Sensorless SVPWM-FADTC of a new flux-modulated permanent-magnet wheel motor based on a wide-speed sliding mode observer

published_or_final_versio

Fixed Switching Period Discrete-Time Sliding Mode Current Control of a PMSM

© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksA fixed switching period sliding mode control (SMC) for Permanent Magnet Synchronous Machines (PMSMs) is presented. The aim of the paper is to design a SMC that improves the traditional PI based Field Oriented Control (FOC) transient response, as well as to reduce the switching frequency variations of the Direct Torque Control (DTC). Such SMC requires a decoupling method of the control actions, which also brings constant switching functions slopes. These constant slopes allow to calculate the required hysteresis band value to control the switching frequency. The digital implementation degrades the performance of the hysteresis comparator and as a consequence, the previously calculated band becomes inaccurate to regulate the switching frequency. In order to recover the analogue hysteresis band comparator performance, a predictive algorithm is proposed. Finally, a set of experimental results with constant switching frequency during a torque reversal and speed control tests are provided.Peer ReviewedPostprint (author's final draft

Advanced Electrical Machines and Machine-Based Systems for Electric and Hybrid Vehicles

The paper presents a number of advanced solutions on electric machines and machine-based systems for the powertrain of electric vehicles (EVs). Two types of systems are considered, namely the drive systems designated to the EV propulsion and the power split devices utilized in the popular series-parallel hybrid electric vehicle architecture. After reviewing the main requirements for the electric drive systems, the paper illustrates advanced electric machine topologies, including a stator permanent magnet (stator-PM) motor, a hybrid-excitation motor, a flux memory motor and a redundant motor structure. Then, it illustrates advanced electric drive systems, such as the magnetic-geared in-wheel drive and the integrated starter generator (ISG). Finally, three machine-based implementations of the power split devices are expounded, built up around the dual-rotor PM machine, the dual-stator PM brushless machine and the magnetic-geared dual-rotor machine. As a conclusion, the development trends in the field of electric machines and machine-based systems for EVs are summarized

Design and Control of Electrical Motor Drives

Dear Colleagues, I am very happy to have this Special Issue of the journal Energies on the topic of Design and Control of Electrical Motor Drives published. Electrical motor drives are widely used in the industry, automation, transportation, and home appliances. Indeed, rolling mills, machine tools, high-speed trains, subway systems, elevators, electric vehicles, air conditioners, all depend on electrical motor drives.However, the production of effective and practical motors and drives requires flexibility in the regulation of current, torque, flux, acceleration, position, and speed. Without proper modeling, drive, and control, these motor drive systems cannot function effectively.To address these issues, we need to focus on the design, modeling, drive, and control of different types of motors, such as induction motors, permanent magnet synchronous motors, brushless DC motors, DC motors, synchronous reluctance motors, switched reluctance motors, flux-switching motors, linear motors, and step motors.Therefore, relevant research topics in this field of study include modeling electrical motor drives, both in transient and in steady-state, and designing control methods based on novel control strategies (e.g., PI controllers, fuzzy logic controllers, neural network controllers, predictive controllers, adaptive controllers, nonlinear controllers, etc.), with particular attention to transient responses, load disturbances, fault tolerance, and multi-motor drive techniques. This Special Issue include original contributions regarding recent developments and ideas in motor design, motor drive, and motor control. The topics include motor design, field-oriented control, torque control, reliability improvement, advanced controllers for motor drive systems, DSP-based sensorless motor drive systems, high-performance motor drive systems, high-efficiency motor drive systems, and practical applications of motor drive systems. I want to sincerely thank authors, reviewers, and staff members for their time and efforts. Prof. Dr. Tian-Hua Liu Guest Edito

State feedback control for a PM hub motor based on gray Wolf optimization algorithm

© 1986-2012 IEEE. This paper presents an optimal control strategy for a permanent-magnet synchronous hub motor (PMSHM) drive using the state feedback control method plus the gray wolf optimization (GWO) algorithm. First, the linearized PMSHM mathematical model is obtained by voltage feedforward compensation. Second, to acquire satisfactory dynamics of speed response and zero d-axis current, the discretized state-space model of the PMSHM is augmented with the integral of rotor speed error and integral of d-axis current error. Then, the GWO algorithm is employed to acquire the weighting matrices Q and R in linear quadratic regulator optimization process. Moreover, a penalty term is introduced to the fitness index to suppress overshoots effectively. Finally, comparisons among the GWO-based state feedback controller (SFC) with and without the penalty term, the conventional SFC, and the genetic algorithm enhanced proportional-integral controllers are conducted in both simulations and experiments. The comparison results show the superiority of the proposed SFC with the penalty term in fast response

Advances in Rotating Electric Machines

It is difficult to imagine a modern society without rotating electric machines. Their use has been increasing not only in the traditional fields of application but also in more contemporary fields, including renewable energy conversion systems, electric aircraft, aerospace, electric vehicles, unmanned propulsion systems, robotics, etc. This has contributed to advances in the materials, design methodologies, modeling tools, and manufacturing processes of current electric machines, which are characterized by high compactness, low weight, high power density, high torque density, and high reliability. On the other hand, the growing use of electric machines and drives in more critical applications has pushed forward the research in the area of condition monitoring and fault tolerance, leading to the development of more reliable diagnostic techniques and more fault-tolerant machines. This book presents and disseminates the most recent advances related to the theory, design, modeling, application, control, and condition monitoring of all types of rotating electric machines