21 research outputs found

    Design of Low-Capacitance Electrostatic Discharge (ESD) Protection Devices in Advanced Silicon Technologies.

    Get PDF
    Electrostatic discharge (ESD) related failure is a major IC reliability concern and this is particularly true as technology continues shrink to nano-metric dimensions. ESD design window research shows that ESD robustness of victim devices keep decreasing from 350nm bulk technology to 7nm FinFET technologies. In the meantime, parasitic capacitance of ESD diode with same It2 in FinFET technologies is approximately 3X compared with that in planar technologies. Thus transition from planar to FinFET technology requires more robust ESD protection however the large parasitic capacitance of ESD protection cell is problematic in high-speed interface design. To reduce the parasitic capacitance, a dual diode silicon controlled rectifier (DD-SCR) is presented in this dissertation. This design can exhibit good trade-offs between ESD robustness and parasitic capacitance characteristics. Besides, different bounding materials lead to performance variations in DD-SCRs are compared. Radio frequency (RF) technology is also demanded low capacitance ESD protection. To address this concern, a ?-network is presented, providing robust ESD protection for 10-60 GHz RF circuit. Like a low pass ? filter, the network can reflect high frequency RF signals and transmit low frequency ESD pulses. Given proper inductor value, networks can work as robust ESD solutions at a certain Giga Hertz frequency range, making this design suitable for broad band protection in RF input/outputs (I/Os). To increase the holding voltage and reduce snapback, a resistor assist triggering heterogeneous stacking structure is presented in this dissertation, which can increase the holding voltage and also keep the trigger voltage nearly as same as a single SCR device

    Conception, fabrication et caractérisation de dispositifs innovants de protection contre les décharges électrostatiques en technologie FDSOI

    Get PDF
    FDSOI architecture (Fully Depleted Silicon On Insulator) allows a significantimprovement of the electrostatic behavior of the MOSFETs transistors for the advancedtechnologies. It is industrially employed from the 28 nm node. However, theimplementation of ESD (Electrostatic Discharges) protections in these technologies isstill a challenge. While the standard approach relies on SOI substrate hybridization (byetching the BOX (buried oxide)), allowing to fabricate vertical power devices, we focushere on structures where the current flows laterally, in the silicon film. In this work,alternative approaches using innovative devices (Z²-FET and BBC-T) are proposed. Theirstatic, quasi-static and transient characteristics are studied in detail, with TCADsimulations and electrical characterizations.L’architecture FDSOI (silicium sur isolant totalement déserté) permet une amélioration significative du comportement électrostatique des transistors MOSFETs pour les technologies avancées et est employée industriellement à partir du noeud 28 nm.L’implémentation de protections contre les décharges électrostatiques (ESD pour« Electro Static Discharge ») dans ces technologies reste un défi. Alors que l’approche standard repose sur l’hybridation du substrat SOI (gravure de l’oxyde enterré : BOX)permettant de fabriquer des dispositifs de puissance verticaux, nous nous intéressons ici à des structures dans lesquelles la conduction s’effectue latéralement, dans le film de silicium. Dans ces travaux, des approches alternatives utilisant des dispositifs innovants(Z²-FET et BBC-T) sont proposées. Leurs caractéristiques statiques, quasi-statiques et transitoires sont étudiées, par le biais de simulations TCAD et de caractérisations électriques

    Advances in Solid State Circuit Technologies

    Get PDF
    This book brings together contributions from experts in the fields to describe the current status of important topics in solid-state circuit technologies. It consists of 20 chapters which are grouped under the following categories: general information, circuits and devices, materials, and characterization techniques. These chapters have been written by renowned experts in the respective fields making this book valuable to the integrated circuits and materials science communities. It is intended for a diverse readership including electrical engineers and material scientists in the industry and academic institutions. Readers will be able to familiarize themselves with the latest technologies in the various fields

    Electrical overstress and electrostatic discharge failure in silicon MOS devices

    Get PDF
    This thesis presents an experimental and theoretical investigation of electrical failure in MOS structures, with a particular emphasis on short-pulse and ESD failure. It begins with an extensive survey of MOS technology, its failure mechanisms and protection schemes. A program of experimental research on MOS breakdown is then reported, the results of which are used to develop a model of breakdown across a wide spectrum of time scales. This model, in which bulk-oxide electron trapping/emission plays a major role, prohibits the direct use of causal theory over short time-scales, invalidating earlier theories on the subject. The work is extended to ESD stress of both polarities. Negative polarity ESD breakdownis found to be primarily oxide-voltage activated, with no significant dependence on temperature of luminosity. Positive polarity breakdown depends on the rate of surface inversion, dictated by the Si avalanche threshold and/or the generation speed of light-induced carriers. An analytical model, based upon the above theory is developed to predict ESD breakdown over a wide range of conditions. The thesis ends with an experimental and theoretical investigation of the effects of ESD breakdown on device and circuit performance. Breakdown sites are modelled as resistive paths in the oxide, and their distorting effects upon transistor performance are studied. The degradation of a damaged transistor under working stress is observed, giving a deeper insight into the latent hazards of ESD damage

    ELECTROSTATIC DISCHARGE AND ELECTRICAL OVERSTRESS FAILURES OF NON-SILICON DEVICES

    Get PDF
    Electrostatic discharge (ESD) causes a significant percentage of the failures in the electronics industry. The shrinking size of semiconductor circuits, thinner gate oxides, complex chips with multiple power supplies and mixed-signal blocks, larger chip capacitance and faster circuit operation, all contribute to increased ESD sensitivity of advanced semiconductor devices. Therefore, understanding and controlling ESD is indispensable for higher quality and reliability of advanced device technologies. This thesis provides a comprehensive understanding of ESD and EOS failures in GaAs and SiGe devices. In the first part of this thesis, characteristics of internal damage caused by several ESD test models and EOS stress in non-silicon devices (GaAs and SiGe) are identified. Failure signatures are correlated with field failures using various failure analysis techniques. The second part of this thesis discusses the effects of ESD latent damage in GaAs devices. Depending on the stress level, ESD voltage can causes latent failures if the device is repeatedly stressed under low ESD voltage conditions, and can cause premature damage leading eventually to catastrophic failures. Electrical degradation due to ESD-induced latent damage in GaAs MESFETs after cumulative low-level ESD stress is studied. Using failure analysis, combined with electrical characterization, the failure modes and signatures of EOS stressed devices with and without prior low-level ESD stress are compared. To predict the power-to-failure level of GaAs and silicon devices, an ESD failure model using a thermal RC network was developed. A correlation method of the real ESD stress and square wave pulse has been developed. The equivalent duration of the square pulse is calculated and proposed for the HBM ESD stress. The dependence of this value on the ESD stress level and material properties is presented as well

    The 2018 GaN power electronics roadmap

    Get PDF
    GaN is a compound semiconductor that has a tremendous potential to facilitate economic growth in a semiconductor industry that is silicon-based and currently faced with diminishing returns of performance versus cost of investment. At a material level, its high electric field strength and electron mobility have already shown tremendous potential for high frequency communications and photonic applications. Advances in growth on commercially viable large area substrates are now at the point where power conversion applications of GaN are at the cusp of commercialisation. The future for building on the work described here in ways driven by specific challenges emerging from entirely new markets and applications is very exciting. This collection of GaN technology developments is therefore not itself a road map but a valuable collection of global state-of-the-art GaN research that will inform the next phase of the technology as market driven requirements evolve. First generation production devices are igniting large new markets and applications that can only be achieved using the advantages of higher speed, low specific resistivity and low saturation switching transistors. Major investments are being made by industrial companies in a wide variety of markets exploring the use of the technology in new circuit topologies, packaging solutions and system architectures that are required to achieve and optimise the system advantages offered by GaN transistors. It is this momentum that will drive priorities for the next stages of device research gathered here

    CMOS indoor light energy harvesting system for wireless sensing applications

    Get PDF
    Dissertação para obtenção do Grau de Doutor em Engenharia Electrotécnica e de ComputadoresThis research thesis presents a micro-power light energy harvesting system for indoor environments. Light energy is collected by amorphous silicon photovoltaic (a-Si:H PV) cells, processed by a switched-capacitor (SC) voltage doubler circuit with maximum power point tracking (MPPT), and finally stored in a large capacitor. The MPPT Fractional Open Circuit Voltage (VOC) technique is implemented by an asynchronous state machine (ASM) that creates and, dynamically, adjusts the clock frequency of the step-up SC circuit, matching the input impedance of the SC circuit to the maximum power point (MPP) condition of the PV cells. The ASM has a separate local power supply to make it robust against load variations. In order to reduce the area occupied by the SC circuit, while maintaining an acceptable efficiency value, the SC circuit uses MOSFET capacitors with a charge reusing scheme for the bottom plate parasitic capacitors. The circuit occupies an area of 0.31 mm2 in a 130 nm CMOS technology. The system was designed in order to work under realistic indoor light intensities. Experimental results show that the proposed system, using PV cells with an area of 14 cm2, is capable of starting-up from a 0 V condition, with an irradiance of only 0.32 W/m2. After starting-up, the system requires an irradiance of only 0.18 W/m2 (18 mW/cm2) to remain in operation. The ASM circuit can operate correctly using a local power supply voltage of 453 mV, dissipating only 0.085 mW. These values are, to the best of the authors’ knowledge, the lowest reported in the literature. The maximum efficiency of the SC converter is 70.3% for an input power of 48 mW, which is comparable with reported values from circuits operating at similar power levels.Portuguese Foundation for Science and Technology (FCT/MCTES), under project PEst-OE/EEI/UI0066/2011, and to the CTS multiannual funding, through the PIDDAC Program funds. I am also very grateful for the grant SFRH/PROTEC/67683/2010, financially supported by the IPL – Instituto Politécnico de Lisboa

    The 2018 GaN power electronics roadmap

    Get PDF
    Gallium nitride (GaN) is a compound semiconductor that has tremendous potential to facilitate economic growth in a semiconductor industry that is silicon-based and currently faced with diminishing returns of performance versus cost of investment. At a material level, its high electric field strength and electron mobility have already shown tremendous potential for high frequency communications and photonic applications. Advances in growth on commercially viable large area substrates are now at the point where power conversion applications of GaN are at the cusp of commercialisation. The future for building on the work described here in ways driven by specific challenges emerging from entirely new markets and applications is very exciting. This collection of GaN technology developments is therefore not itself a road map but a valuable collection of global state-of-the-art GaN research that will inform the next phase of the technology as market driven requirements evolve. First generation production devices are igniting large new markets and applications that can only be achieved using the advantages of higher speed, low specific resistivity and low saturation switching transistors. Major investments are being made by industrial companies in a wide variety of markets exploring the use of the technology in new circuit topologies, packaging solutions and system architectures that are required to achieve and optimise the system advantages offered by GaN transistors. It is this momentum that will drive priorities for the next stages of device research gathered here

    Topical Workshop on Electronics for Particle Physics

    Get PDF
    corecore