A Selective Change Driven System for High-Speed Motion Analysis

Vision-based sensing algorithms are computationally-demanding tasks due to the large amount of data acquired and processed. Visual sensors deliver much information, even if data are redundant, and do not give any additional information. A Selective Change Driven (SCD) sensing system is based on a sensor that delivers, ordered by the magnitude of its change, only those pixels that have changed most since the last read-out. This allows the information stream to be adjusted to the computation capabilities. Following this strategy, a new SCD processing architecture for high-speed motion analysis, based on processing pixels instead of full frames, has been developed and implemented into a Field Programmable Gate-Array (FPGA). The programmable device controls the data stream, delivering a new object distance calculation for every new pixel. The acquisition, processing and delivery of a new object distance takes just 1.7 μ s. Obtaining a similar result using a conventional frame-based camera would require a device working at roughly 500 Kfps, which is far from being practical or even feasible. This system, built with the recently-developed 64 × 64 CMOS SCD sensor, shows the potential of the SCD approach when combined with a hardware processing system

Bio-inspired electronics for micropower vision processing

Vision processing is a topic traditionally associated with neurobiology; known to encode, process and interpret visual data most effectively. For example, the human retina; an exquisite sheet of neurobiological wetware, is amongst the most powerful and efficient vision processors known to mankind. With improving integrated technologies, this has generated considerable research interest in the microelectronics community in a quest to develop effective, efficient and robust vision processing hardware with real-time capability. This thesis describes the design of a novel biologically-inspired hybrid analogue/digital vision chip ORASIS1 for centroiding, sizing and counting of enclosed objects. This chip is the first two-dimensional silicon retina capable of centroiding and sizing multiple objects2 in true parallel fashion. Based on a novel distributed architecture, this system achieves ultra-fast and ultra-low power operation in comparison to conventional techniques. Although specifically applied to centroid detection, the generalised architecture in fact presents a new biologically-inspired processing paradigm entitled: distributed asynchronous mixed-signal logic processing. This is applicable to vision and sensory processing applications in general that require processing of large numbers of parallel inputs, normally presenting a computational bottleneck. Apart from the distributed architecture, the specific centroiding algorithm and vision chip other original contributions include: an ultra-low power tunable edge-detection circuit, an adjustable threshold local/global smoothing network and an ON/OFF-adaptive spiking photoreceptor circuit. Finally, a concise yet comprehensive overview of photodiode design methodology is provided for standard CMOS technologies. This aims to form a basic reference from an engineering perspective, bridging together theory with measured results. Furthermore, an approximate photodiode expression is presented, aiming to provide vision chip designers with a basic tool for pre-fabrication calculations

A spatial contrast retina with on-chip calibration for neuromorphic spike-based AER vision systems

We present a 32 32 pixels contrast retina microchip that provides its output as an address event representation (AER) stream. Spatial contrast is computed as the ratio between pixel photocurrent and a local average between neighboring pixels obtained with a diffuser network. This current-based computation produces an important amount of mismatch between neighboring pixels, because the currents can be as low as a few pico-amperes. Consequently, a compact calibration circuitry has been included to trimm each pixel. Measurements show a reduction in mismatch standard deviation from 57% to 6.6% (indoor light). The paper describes the design of the pixel with its spatial contrast computation and calibration sections. About one third of pixel area is used for a 5-bit calibration circuit. Area of pixel is 58 m 56 m, while its current consumption is about 20 nA at 1-kHz event rate. Extensive experimental results are provided for a prototype fabricated in a standard 0.35- m CMOS process.Gobierno de España TIC2003-08164-C03-01, TEC2006-11730-C03-01European Union IST-2001-3412

Neuromorphic electronics for real-time biomedical image processing

Published versio

Interfacing of neuromorphic vision, auditory and olfactory sensors with digital neuromorphic circuits

The conventional Von Neumann architecture imposes strict constraints on the development of intelligent adaptive systems. The requirements of substantial computing power to process and analyse complex data make such an approach impractical to be used in implementing smart systems. Neuromorphic engineering has produced promising results in applications such as electronic sensing, networking architectures and complex data processing. This interdisciplinary field takes inspiration from neurobiological architecture and emulates these characteristics using analogue Very Large Scale Integration (VLSI). The unconventional approach of exploiting the non-linear current characteristics of transistors has aided in the development of low-power adaptive systems that can be implemented in intelligent systems. The neuromorphic approach is widely applied in electronic sensing, particularly in vision, auditory, tactile and olfactory sensors. While conventional sensors generate a huge amount of redundant output data, neuromorphic sensors implement the biological concept of spike-based output to generate sparse output data that corresponds to a certain sensing event. The operation principle applied in these sensors supports reduced power consumption with operating efficiency comparable to conventional sensors. Although neuromorphic sensors such as Dynamic Vision Sensor (DVS), Dynamic and Active pixel Vision Sensor (DAVIS) and AEREAR2 are steadily expanding their scope of application in real-world systems, the lack of spike-based data processing algorithms and complex interfacing methods restricts its applications in low-cost standalone autonomous systems. This research addresses the issue of interfacing between neuromorphic sensors and digital neuromorphic circuits. Current interfacing methods of these sensors are dependent on computers for output data processing. This approach restricts the portability of these sensors, limits their application in a standalone system and increases the overall cost of such systems. The proposed methodology simplifies the interfacing of these sensors with digital neuromorphic processors by utilizing AER communication protocols and neuromorphic hardware developed under the Convolution AER Vision Architecture for Real-time (CAVIAR) project. The proposed interface is simulated using a JAVA model that emulates a typical spikebased output of a neuromorphic sensor, in this case an olfactory sensor, and functions that process this data based on supervised learning. The successful implementation of this simulation suggests that the methodology is a practical solution and can be implemented in hardware. The JAVA simulation is compared to a similar model developed in Nengo, a standard large-scale neural simulation tool. The successful completion of this research contributes towards expanding the scope of application of neuromorphic sensors in standalone intelligent systems. The easy interfacing method proposed in this thesis promotes the portability of these sensors by eliminating the dependency on computers for output data processing. The inclusion of neuromorphic Field Programmable Gate Array (FPGA) board allows reconfiguration and deployment of learning algorithms to implement adaptable systems. These low-power systems can be widely applied in biosecurity and environmental monitoring. With this thesis, we suggest directions for future research in neuromorphic standalone systems based on neuromorphic olfaction

A spatial contrast retina with on-chip calibration for neuromorphic spike-based AER vision systems

We present a 32 32 pixels contrast retina microchip that provides its output as an address event representation (AER) stream. Spatial contrast is computed as the ratio between pixel photocurrent and a local average between neighboring pixels obtained with a diffuser network. This current-based computation produces an important amount of mismatch between neighboring pixels, because the currents can be as low as a few pico-amperes. Consequently, a compact calibration circuitry has been included to trimm each pixel. Measurements show a reduction in mismatch standard deviation from 57% to 6.6% (indoor light). The paper describes the design of the pixel with its spatial contrast computation and calibration sections. About one third of pixel area is used for a 5-bit calibration circuit. Area of pixel is 58 m 56 m, while its current consumption is about 20 nA at 1-kHz event rate. Extensive experimental results are provided for a prototype fabricated in a standard 0.35- m CMOS process.This work was supported by Spanish Research Grants TIC2003-08164-C03-01 (SAMANTA), TEC2006-11730-C03-01 (SAMANTA-II), and EU grant IST-2001-34124 (CAVIAR). JCS was supported by the I3P program of the Spanish Research Council. RSG was supported by a national grant from the Spanish Ministry of Education and Science.Peer reviewe

Neuromorphic perception for greenhouse technology using event-based sensors

Event-Based Cameras (EBCs), unlike conventional cameras, feature independent pixels that asynchronously generate outputs upon detecting changes in their field of view. Short calculations are performed on each event to mimic the brain. The output is a sparse sequence of events with high temporal precision. Conventional computer vision algorithms do not leverage these properties. Thus a new paradigm has been devised. While event cameras are very efficient in representing sparse sequences of events with high temporal precision, many approaches are challenged in applications where a large amount of spatially-temporally rich information must be processed in real-time. In reality, most tasks in everyday life take place in complex and uncontrollable environments, which require sophisticated models and intelligent reasoning. Typical hard problems in real-world scenes are detecting various non-uniform objects or navigation in an unknown and complex environment. In addition, colour perception is an essential fundamental property in distinguishing objects in natural scenes. Colour is a new aspect of event-based sensors, which work fundamentally differently from standard cameras, measuring per-pixel brightness changes per colour filter asynchronously rather than measuring “absolute” brightness at a constant rate. This thesis explores neuromorphic event-based processing methods for high-noise and cluttered environments with imbalanced classes. A fully event-driven processing pipeline was developed for agricultural applications to perform fruits detection and classification to unlock the outstanding properties of event cameras. The nature of features in such data was explored, and methods to represent and detect features were demonstrated. A framework for detecting and classifying features was developed and evaluated on the N-MNIST and Dynamic Vision Sensor (DVS) gesture datasets. The same network was evaluated on laboratory recorded and real-world data with various internal variations for fruits detection such as overlap, variation in size and appearance. In addition, a method to handle highly imbalanced data was developed. We examined the characteristics of spatio-temporal patterns for each colour filter to help expand our understanding of this novel data and explored their applications in classification tasks where colours were more relevant features than shapes and appearances. The results presented in this thesis demonstrate the potential and efficacy of event- based systems by demonstrating the applicability of colour event data and the viability of event-driven classification