Structure-specified H∞ loop shaping control for balancing of bicycle robots: A particle swarm optimization approach

In this paper, the particle swarm optimization (PSO) algorithm was used to design the structure-specified H∞ loop shaping controllers for balancing of bicycle robots. The structure-specified H∞ loop shaping controller design normally leads to a complex optimization problem. PSO is an efficient meta-heuristic search which is used to solve multi-objectives and non-convex optimizations. A model-based systematic procedure for designing the particle swarm optimization-based structure-specified H∞ loop shaping controllers was proposed in this research. The structure of the obtained controllers are therefore simpler. The simulation and experimental results showed that the robustness and efficiency of the proposed controllers was gained when compared with the proportional plus derivative (PD) as well as conventional H∞ loop shaping controller. The simulation results also showed a better efficiency of the developed control algorithm compared to the Genetic Algorithm based one

Optimization and analysis of the current control loop of VSCs connected to uncertain grids through LCL filters

Premio Extraordinario de Doctorado 2011This thesis focuses on the design and analysis of the control of voltage source converters connected to the grid through LCL filters. Particularly it is centered on grids presenting uncertainty in their intrinsic dynamic parameters and their influence over the inner control loop of a grid converter: the current control. To that end, the thesis follows a three-fold discussion. Firstly, the thesis studies the grid model, its uncertain parameters and presents a proposal to recursively estimate them. The estimation is based on a recursive least-squares optimization procedure applied to the current and voltage measurements, performed in the point of common coupling, expressed in a synchronous reference frame. The synchronization and the reference frame transformation process is specially designed for the proposed system. The optimization process is complemented with an estimation evaluation block that gives a real-time measure of the estimation quality. The influence of those uncertain parameters over the stability of the current control loop of grid converters is the second topic of this thesis. For the case of linear controllers, the analysis is performed by applying the structured singular value mu theory to a parametric uncertainty model that is described in the document. The proposed method extracts safe grid parameters ranges from a previously defined controller and plant model. Special attention is payed to important practical considerations as pure real uncertainty and sampled-data systems analysis. To test the method performance and illustrate its behavior, this dissertation discusses the robustness of three particular examples: a SISO control approach, a MIMO servo-controller approach and a robust H_inf design. For the case of non-linear controllers, the thesis focuses on hysteresis controllers and presents some practical conclusions. After that analysis, the thesis deals with the complementary problem: the design of a robust controller for grid converters connected through LCL filters to grids whose parameters range between known values. As a prior stage, the thesis presents an LQ servo-controller design procedure that may be complemented with the use of state estimators. The control is faced in a synchronous reference frame and directly controls the grid injected current. Once the framework is settled, the thesis proposes a design technique based on a robust Loop-shaping H_inf design procedure complemented with the nu-gap analysis tool. The final part of this dissertation describes the experimental set-up used for testing the presented proposals. After this, a summary of experimental results and waveforms is presented

Output Consensus Control for Heterogeneous Multi-Agent Systems

We study distributed output feedback control of a heterogeneous multi-agent system (MAS), consisting of N different continuous-time linear dynamical systems. For achieving output consensus, a virtual reference model is assumed to generate the desired trajectory for which the MAS is required to track and synchronize. A full information (FI) protocol is assumed for consensus control. This protocol includes information exchange with the feed-forward signals. In this dissertation we study two different kinds of consensus problems. First, we study the consensus control over the topology involving time delays and prove that consensus is independent of delay lengths. Second, we study the consensus under communication constraints. In contrast to the existing work, the reference trajectory is transmitted to only one or a few agents and no local reference models are employed in the feedback controllers thereby eliminating synchronization of the local reference models. Both significantly lower the communication overhead. In addition, our study is focused on the case when the available output measurements contain only relative information from the neighboring agents and reference signal. Conditions are derived for the existence of distributed output feedback control protocols, and solutions are proposed to synthesize the stabilizing and consensus control protocol over a given connected digraph. It is shown that the H-inf loop shaping and LQG/LTR techniques from robust control can be directly applied to design the consensus output feedback control protocol. The results in this dissertation complement the existing ones, and are illustrated by a numerical example. The MAS approach developed in this dissertation is then applied to the development of autonomous aircraft traffic control system. The development of such systems have already started to replace the current clearance-based operations to trajectory based operations. Such systems will help to reduce human errors, increase efficiency, provide safe flight path, and improve the performance of the future flight

Localization in GPS denied environment

No abstract available

Optimal Control and Synchronization of Dynamic Ensemble Systems

Ensemble control involves the manipulation of an uncountably infinite collection of structurally identical or similar dynamical systems, which are indexed by a parameter set, by applying a common control without using feedback. This subject is motivated by compelling problems in quantum control, sensorless robotic manipulation, and neural engineering, which involve ensembles of linear, bilinear, or nonlinear oscillating systems, for which analytical control laws are infeasible or absent. The focus of this dissertation is on novel analytical paradigms and constructive control design methods for practical ensemble control problems. The first result is a computational method %based on the singular value decomposition (SVD) for the synthesis of minimum-norm ensemble controls for time-varying linear systems. This method is extended to iterative techniques to accommodate bounds on the control amplitude, and to synthesize ensemble controls for bilinear systems. Example ensemble systems include harmonic oscillators, quantum transport, and quantum spin transfers on the Bloch system. To move towards the control of complex ensembles of nonlinear oscillators, which occur in neuroscience, circadian biology, electrochemistry, and many other fields, ideas from synchronization engineering are incorporated. The focus is placed on the phenomenon of entrainment, which refers to the dynamic synchronization of an oscillating system to a periodic input. Phase coordinate transformation, formal averaging, and the calculus of variations are used to derive minimum energy and minimum mean time controls that entrain ensembles of non-interacting oscillators to a harmonic or subharmonic target frequency. In addition, a novel technique for taking advantage of nonlinearity and heterogeneity to establish desired dynamical structures in collections of inhomogeneous rhythmic systems is derived

Adaptive Systems: History, Techniques, Problems, and Perspectives

We survey some of the rich history of control over the past century with a focus on the major milestones in adaptive systems. We review classic methods and examples in adaptive linear systems for both control and observation/identification. The focus is on linear plants to facilitate understanding, but we also provide the tools necessary for many classes of nonlinear systems. We discuss practical issues encountered in making these systems stable and robust with respect to additive and multiplicative uncertainties. We discuss various perspectives on adaptive systems and their role in various fields. Finally, we present some of the ongoing research and expose problems in the field of adaptive control

Fault-tolerant Stochastic Distributed Systems

The present doctoral thesis discusses the design of fault-tolerant distributed systems, placing emphasis in addressing the case where the actions of the nodes or their interactions are stochastic. The main objective is to detect and identify faults to improve the resilience of distributed systems to crash-type faults, as well as detecting the presence of malicious nodes in pursuit of exploiting the network. The proposed analysis considers malicious agents and computational solutions to detect faults. Crash-type faults, where the affected component ceases to perform its task, are tackled in this thesis by introducing stochastic decisions in deterministic distributed algorithms. Prime importance is placed on providing guarantees and rates of convergence for the steady-state solution. The scenarios of a social network (state-dependent example) and consensus (time- dependent example) are addressed, proving convergence. The proposed algorithms are capable of dealing with packet drops, delays, medium access competition, and, in particular, nodes failing and/or losing network connectivity. The concept of Set-Valued Observers (SVOs) is used as a tool to detect faults in a worst-case scenario, i.e., when a malicious agent can select the most unfavorable sequence of communi- cations and inject a signal of arbitrary magnitude. For other types of faults, it is introduced the concept of Stochastic Set-Valued Observers (SSVOs) which produce a confidence set where the state is known to belong with at least a pre-specified probability. It is shown how, for an algorithm of consensus, it is possible to exploit the structure of the problem to reduce the computational complexity of the solution. The main result allows discarding interactions in the model that do not contribute to the produced estimates. The main drawback of using classical SVOs for fault detection is their computational burden. By resorting to a left-coprime factorization for Linear Parameter-Varying (LPV) systems, it is shown how to reduce the computational complexity. By appropriately selecting the factorization, it is possible to consider detectable systems (i.e., unobservable systems where the unobservable component is stable). Such a result plays a key role in the domain of Cyber-Physical Systems (CPSs). These techniques are complemented with Event- and Self-triggered sampling strategies that enable fewer sensor updates. Moreover, the same triggering mechanisms can be used to make decisions of when to run the SVO routine or resort to over-approximations that temporarily compromise accuracy to gain in performance but maintaining the convergence characteristics of the set-valued estimates. A less stringent requirement for network resources that is vital to guarantee the applicability of SVO-based fault detection in the domain of Networked Control Systems (NCSs)

Time-Delay Systems

Time delay is very often encountered in various technical systems, such as electric, pneumatic and hydraulic networks, chemical processes, long transmission lines, robotics, etc. The existence of pure time lag, regardless if it is present in the control or/and the state, may cause undesirable system transient response, or even instability. Consequently, the problem of controllability, observability, robustness, optimization, adaptive control, pole placement and particularly stability and robustness stabilization for this class of systems, has been one of the main interests for many scientists and researchers during the last five decades