Optimal soft-decoding combined trellis-coded quantization/modulation.

Chei Kwok-hung.Thesis (M.Phil.)--Chinese University of Hong Kong, 2000.Includes bibliographical references (leaves 66-73).Abstracts in English and Chinese.Chapter Chapter 1 --- Introduction --- p.1Chapter 1.1 --- Typical Digital Communication Systems --- p.2Chapter 1.1.1 --- Source coding --- p.3Chapter 1.1.2 --- Channel coding --- p.5Chapter 1.2 --- Joint Source-Channel Coding System --- p.5Chapter 1.3 --- Thesis Organization --- p.7Chapter Chapter 2 --- Trellis Coding --- p.9Chapter 2.1 --- Convolutional Codes --- p.9Chapter 2.2 --- Trellis-Coded Modulation --- p.12Chapter 2.2.1 --- Set Partitioning --- p.13Chapter 2.3 --- Trellis-Coded Quantization --- p.14Chapter 2.4 --- Joint TCQ/TCM System --- p.17Chapter 2.4.1 --- The Combined Receiver --- p.17Chapter 2.4.2 --- Viterbi Decoding --- p.19Chapter 2.4.3 --- Sequence MAP Decoding --- p.20Chapter 2.4.4 --- Sliding Window Decoding --- p.21Chapter 2.4.5 --- Block-Based Decoding --- p.23Chapter Chapter 3 --- Soft Decoding Joint TCQ/TCM over AWGN Channel --- p.25Chapter 3.1 --- System Model --- p.26Chapter 3.2 --- TCQ with Optimal Soft-Decoder --- p.27Chapter 3.3 --- Gaussian Memoryless Source --- p.30Chapter 3.3.1 --- Theorem Limit --- p.31Chapter 3.3.2 --- Performance on PAM Constellations --- p.32Chapter 3.3.3 --- Performance on PSK Constellations --- p.36Chapter 3.4 --- Uniform Memoryless Source --- p.38Chapter 3.4.1 --- Theorem Limit --- p.38Chapter 3.4.2 --- Performance on PAM Constellations --- p.39Chapter 3.4.3 --- Performance on PSK Constellations --- p.40Chapter Chapter 4 --- Soft Decoding Joint TCQ/TCM System over Rayleigh Fading Channel --- p.42Chapter 4.1 --- Wireless Channel --- p.43Chapter 4.2 --- Rayleigh Fading Channel --- p.44Chapter 4.3 --- Idea Interleaving --- p.45Chapter 4.4 --- Receiver Structure --- p.46Chapter 4.5 --- Numerical Results --- p.47Chapter 4.5.1 --- Performance on 4-PAM Constellations --- p.48Chapter 4.5.2 --- Performance on 8-PAM Constellations --- p.50Chapter 4.5.3 --- Performance on 16-PAM Constellations --- p.52Chapter Chapter 5 --- Joint TCVQ/TCM System --- p.54Chapter 5.1 --- Trellis-Coded Vector Quantization --- p.55Chapter 5.1.1 --- Set Partitioning in TCVQ --- p.56Chapter 5.2 --- Joint TCVQ/TCM --- p.59Chapter 5.2.1 --- Set Partitioning and Index Assignments --- p.60Chapter 5.2.2 --- Gaussian-Markov Sources --- p.61Chapter 5.3 --- Simulation Results and Discussion --- p.62Chapter Chapter 6 --- Conclusion and Future Work --- p.64Chapter 6.1 --- Conclusion --- p.64Chapter 6.2 --- Future Works --- p.65Bibliography --- p.66Appendix-Publications --- p.7

On implementation aspects of decode and forward and compress and forward relay protocols

In this work, the common relay protocols Decode-and-Forward and Compress-and-Forward (CF) are investigated from a practical point of view: This involves on the one hand the impact of imperfections like channel and carrier phase stimation errors and on the other hand, the question of how to implement relay protocol specific signal processing like quantization for CF which is modeled in information theory simply by additive quantizer noise. To evaluate the performance, achievable rates are determined either numerically with the help of the Max-Flow Min-Cut theorem or by link level simulations.Diese Arbeit untersucht die Relay-Protokolle Decode-and-Forward und Compress-and-Forward (CF) mit dem Fokus auf einer praktischen Umsetzung. Es werden sowohl Störeinflüsse wie Kanal- und Phasenschätzfehler betrachtet als auch spezielle Kompressionsverfahren für das CF Protokoll implementiert. Von großer Bedeutung ist hier die Kompression in Form der Quantisierung, weil diese in der Informationstheorie lediglich durch Quantisierungsrauschen modelliert wird. Zur Auswertung der Leistungsfähigkeit der Protokolle werden die erzielbaren Raten entweder numerisch oder durch Simulation bestimmt

On distributed coding, quantization of channel measurements and faster-than-Nyquist signaling

This dissertation considers three different aspects of modern digital communication systems and is therefore divided in three parts. The first part is distributed coding. This part deals with source and source- channel code design issues for digital communication systems with many transmitters and one receiver or with one transmitter and one receiver but with side information at the receiver, which is not available at the transmitter. Such problems are attracting attention lately, as they constitute a way of extending the classical point-to-point communication theory to networks. In this first part of this dissertation, novel source and source-channel codes are designed by converting each of the considered distributed coding problems into an equivalent classical channel coding or classical source-channel coding problem. The proposed schemes come very close to the theoretical limits and thus, are able to exhibit some of the gains predicted by network information theory. In the other two parts of this dissertation classical point-to-point digital com- munication systems are considered. The second part is quantization of coded chan- nel measurements at the receiver. Quantization is a way to limit the accuracy of continuous-valued measurements so that they can be processed in the digital domain. Depending on the desired type of processing of the quantized data, different quantizer design criteria should be used. In this second part of this dissertation, the quantized received values from the channel are processed by the receiver, which tries to recover the transmitted information. An exhaustive comparison of several quantization cri- teria for this case are studied providing illuminating insight for this quantizer design problem. The third part of this dissertation is faster-than-Nyquist signaling. The Nyquist rate in classical point-to-point bandwidth-limited digital communication systems is considered as the maximum transmission rate or signaling rate and is equal to twice the bandwidth of the channel. In this last part of the dissertation, we question this Nyquist rate limitation by transmitting at higher signaling rates through the same bandwidth. By mitigating the incurred interference due to the faster-than-Nyquist rates, gains over Nyquist rate systems are obtained

The Telecommunications and Data Acquisition Report

This quarterly publication provides archival reports on developments in programs managed by JPL's Telecommunications and Mission Operations Directorate (TMOD), which now includes the former Telecommunications and Data Acquisition (TDA) Office. In space communications, radio navigation, radio science, and ground-based radio and radar astronomy, it reports on activities of the Deep Space Network (DSN) in planning, supporting research and technology, implementation, and operations. Also included are standards activity at JPL for space data and information systems and reimbursable DSN work performed for other space agencies through NASA. The preceding work is all performed for NASA's Office of Space Communications (OSC). TMOD also performs work funded by other NASA program offices through and with the cooperation of OSC. The first of these is the Orbital Debris Radar Program funded by the Office of Space Systems Development. It exists at Goldstone only and makes use of the planetary radar capability when the antennas are configured as science instruments making direct observations of the planets, their satellites, and asteroids of our solar system. The Office of Space Sciences funds the data reduction and science analyses of data obtained by the Goldstone Solar System Radar. The antennas at all three complexes are also configured for radio astronomy research and, as such, conduct experiments funded by the National Science Foundation in the U.S. and other agencies at the overseas complexes. These experiments are either in microwave spectroscopy or very long baseline interferometry. Finally, tasks funded under the JPL Director's Discretionary Fund and the Caltech President's Fund that involve TMOD are included. This and each succeeding issue of 'The Telecommunications and Data Acquisition Progress Report' will present material in some, but not necessarily all, of the aforementioned programs

Advanced wireless communications using large numbers of transmit antennas and receive nodes

The concept of deploying a large number of antennas at the base station, often called massive multiple-input multiple-output (MIMO), has drawn considerable interest because of its potential ability to revolutionize current wireless communication systems. Most literature on massive MIMO systems assumes time division duplexing (TDD), although frequency division duplexing (FDD) dominates current cellular systems. Due to the large number of transmit antennas at the base station, currently standardized approaches would require a large percentage of the precious downlink and uplink resources in FDD massive MIMO be used for training signal transmissions and channel state information (CSI) feedback. First, we propose practical open-loop and closed-loop training frameworks to reduce the overhead of the downlink training phase. We then discuss efficient CSI quantization techniques using a trellis search. The proposed CSI quantization techniques can be implemented with a complexity that only grows linearly with the number of transmit antennas while the performance is close to the optimal case. We also analyze distributed reception using a large number of geographically separated nodes, a scenario that may become popular with the emergence of the Internet of Things. For distributed reception, we first propose coded distributed diversity to minimize the symbol error probability at the fusion center when the transmitter is equipped with a single antenna. Then we develop efficient receivers at the fusion center using minimal processing overhead at the receive nodes when the transmitter with multiple transmit antennas sends multiple symbols simultaneously using spatial multiplexing

Adaptive Bit Allocation With Reduced Feedback for Wireless Multicarrier Transceivers

With the increasing demand in the wireless mobile applications came a growing need to transmit information quickly and accurately, while consuming more and more bandwidth. To address this need, communication engineers started employing multicarrier modulation in their designs, which is suitable for high data rate transmission. Multicarrier modulation reduces the system's susceptibility to the frequency-selective fading channel, by transforming it into a collection of approximately flat subchannels. As a result, this makes it easier to compensate for the distortion introduced by the channel. This thesis concentrates on techniques for saving bandwidth usage when employing adaptive multicarrier modulation, where subcarrier parameters (bit and energy allocations) are modulated based on the channel state information feedback obtained from previous burst. Although bit and energy allocations can substantially increase error robustness and throughput of the system, the feedback information required at both ends of the transceiver can be large. The objective of this work is to compare different feedback compression techniques that could reduce the amount of feedback information required to perform adaptive bit and energy allocation in multicarrier transceivers. This thesis employs an approach for reducing the number of feedback transmissions by exploiting the time-correlation properties of a wireless channel and placing a threshold check on bit error rate (BER) values. Using quantization and source coding techniques, such as Huffman coding, Run length encoding and LZWalgorithms, the amount of feedback information has been compressed. These calculations have been done for different quantization levels to understand the relationship between quantization levels and system performance. These techniques have been applied to both OFDM and MIMO-OFDM systems

Source-channel coding for robust image transmission and for dirty-paper coding

In this dissertation, we studied two seemingly uncorrelated, but conceptually related problems in terms of source-channel coding: 1) wireless image transmission and 2) Costa ("dirty-paper") code design. In the first part of the dissertation, we consider progressive image transmission over a wireless system employing space-time coded OFDM. The space-time coded OFDM system based on a newly built broadband MIMO fading model is theoretically evaluated by assuming perfect channel state information (CSI) at the receiver for coherent detection. Then an adaptive modulation scheme is proposed to pick the constellation size that offers the best reconstructed image quality for each average signal-to-noise ratio (SNR). A more practical scenario is also considered without the assumption of perfect CSI. We employ low-complexity decision-feedback decoding for differentially space- time coded OFDM systems to exploit transmitter diversity. For JSCC, we adopt a product channel code structure that is proven to provide powerful error protection and bursty error correction. To further improve the system performance, we also apply the powerful iterative (turbo) coding techniques and propose the iterative decoding of differentially space-time coded multiple descriptions of images. The second part of the dissertation deals with practical dirty-paper code designs. We first invoke an information-theoretical interpretation of algebraic binning and motivate the code design guidelines in terms of source-channel coding. Then two dirty-paper code designs are proposed. The first is a nested turbo construction based on soft-output trellis-coded quantization (SOTCQ) for source coding and turbo trellis- coded modulation (TTCM) for channel coding. A novel procedure is devised to balance the dimensionalities of the equivalent lattice codes corresponding to SOTCQ and TTCM. The second dirty-paper code design employs TCQ and IRA codes for near-capacity performance. This is done by synergistically combining TCQ with IRA codes so that they work together as well as they do individually. Our TCQ/IRA design approaches the dirty-paper capacity limit at the low rate regime (e.g., < 1:0 bit/sample), while our nested SOTCQ/TTCM scheme provides the best performs so far at medium-to-high rates (e.g., >= 1:0 bit/sample). Thus the two proposed practical code designs are complementary to each other

Study of efficient transmission and reception of image-type data using millimeter waves

Evaluation of signal processing and modulation techniques for transmission and reception of image type data via millimeter wave relay satellite

MIMO Systems

In recent years, it was realized that the MIMO communication systems seems to be inevitable in accelerated evolution of high data rates applications due to their potential to dramatically increase the spectral efficiency and simultaneously sending individual information to the corresponding users in wireless systems. This book, intends to provide highlights of the current research topics in the field of MIMO system, to offer a snapshot of the recent advances and major issues faced today by the researchers in the MIMO related areas. The book is written by specialists working in universities and research centers all over the world to cover the fundamental principles and main advanced topics on high data rates wireless communications systems over MIMO channels. Moreover, the book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity