary for full scale
roll-out on public roads.Comment: Accepted to Intelligent Vehicles Conference (IV 2017
Homography-based ground plane detection using a single on-board camera
This study presents a robust method for ground plane detection in vision-based systems with a non-stationary camera. The proposed method is based on the reliable estimation of the homography between ground planes in successive images. This homography is computed using a feature matching approach, which in contrast to classical approaches to on-board motion estimation does not require explicit ego-motion calculation. As opposed to it, a novel homography calculation method based on a linear estimation framework is presented. This framework provides predictions of the ground plane transformation matrix that are dynamically updated with new measurements. The method is specially suited for challenging environments, in particular traffic scenarios, in which the information is scarce and the homography computed from the images is usually inaccurate or erroneous. The proposed estimation framework is able to remove erroneous measurements and to correct those that are inaccurate, hence producing a reliable homography estimate at each instant. It is based on the evaluation of the difference between the predicted and the observed transformations, measured according to the spectral norm of the associated matrix of differences. Moreover, an example is provided on how to use the information extracted from ground plane estimation to achieve object detection and tracking. The method has been successfully demonstrated for the detection of moving vehicles in traffic environments
A machine learning approach to pedestrian detection for autonomous vehicles using High-Definition 3D Range Data
This article describes an automated sensor-based system to detect pedestrians in an autonomous vehicle application. Although the vehicle is equipped with a broad set of sensors, the article focuses on the processing of the information generated by a Velodyne HDL-64E LIDAR sensor. The cloud of points generated by the sensor (more than 1 million points per revolution) is processed to detect pedestrians, by selecting cubic shapes and applying machine vision and machine learning algorithms to the XY, XZ, and YZ projections of the points contained in the cube. The work relates an exhaustive analysis of the performance of three different machine learning algorithms: k-Nearest Neighbours (kNN), Naïve Bayes classifier (NBC), and Support Vector Machine (SVM). These algorithms have been trained with 1931 samples. The final performance of the method, measured a real traffic scenery, which contained 16 pedestrians and 469 samples of non-pedestrians, shows sensitivity (81.2%), accuracy (96.2%) and specificity (96.8%).This work was partially supported by ViSelTR (ref. TIN2012-39279) and cDrone (ref. TIN2013-45920-R) projects of the Spanish Government, and the “Research Programme for Groups of Scientific Excellence at Region of Murcia” of the Seneca Foundation (Agency for Science and Technology of the Region of Murcia—19895/GERM/15). 3D LIDAR has been funded by UPCA13-3E-1929 infrastructure projects of the Spanish Government. Diego Alonso wishes to thank the Spanish Ministerio de Educación, Cultura y Deporte, Subprograma Estatal de Movilidad, Plan Estatal de Investigación Científica y Técnica y de Innovación 2013–2016 for grant CAS14/00238
The NASA SBIR product catalog
The purpose of this catalog is to assist small business firms in making the community aware of products emerging from their efforts in the Small Business Innovation Research (SBIR) program. It contains descriptions of some products that have advanced into Phase 3 and others that are identified as prospective products. Both lists of products in this catalog are based on information supplied by NASA SBIR contractors in responding to an invitation to be represented in this document. Generally, all products suggested by the small firms were included in order to meet the goals of information exchange for SBIR results. Of the 444 SBIR contractors NASA queried, 137 provided information on 219 products. The catalog presents the product information in the technology areas listed in the table of contents. Within each area, the products are listed in alphabetical order by product name and are given identifying numbers. Also included is an alphabetical listing of the companies that have products described. This listing cross-references the product list and provides information on the business activity of each firm. In addition, there are three indexes: one a list of firms by states, one that lists the products according to NASA Centers that managed the SBIR projects, and one that lists the products by the relevant Technical Topics utilized in NASA's annual program solicitation under which each SBIR project was selected
Fish tracking technology development. Phases 1 and 2, project definition desk study and equipment
The document reports on the major findings from a definition study to appraise the options to develop fish tracking equipment, in particular tags and data logging systems, in order to improve the effeciency of the Agency tracking studies and to obtain a greater understanding of fish biology. The definition study was in two parts. The first, Phase 1, collated and evaluated all the known tracking systems that may be suitable for studies of fish which are either produced commercially or have been constructed for specific in-house studies. Phase 2 was an evaluation of all the tracking equipment considered to merit further investigation in Phase 1. The deficiencies between existing and required technologies to improve the efficiency of Agency's tracking studies and to obtain a greater understanding of fish biology are also identified
Bridges Structural Health Monitoring and Deterioration Detection Synthesis of Knowledge and Technology
INE/AUTC 10.0
The Level-0 Muon Trigger for the LHCb Experiment
A very compact architecture has been developed for the first level Muon
Trigger of the LHCb experiment that processes 40 millions of proton-proton
collisions per second. For each collision, it receives 3.2 kBytes of data and
it finds straight tracks within a 1.2 microseconds latency. The trigger
implementation is massively parallel, pipelined and fully synchronous with the
LHC clock. It relies on 248 high density Field Programable Gate arrays and on
the massive use of multigigabit serial link transceivers embedded inside FPGAs.Comment: 33 pages, 16 figures, submitted to NIM
I-Drive: Modular system architecture and hardware configuration for an intelligent Vehicle research platform
There are many researches in the field of autonomous and Intelligent Vehicle in Malaysia, but most of them never have the chance to be tested in actual environment due to constraints in terms of hardware and its configuration. Thus, this paper aims to share with other researchers in the field of Autonomous and Intelligent Vehicle with our independent modular-based system and hardware configuration of an Autonomous and Intelligent Vehicle research platform at our university. Each of the research projects are represented by a module and they are linked by a communication layer. The modules utilised the communication layers to transmit and received data as a part of system communication network, and finally this configuration build up the whole system. Through this approach, it is hoped that the contribution from each research project leads to fully autonomous vehicle and intelligent vehicle. The proposed modular system and hardware configuration have been successfully verified via our platform through lane-keeping research. The proposed platform is demonstrated via I-DRIVE (Intelligent Drive Vehicle) on the standard testing track and Malaysia highway road
- …