Drivers overtaking cyclists and pedestrians: Modeling road-user behavior for traffic safety

In a world aiming to shift to more sustainable modes of transportation, vulnerable road users (VRUs) like cyclists and pedestrians are still confronted with significant barriers to safety, particularly on rural roads where overtaking maneuvers represent a frequent and dangerous interaction with motorized traffic. If drivers misjudge their kinematics, even near-crashes without physical contact can harm the perceived safety of the VRU, which may decrease the willingness to continue cycling or walking on these roads. Crash risks when overtaking VRUs exist in different overtaking phases: when approaching the VRU, steering out, passing, and eventually returning. To make overtaking VRUs safer, improvements to policymaking, infrastructure, and vehicles are needed. However, these improvements need models that can describe or predict road-user behavior in overtaking, which was the objective of this thesis. Based on data sets obtained from a test-track experiment, field-test studies, and naturalistic studies, this thesis developed behavioral models for both objective and perceived safety of drivers and VRUs in different overtaking phases. The results indicate that drivers’ and VRUs’ behavior is mainly influenced by their highest crash or injury risk. The descriptive models showed that a close oncoming vehicle could reduce a driver’s safety margins to the VRU in all phases. Furthermore, the VRU behavior may affect the driver’s behavior; for instance, through lane positioning and, for pedestrians, walking direction. Infrastructure design and policymaking should focus on preventing overtaking in areas where oncoming vehicles are hard to estimate and enforcing sufficient clearances to the cyclist, stratified by speed. The predictive models can help vehicle safety systems adapt to drivers to become more acceptable, for instance, when assisting drivers in the decision to overtake or not. They may further help optimize road networks’ objective and perceived safety

Towards computational models for road-user interaction: Drivers overtaking pedestrians and cyclists

Introduction: Crashes resulting from a failed interaction between drivers and vulnerable road users, such as pedestrians or cyclists, can lead to severe injuries or fatalities, especially after failed overtaking maneuvers on rural roads where designated refuge areas are often absent, and impact speeds high. This thesis contains two studies that shed light on driver interaction with either 1) a pedestrian or 2) a cyclist, and oncoming traffic while overtaking. Methods: The first study modeled driver behavior in pedestrian-overtaking maneuvers from naturalistic and field test data, quantifying the effect of the pedestrian’s walking direction and position, as well as the presence of oncoming traffic, on the lateral passing distance and overtaking speed. The second study modeled cyclist-overtaking maneuvers with data from a test-track experiment to quantify how the factors time gap to the oncoming traffic and cyclist lane position affect safety metrics during the maneuver and the overtaking strategy (i.e., flying or accelerative, depending on whether the driver overtook before or after the oncoming traffic had passed, respectively). Results: The results showed that, while overtaking, drivers reduced their safety margins to a pedestrian when the pedestrian was walking against the traffic direction, closer to the lane and when oncoming traffic was present. Results for cyclist overtaking were similar, showing that drivers left smaller safety margins when the cyclist rode closer to the center of the lane or when the time gap to the oncoming traffic was shorter. Under these critical conditions, drivers were more likely to opt for an accelerative maneuver than a flying one. The oncoming traffic had the most influence on drivers’ behavior among all modeling factors, in both pedestrian- and cyclist-overtaking maneuvers. Conclusion: Drivers compromised the risk of a head-on collision with the oncoming traffic by increasing the risk of rear-ending or side-swiping the pedestrian or cyclist. This thesis has implications for infrastructure design, policymaking, car assessment programs, and specifically how vehicular active safety systems may benefit from the developed models to allow more timely and yet acceptable activations

AI4People: Ethical Guidelines for the Automotive Sector – Fundamental Requirements and Practical Recommendations

This paper presents the work of the AI4People-Automotive Committee established to advise more concretely on specific ethical issues that arise from autonomous vehicles (AVs). Practical recommendations for the automotive sector are provided across the topic areas: human agency and oversight, technical robustness and safety, privacy and data governance, transparency, diversity, non-discrimination and fairness, societal and environmental wellbeing, as well as accountability. By doing so, this paper distinguishes between policy recommendations that aim to assist policymakers in setting acceptable standards and industry recommendations that formulate guidelines for companies across their value chain. In the future, the automotive sector may rely on these recommendations to determine relevant next steps and to ensure that AVs comply with ethical principles.publishedVersio

Situational Awareness Enhancement for Connected and Automated Vehicle Systems

Recent developments in the area of Connected and Automated Vehicles (CAVs) have boosted the interest in Intelligent Transportation Systems (ITSs). While ITS is intended to resolve and mitigate serious traffic issues such as passenger and pedestrian fatalities, accidents, and traffic congestion; these goals are only achievable by vehicles that are fully aware of their situation and surroundings in real-time. Therefore, connected and automated vehicle systems heavily rely on communication technologies to create a real-time map of their surrounding environment and extend their range of situational awareness. In this dissertation, we propose novel approaches to enhance situational awareness, its applications, and effective sharing of information among vehicles.;The communication technology for CAVs is known as vehicle-to-everything (V2x) communication, in which vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) have been targeted for the first round of deployment based on dedicated short-range communication (DSRC) devices for vehicles and road-side transportation infrastructures. Wireless communication among these entities creates self-organizing networks, known as Vehicular Ad-hoc Networks (VANETs). Due to the mobile, rapidly changing, and intrinsically error-prone nature of VANETs, traditional network architectures are generally unsatisfactory to address VANETs fundamental performance requirements. Therefore, we first investigate imperfections of the vehicular communication channel and propose a new modeling scheme for large-scale and small-scale components of the communication channel in dense vehicular networks. Subsequently, we introduce an innovative method for a joint modeling of the situational awareness and networking components of CAVs in a single framework. Based on these two models, we propose a novel network-aware broadcast protocol for fast broadcasting of information over multiple hops to extend the range of situational awareness. Afterward, motivated by the most common and injury-prone pedestrian crash scenarios, we extend our work by proposing an end-to-end Vehicle-to-Pedestrian (V2P) framework to provide situational awareness and hazard detection for vulnerable road users. Finally, as humans are the most spontaneous and influential entity for transportation systems, we design a learning-based driver behavior model and integrate it into our situational awareness component. Consequently, higher accuracy of situational awareness and overall system performance are achieved by exchange of more useful information

Multi-Actuated Vehicle Control and Path Planning/Tracking at Handling Limits

The increasing requirements for vehicle safety along with the impressive progress in vehicle actuation technologies have motivated manufacturers to equip vehicles with multiple control actuations that enhance handling and stability. Moreover, multiple control objectives arise in vehicle dynamics control problems, such as yaw rate control and rollover prevention, therefore, vehicle control problems can be defined as multi-actuation multi-objective vehicle control problems. Recently, the importance of integrating vehicle control systems has been highlighted in the literature. This integration allows us to prevent the potential conflicting control commands that could be generated by individual controllers. Existing studies on multi-actuated vehicle control offer a coordinated control design that shares the required control effort between the actuations. However, they mostly lack an appropriate strategy for considering the differences among vehicle actuations in their energy usage, capabilities, and effectiveness in any given vehicle states. Therefore, it is very important to develop a cost-performance strategy for optimally controlling multi-actuated vehicles. In this thesis, a prioritization model predictive control design is proposed for multi-actuated vehicles with multiple control objectives. The designed controller prioritizes the control actuations and control objectives based on, respectively, their advantages and their importance, and then combines the priorities such that a low priority actuation will not kick in unless a high priority objective demands it. The proposed controller is employed for several actuations, including electronic limited slip differential (ELSD), front/rear torque shifting, and differential braking. In this design, differential braking is engaged only when it is necessary, thus limiting or avoiding its disadvantages such as speed reduction and maintenance. In addition, the proposed control design includes a detailed analysis of the above-mentioned actuations in terms of modelling, control, and constraints. A new vehicle prediction model is designed for integrated lateral and roll dynamics that considers the force coupling effect and allows for the optimal control of front/rear torque distribution. The existing methods for ELSD control may result in chattering or unwanted oversteering yaw moments. To resolve this problem, a dynamic model is first designed for the ELSD clutch to properly estimate the clutch torque. This ELSD model is then used to design an intelligent ELSD controller that resolves the issues mentioned above. Experimental tests with two different vehicles are also carried out to evaluate the performance of the prioritization MPC controller in real-time. The results verify the capability of the controller in properly activating the control actuations with the designed priorities to improve vehicle handling and stability in different driving maneuvers. In addition, the test results confirm the performance of the designed ELSD model in ELSD clutch torque estimation and in enabling the controller to prevent unwanted oversteering yaw moments. The designed stability controller is extended to use for emergency collision avoidance in autonomous vehicles. This extension in fact addresses a local path planning/tracking problem with control objectives prioritized as: 1) collision avoidance, 2) vehicle stability, and 3) tracking the desired path. The controller combines a conservative form of torque/brake vectoring with front steering to improve the lateral agility and responsiveness of the vehicle in emergency collision avoidance scenarios. In addition, a contingency MPC controller is designed with two parallel prediction horizons - a nominal horizon and a contingency horizon - to maintain avoidance in identified road condition uncertainties. The performance of the model predictive controllers is evaluated in software simulations with high fidelity CarSim models, in which different sets of actuation configurations in various driving and road conditions are assessed. In addition, the effectiveness of the local path planning/tracking controller is evaluated in several emergency and contingency collision avoidance scenarios

Interactive Motion Planning for Multi-agent Systems with Physics-based and Behavior Constraints

Man-made entities and humans rely on movement as an essential form of interaction with the world. Whether it is an autonomous vehicle navigating crowded roadways or a simulated pedestrian traversing a virtual world, each entity must compute safe, effective paths to achieve their goals. In addition, these entities, termed agents, are subject to unique physical and behavioral limitations within their environment. For example, vehicles have a finite physical turning radius and must obey behavioral constraints such as traffic signals and rules of the road. Effective motion planning algorithms for diverse agents must account for these physics-based and behavior constraints. In this dissertation, we present novel motion planning algorithms that account for constraints which physically limit the agent and impose behavioral limitations on the virtual agents. We describe representational approaches to capture specific physical constraints on the various agents and propose abstractions to model behavior constraints affecting them. We then describe algorithms to plan motions for agents who are subject to the modeled constraints. First, we describe a biomechanically accurate elliptical representation for virtual pedestrians; we also describe human-like movement constraints corresponding to shoulder-turning and side-stepping in dense environments. We detail a novel motion planning algorithm extending velocity obstacles to generate collisionfree paths for hundreds of elliptical agents at interactive rates. Next, we describe an algorithm to encode dynamics and traffic-like behavior constraints for autonomous vehicles in urban and highway environments. We describe a motion planning algorithm to generate safe, high-speed avoidance maneuvers using a novel optimization function and modified control obstacle formulation, and we also present a simulation framework to evaluate driving strategies. Next, we present an approach to incorporate high-level reasoning to model the motions and behaviors of virtual agents in terms of verbal interactions with other agents or avatars. Our approach leverages natural-language interaction to reduce uncertainty and generate effective plans. Finally, we describe an application of our techniques to simulate pedestrian behaviors for gathering simulated data about loading, unloading, and evacuating an aircraft.Doctor of Philosoph

Clothoid-based Planning and Control in Intelligent Vehicles (Autonomous and Manual-Assisted Driving)

[EN] Nowadays, there are many electronic products that incorporate elements and features coming from the research in the field of mobile robotics. For instance, the well-known vacuum cleaning robot Roomba by iRobot, which belongs to the field of service robotics, one of the most active within the sector. There are also numerous autonomous robotic systems in industrial warehouses and plants. It is the case of Autonomous Guided Vehicles (AGVs), which are able to drive completely autonomously in very structured environments. Apart from industry and consumer electronics, within the automotive field there are some devices that give intelligence to the vehicle, derived in most cases from advances in mobile robotics. In fact, more and more often vehicles incorporate Advanced Driver Assistance Systems (ADAS), such as navigation control with automatic speed regulation, lane change and overtaking assistant, automatic parking or collision warning, among other features. However, despite all the advances there are some problems that remain unresolved and can be improved. Collisions and rollovers stand out among the most common accidents of vehicles with manual or autonomous driving. In fact, it is almost impossible to guarantee driving without accidents in unstructured environments where vehicles share the space with other moving agents, such as other vehicles and pedestrians. That is why searching for techniques to improve safety in intelligent vehicles, either autonomous or manual-assisted driving, is still a trending topic within the robotics community. This thesis focuses on the design of tools and techniques for planning and control of intelligent vehicles in order to improve safety and comfort. The dissertation is divided into two parts, the first one on autonomous driving and the second one on manual-assisted driving. The main link between them is the use of clothoids as mathematical formulation for both trajectory generation and collision detection. Among the problems solved the following stand out: obstacle avoidance, rollover avoidance and advanced driver assistance to avoid collisions with pedestrians.[ES] En la actualidad se comercializan infinidad de productos de electrónica de consumo que incorporan elementos y características procedentes de avances en el sector de la robótica móvil. Por ejemplo, el conocido robot aspirador Roomba de la empresa iRobot, el cual pertenece al campo de la robótica de servicio, uno de los más activos en el sector. También hay numerosos sistemas robóticos autónomos en almacenes y plantas industriales. Es el caso de los vehículos autoguiados (AGVs), capaces de conducir de forma totalmente autónoma en entornos muy estructurados. Además de en la industria y en electrónica de consumo, dentro del campo de la automoción también existen dispositivos que dotan de cierta inteligencia al vehículo, derivados la mayoría de las veces de avances en robótica móvil. De hecho, cada vez con mayor frecuencia los vehículos incorporan sistemas avanzados de asistencia al conductor (ADAS por sus siglas en inglés), tales como control de navegación con regulación automática de velocidad, asistente de cambio de carril y adelantamiento, aparcamiento automático o aviso de colisión, entre otras prestaciones. No obstante, pese a todos los avances siguen existiendo problemas sin resolver y que pueden mejorarse. La colisión y el vuelco destacan entre los accidentes más comunes en vehículos con conducción tanto manual como autónoma. De hecho, la dificultad de conducir en entornos desestructurados compartiendo el espacio con otros agentes móviles, tales como coches o personas, hace casi imposible garantizar la conducción sin accidentes. Es por ello que la búsqueda de técnicas para mejorar la seguridad en vehículos inteligentes, ya sean de conducción autónoma o manual asistida, es un tema que siempre está en auge en la comunidad robótica. La presente tesis se centra en el diseño de herramientas y técnicas de planificación y control de vehículos inteligentes, para la mejora de la seguridad y el confort. La disertación se ha dividido en dos partes, la primera sobre conducción autónoma y la segunda sobre conducción manual asistida. El principal nexo de unión es el uso de clotoides como elemento de generación de trayectorias y detección de colisiones. Entre los problemas que se resuelven destacan la evitación de obstáculos, la evitación de vuelcos y la asistencia avanzada al conductor para evitar colisiones con peatones.[CA] En l'actualitat es comercialitzen infinitat de productes d'electrònica de consum que incorporen elements i característiques procedents d'avanços en el sector de la robòtica mòbil. Per exemple, el conegut robot aspirador Roomba de l'empresa iRobot, el qual pertany al camp de la robòtica de servici, un dels més actius en el sector. També hi ha nombrosos sistemes robòtics autònoms en magatzems i plantes industrials. És el cas dels vehicles autoguiats (AGVs), els quals són capaços de conduir de forma totalment autònoma en entorns molt estructurats. A més de en la indústria i en l'electrònica de consum, dins el camp de l'automoció també existeixen dispositius que doten al vehicle de certa intel·ligència, la majoria de les vegades derivats d'avanços en robòtica mòbil. De fet, cada vegada amb més freqüència els vehicles incorporen sistemes avançats d'assistència al conductor (ADAS per les sigles en anglés), com ara control de navegació amb regulació automàtica de velocitat, assistent de canvi de carril i avançament, aparcament automàtic o avís de col·lisió, entre altres prestacions. No obstant això, malgrat tots els avanços segueixen existint problemes sense resoldre i que poden millorar-se. La col·lisió i la bolcada destaquen entre els accidents més comuns en vehicles amb conducció tant manual com autònoma. De fet, la dificultat de conduir en entorns desestructurats compartint l'espai amb altres agents mòbils, tals com cotxes o persones, fa quasi impossible garantitzar la conducció sense accidents. És per això que la recerca de tècniques per millorar la seguretat en vehicles intel·ligents, ja siguen de conducció autònoma o manual assistida, és un tema que sempre està en auge a la comunitat robòtica. La present tesi es centra en el disseny d'eines i tècniques de planificació i control de vehicles intel·ligents, per a la millora de la seguretat i el confort. La dissertació s'ha dividit en dues parts, la primera sobre conducció autònoma i la segona sobre conducció manual assistida. El principal nexe d'unió és l'ús de clotoides com a element de generació de trajectòries i detecció de col·lisions. Entre els problemes que es resolen destaquen l'evitació d'obstacles, l'evitació de bolcades i l'assistència avançada al conductor per evitar col·lisions amb vianants.Girbés Juan, V. (2016). Clothoid-based Planning and Control in Intelligent Vehicles (Autonomous and Manual-Assisted Driving) [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/65072TESI

Computational driver behavior models for vehicle safety applications

The aim of this thesis is to investigate how human driving behaviors can be formally described in mathematical models intended for online personalization of advanced driver assistance systems (ADAS) or offline virtual safety evaluations. Both longitudinal (braking) and lateral (steering) behaviors in routine driving and emergencies are addressed. Special attention is paid to driver glance behavior in critical situations and the role of peripheral vision.First, a hybrid framework based on autoregressive models with exogenous input (ARX-models) is employed to predict and classify driver control in real time. Two models are suggested, one targeting steering behavior and the other longitudinal control behavior. Although the predictive performance is unsatisfactory, both models can distinguish between different driving styles.Moreover, a basic model for drivers\u27 brake initiation and modulation in critical longitudinal situations (specifically for rear-end conflicts) is constructed. The model is based on a conceptual framework of noisy evidence accumulation and predictive processing. Several model extensions related to gaze behavior are also proposed and successfully fitted to real-world crashes and near-crashes. The influence of gaze direction is further explored in a driving simulator study, showing glance response times to be independent of the glance\u27s visual eccentricity, while brake response times increase for larger gaze angles, as does the rate of missed target detections.Finally, the potential of a set of metrics to quantify subjectively perceived risk in lane departure situations to explain drivers\u27 recovery steering maneuvers was investigated. The most influential factors were the relative yaw angle and splay angle error at steering initiation. Surprisingly, it was observed that drivers often initiated the recovery steering maneuver while looking off-road.To sum up, the proposed models in this thesis facilitate the development of personalized ADASs and contribute to trustworthy virtual evaluations of current, future, and conceptual safety systems. The insights and ideas contribute to an enhanced, human-centric system development, verification, and validation process. In the long term, this will likely lead to improved vehicle safety and a reduced number of severe injuries and fatalities in traffic

Development of pedestrian collision avoidance strategy based on the fusion of Markov and social force models

In urban traffic, accurate prediction of pedestrian trajectory and advanced collision avoidance strategy can effectively reduce the collision risk between intelligent vehicles and pedestrians. In order to improve the prediction accuracy of pedestrian trajectory and the safety of collision avoidance, a longitudinal and lateral intelligent collision avoidance strategy based on pedestrian trajectory prediction is proposed. Firstly, the process of a pedestrian crossing the road is considered as a combination of free motion described by first-order Markov model and the constrained motion presented by improved social force model. The predicted pedestrian trajectory is obtained by weighted fusion of the trajectories of the two models with a multiple linear regression algorithm. Secondly, according to the predicted pedestrian trajectory and time to collision (TTC) the longitudinal and lateral collision avoidance strategy is designed. The improved artificial potential field method is used to plan the lateral collision avoidance path in real time based on the predicted pedestrian position, and a fuzzy controller is constructed to obtain the desired deceleration of the vehicle. Finally, the pedestrian motion fusion model and the longitudinal and lateral collision avoidance strategy are verified by Prescan and Simulink co-simulation. The results show that the average displacement error (ADE) and final displacement error (FDE) of pedestrian trajectory based on pedestrian motion fusion model are smaller compared with a Markov model and improved social force model, and the proposed pedestrian collision avoidance strategy can effectively achieve longitudinal and lateral collision avoidance.</p

A comprehensive survey on cooperative intersection management for heterogeneous connected vehicles

Nowadays, with the advancement of technology, world is trending toward high mobility and dynamics. In this context, intersection management (IM) as one of the most crucial elements of the transportation sector demands high attention. Today, road entities including infrastructures, vulnerable road users (VRUs) such as motorcycles, moped, scooters, pedestrians, bicycles, and other types of vehicles such as trucks, buses, cars, emergency vehicles, and railway vehicles like trains or trams are able to communicate cooperatively using vehicle-to-everything (V2X) communications and provide traffic safety, efficiency, infotainment and ecological improvements. In this paper, we take into account different types of intersections in terms of signalized, semi-autonomous (hybrid) and autonomous intersections and conduct a comprehensive survey on various intersection management methods for heterogeneous connected vehicles (CVs). We consider heterogeneous classes of vehicles such as road and rail vehicles as well as VRUs including bicycles, scooters and motorcycles. All kinds of intersection goals, modeling, coordination architectures, scheduling policies are thoroughly discussed. Signalized and semi-autonomous intersections are assessed with respect to these parameters. We especially focus on autonomous intersection management (AIM) and categorize this section based on four major goals involving safety, efficiency, infotainment and environment. Each intersection goal provides an in-depth investigation on the corresponding literature from the aforementioned perspectives. Moreover, robustness and resiliency of IM are explored from diverse points of view encompassing sensors, information management and sharing, planning universal scheme, heterogeneous collaboration, vehicle classification, quality measurement, external factors, intersection types, localization faults, communication anomalies and channel optimization, synchronization, vehicle dynamics and model mismatch, model uncertainties, recovery, security and privacy