Aeronautical engineering: A special bibliography with indexes, supplement 82, April 1977

This bibliography lists 311 reports, articles, and other documents introduced into the NASA scientific and technical information system in March 1977

IN-SITU ADDITIVE MANUFACTURING OF METALS FOR EMBEDDING PARTS COMPATIBLE WITH LIQUID METALS TO ENHANCE THERMAL PERFORMANCE OF AVIONICS FOR SPACECRAFT

With advances in micromachinery, the aggregation of sensors, and more powerful microcontroller platforms on satellites, the size of avionics for space missions are getting dramatically smaller with faster processing speeds. This has resulted in greater localized heat generation, requiring more reliable thermal management systems to enhance the thermal performance of the avionics. The emergence of advanced additive manufacturing (AM), such as selective laser melting (SLM) and engineering materials, such as low-melting eutectic liquid metal (LM) alloys and synthetics ceramics offer new opportunities for thermal cooling systems. Therefore, there has been an opportunity for adapting in-situ AM to overcome limitations of traditional manufacturing in thermal application, where improvements can be achieved through reducing thermal contract resistance of multi-layer interfaces. This dissertation investigates adapting in-situ AM technologies to embed LM compatible prefabricated components, such as ceramic tubes, inside of metals without the need for a parting surface, resulting in more intimate contact between the metal and ceramic and a reduction in the interfacial thermal resistance. A focus was placed on using more ubiquitous powder bed AM technologies, where it was determined that the morphology of the prefabricated LM compatible ceramic tubes had to be optimized to prevent collision with the apparatus of powder bed based AM. Furthermore, to enhance the wettability of the ceramic tubes during laser fusion, the surfaces were electroplated, resulting in a 1.72X improvement in heat transfer compared to cold plates packaged by conventional assembly. Additionally, multiple AM technologies synergistically complement with cross platform tools such as magnetohydrodynamic (MHD) to solve the corrosion problem in the use of low melting eutectic alloy in geometrically complex patterns as an active cooling system with no moving parts. The MHD pumping system was designed using FEA and CFD simulations to approximate Maxwell and Navier-Stokes equations, were then validated using experiments with model heat exchanger to determine the tradeoff in performance with conventional pumping systems. The MHD cooling prototype was shown to reach volumetric flow rates of up to 650 mm3/sec and generated flow pressure due to Lorentz forces of up to 230 Pa, resulting in heat transfer improvement relative to passive prototype of 1.054

A decision support system for the selection of green roof for residential buildings

Green roofs have been installed as a sustainable approach for many years all around the world. There are myriad benefits for green roof installation in terms of private and public sectors such as energy saving, stormwater management, and carbon reduction. Furthermore, there are three types of green roofs with different levels of benefits and costs; however, there is lack of model, framework, or decision support system (DSS) to facilitate the process of decision making for selecting the optimum type of green roof. The aim of the research is to develop a DSS to determine the optimum type of green roof. The research was conducted on residential buildings due to the highest percentage of green roof installation among other building categories in Malaysia. Enhanced Fuzzy Delphi Method (EFDM) has been developed for this study as the approach for data collection, while Multi-Criteria Decision Making (MCDM) is adopted in order to develop the DSS. Moreover, Cybernetic Fuzzy Analytic Hierarchy Process (CFAHP) was also developed as the method used in MCDM. EFDM and CFAHP were developed due to the shortcomings of previous methods for the novelty in this research. A database was created for the DSS using EFDM, while CFAHP method was used for developing the DSS. Additionally, in terms of DSS evaluation, hypothetical examples were defined and after obtaining the results, multiple criteria approach was conducted to understand its level of effectiveness and efficiency. DSS evaluation has been conducted involving experts in the field of green roof. Finally, it was concluded that the DSS works well and can be utilized in construction industry in the design phase. The experts’ feedbacks showed that the developed DSS is effective and efficient, and were satisfied with the performance of the DSS

Integrated helicopter survivability

A high level of survivability is important to protect military personnel and equipment and is central to UK defence policy. Integrated Survivability is the systems engineering methodology to achieve optimum survivability at an affordable cost, enabling a mission to be completed successfully in the face of a hostile environment. “Integrated Helicopter Survivability” is an emerging discipline that is applying this systems engineering approach within the helicopter domain. Philosophically the overall survivability objective is ‘zero attrition’, even though this is unobtainable in practice. The research question was: “How can helicopter survivability be assessed in an integrated way so that the best possible level of survivability can be achieved within the constraints and how will the associated methods support the acquisition process?” The research found that principles from safety management could be applied to the survivability problem, in particular reducing survivability risk to as low as reasonably practicable (ALARP). A survivability assessment process was developed to support this approach and was linked into the military helicopter life cycle. This process positioned the survivability assessment methods and associated input data derivation activities. The system influence diagram method was effective at defining the problem and capturing the wider survivability interactions, including those with the defence lines of development (DLOD). Influence diagrams and Quality Function Deployment (QFD) methods were effective visual tools to elicit stakeholder requirements and improve communication across organisational and domain boundaries. The semi-quantitative nature of the QFD method leads to numbers that are not real. These results are suitable for helping to prioritise requirements early in the helicopter life cycle, but they cannot provide the quantifiable estimate of risk needed to demonstrate ALARP. The probabilistic approach implemented within the Integrated Survivability Assessment Model (ISAM) was developed to provide a quantitative estimate of ‘risk’ to support the approach of reducing survivability risks to ALARP. Limitations in available input data for the rate of encountering threats leads to a probability of survival that is not a real number that can be used to assess actual loss rates. However, the method does support an assessment across platform options, provided that the ‘test environment’ remains consistent throughout the assessment. The survivability assessment process and ISAM have been applied to an acquisition programme, where they have been tested to support the survivability decision making and design process. The survivability ‘test environment’ is an essential element of the survivability assessment process and is required by integrated survivability tools such as ISAM. This test environment, comprising of threatening situations that span the complete spectrum of helicopter operations requires further development. The ‘test environment’ would be used throughout the helicopter life cycle from selection of design concepts through to test and evaluation of delivered solutions. It would be updated as part of the through life capability management (TLCM) process. A framework of survivability analysis tools requires development that can provide probabilistic input data into ISAM and allow derivation of confidence limits. This systems level framework would be capable of informing more detailed survivability design work later in the life cycle and could be enabled through a MATLAB® based approach. Survivability is an emerging system property that influences the whole system capability. There is a need for holistic capability level analysis tools that quantify survivability along with other influencing capabilities such as: mobility (payload / range), lethality, situational awareness, sustainability and other mission capabilities. It is recommended that an investigation of capability level analysis methods across defence should be undertaken to ensure a coherent and compliant approach to systems engineering that adopts best practice from across the domains. Systems dynamics techniques should be considered for further use by Dstl and the wider MOD, particularly within the survivability and operational analysis domains. This would improve understanding of the problem space, promote a more holistic approach and enable a better balance of capability, within which survivability is one essential element. There would be value in considering accidental losses within a more comprehensive ‘survivability’ analysis. This approach would enable a better balance to be struck between safety and survivability risk mitigations and would lead to an improved, more integrated overall design

Knowledge-based Modelling of Additive Manufacturing for Sustainability Performance Analysis and Decision Making

Additiivista valmistusta on pidetty käyttökelpoisena monimutkaisissa geometrioissa, topologisesti optimoiduissa kappaleissa ja kappaleissa joita on muuten vaikea valmistaa perinteisillä valmistusprosesseilla. Eduista huolimatta, yksi additiivisen valmistuksen vallitsevista haasteista on ollut heikko kyky tuottaa toimivia osia kilpailukykyisillä tuotantomäärillä perinteisen valmistuksen kanssa. Mallintaminen ja simulointi ovat tehokkaita työkaluja, jotka voivat auttaa lyhentämään suunnittelun, rakentamisen ja testauksen sykliä mahdollistamalla erilaisten tuotesuunnitelmien ja prosessiskenaarioiden nopean analyysin. Perinteisten ja edistyneiden valmistusteknologioiden mahdollisuudet ja rajoitukset määrittelevät kuitenkin rajat uusille tuotekehityksille. Siksi on tärkeää, että suunnittelijoilla on käytettävissään menetelmät ja työkalut, joiden avulla he voivat mallintaa ja simuloida tuotteen suorituskykyä ja siihen liittyvän valmistusprosessin suorituskykyä, toimivien korkea arvoisten tuotteiden toteuttamiseksi. Motivaation tämän väitöstutkimuksen tekemiselle on, meneillään oleva kehitystyö uudenlaisen korkean lämpötilan suprajohtavan (high temperature superconducting (HTS)) magneettikokoonpanon kehittämisessä, joka toimii kryogeenisissä lämpötiloissa. Sen monimutkaisuus edellyttää monitieteisen asiantuntemuksen lähentymistä suunnittelun ja prototyyppien valmistuksen aikana. Tutkimus hyödyntää tietopohjaista mallinnusta valmistusprosessin analysoinnin ja päätöksenteon apuna HTS-magneettien mekaanisten komponenttien suunnittelussa. Tämän lisäksi, tutkimus etsii mahdollisuuksia additiivisen valmistuksen toteutettavuuteen HTS-magneettikokoonpanon tuotannossa. Kehitetty lähestymistapa käyttää fysikaalisiin kokeisiin perustuvaa tuote-prosessi-integroitua mallinnusta tuottamaan kvantitatiivista ja laadullista tietoa, joka määrittelee prosessi-rakenne-ominaisuus-suorituskyky-vuorovaikutuksia tietyille materiaali-prosessi-yhdistelmille. Tuloksina saadut vuorovaikutukset integroidaan kaaviopohjaiseen malliin, joka voi auttaa suunnittelutilan tutkimisessa ja täten auttaa varhaisessa suunnittelu- ja valmistuspäätöksenteossa. Tätä varten testikomponentit valmistetaan käyttämällä kahta metallin additiivista valmistus prosessia: lankakaarihitsaus additiivista valmistusta (wire arc additive manufacturing) ja selektiivistä lasersulatusta (selective laser melting). Rakenteellisissa sovelluksissa yleisesti käytetyistä metalliseoksista (ruostumaton teräs, pehmeä teräs, luja niukkaseosteinen teräs, alumiini ja kupariseokset) testataan niiden mekaaniset, lämpö- ja sähköiset ominaisuudet. Lisäksi tehdään metalliseosten mikrorakenteen karakterisointi, jotta voidaan ymmärtää paremmin valmistusprosessin parametrien vaikutusta materiaalin ominaisuuksiin. Integroitu mallinnustapa yhdistää kerätyn kokeellisen tiedon, olemassa olevat analyyttiset ja empiiriset vuorovaikutus suhteet, sekä muut tietopohjaiset mallit (esim. elementtimallit, koneoppimismallit) päätöksenteon tukijärjestelmän muodossa, joka mahdollistaa optimaalisen materiaalin, valmistustekniikan, prosessiparametrien ja muitten ohjausmuuttujien valinnan, lopullisen 3d-tulosteun komponentin halutun rakenteen, ominaisuuksien ja suorituskyvyn saavuttamiseksi. Valmistuspäätöksenteko tapahtuu todennäköisyysmallin, eli Bayesin verkkomallin toteuttamisen kautta, joka on vankka, modulaarinen ja sovellettavissa muihin valmistusjärjestelmiin ja tuotesuunnitelmiin. Väitöstyössä esitetyn mallin kyky parantaa additiivisien valmistusprosessien suorituskykyä ja laatua, täten edistää kestävän tuotannon tavoitteita.Additive manufacturing (AM) has been considered viable for complex geometries, topology optimized parts, and parts that are otherwise difficult to produce using conventional manufacturing processes. Despite the advantages, one of the prevalent challenges in AM has been the poor capability of producing functional parts at production volumes that are competitive with traditional manufacturing. Modelling and simulation are powerful tools that can help shorten the design-build-test cycle by enabling rapid analysis of various product designs and process scenarios. Nevertheless, the capabilities and limitations of traditional and advanced manufacturing technologies do define the bounds for new product development. Thus, it is important that the designers have access to methods and tools that enable them to model and simulate product performance and associated manufacturing process performance to realize functional high value products. The motivation for this dissertation research stems from ongoing development of a novel high temperature superconducting (HTS) magnet assembly, which operates in cryogenic environment. Its complexity requires the convergence of multidisciplinary expertise during design and prototyping. The research applies knowledge-based modelling to aid manufacturing process analysis and decision making in the design of mechanical components of the HTS magnet. Further, it explores the feasibility of using AM in the production of the HTS magnet assembly. The developed approach uses product-process integrated modelling based on physical experiments to generate quantitative and qualitative information that define process-structure-property-performance interactions for given material-process combinations. The resulting interactions are then integrated into a graph-based model that can aid in design space exploration to assist early design and manufacturing decision-making. To do so, test components are fabricated using two metal AM processes: wire and arc additive manufacturing and selective laser melting. Metal alloys (stainless steel, mild steel, high-strength low-alloyed steel, aluminium, and copper alloys) commonly used in structural applications are tested for their mechanical-, thermal-, and electrical properties. In addition, microstructural characterization of the alloys is performed to further understand the impact of manufacturing process parameters on material properties. The integrated modelling approach combines the collected experimental data, existing analytical and empirical relationships, and other data-driven models (e.g., finite element models, machine learning models) in the form of a decision support system that enables optimal selection of material, manufacturing technology, process parameters, and other control variables for attaining desired structure, property, and performance characteristics of the final printed component. The manufacturing decision making is performed through implementation of a probabilistic model i.e., a Bayesian network model, which is robust, modular, and can be adapted for other manufacturing systems and product designs. The ability of the model to improve throughput and quality of additive manufacturing processes will boost sustainable manufacturing goals

The Latest Scientific Problems Related to the Implementation and Diagnostics of Construction Objects

This book contains publications related to the special topic entitled: "The Latest Scientific Problems Related to the Implementation and Diagnostics of Construction Objects". Construction is a sector of the economy that is characterized by a very high variability of execution conditions and a large variety of building structures. In a period of very rapid economic development, this high variability and diversity generates many new scientific problems that must be solved in order to further improve the quality of production, as well as to reduce the cost and time of construction. The purpose of the issue is to present and discuss the results of the latest research in the broad field of construction engineering, particularly concerning: modification of the composition of construction materials using various micro- and nanomaterials, by-products or wastes; modern methods of controlling construction processes; methods of planning and effective management in construction, as well as methods of diagnosing construction objects. The articles published in this issue deal with theoretical, experimental, applied and modeling research conducted worldwide in the above-mentioned scientific areas

Operations Management

Global competition has caused fundamental changes in the competitive environment of the manufacturing and service industries. Firms should develop strategic objectives that, upon achievement, result in a competitive advantage in the market place. The forces of globalization on one hand and rapidly growing marketing opportunities overseas, especially in emerging economies on the other, have led to the expansion of operations on a global scale. The book aims to cover the main topics characterizing operations management including both strategic issues and practical applications. A global environmental business including both manufacturing and services is analyzed. The book contains original research and application chapters from different perspectives. It is enriched through the analyses of case studies

Solar Power System Plaing & Design

Photovoltaic (PV) and concentrated solar power (CSP) systems for the conversion of solar energy into electricity are technologically robust, scalable, and geographically dispersed, and they possess enormous potential as sustainable energy sources. Systematic planning and design considering various factors and constraints are necessary for the successful deployment of PV and CSP systems. This book on solar power system planning and design includes 14 publications from esteemed research groups worldwide. The research and review papers in this Special Issue fall within the following broad categories: resource assessments, site evaluations, system design, performance assessments, and feasibility studies

Energy Efficiency in Buildings: Both New and Rehabilitated

Buildings are one of the main causes of the emission of greenhouse gases in the world. Europe alone is responsible for more than 30% of emissions, or about 900 million tons of CO2 per year. Heating and air conditioning are the main cause of greenhouse gas emissions in buildings. Most buildings currently in use were built with poor energy efficiency criteria or, depending on the country and the date of construction, none at all. Therefore, regardless of whether construction regulations are becoming stricter, the real challenge nowadays is the energy rehabilitation of existing buildings. It is currently a priority to reduce (or, ideally, eliminate) the waste of energy in buildings and, at the same time, supply the necessary energy through renewable sources. The first can be achieved by improving the architectural design, construction methods, and materials used, as well as the efficiency of the facilities and systems; the second can be achieved through the integration of renewable energy (wind, solar, geothermal, etc.) in buildings. In any case, regardless of whether the energy used is renewable or not, the efficiency must always be taken into account. The most profitable and clean energy is that which is not consumed