Hybrid DDS-PLL based reconfigurable oscillators with high spectral purity for cognitive radio

Analytical, design and simulation studies on the performance optimization of reconfigurable architecture of a Hybrid DDS – PLL are presented in this thesis. The original contributions of this thesis are aimed towards the DDS, the dithering (spur suppression) scheme and the PLL. A new design of Taylor series-based DDS that reduces the dynamic power and number of multipliers is a significant contribution of this thesis. This thesis compares dynamic power and SFDR achieved in the design of varieties of DDS such as Quartic, Cubic, Linear and LHSC. This thesis proposes two novel schemes namely “Hartley Image Suppression” and “Adaptive Sinusoidal Interference Cancellation” overcoming the low noise floor of traditional dithering schemes. The simulation studies on a Taylor series-based DDS reveal an improvement in SFDR from 74 dB to 114 dB by using Least Mean Squares -Sinusoidal Interference Canceller (LM-SIC) with the noise floor maintained at -200 dB. Analytical formulations have been developed for a second order PLL to relate the phase noise to settling time and Phase Margin (PM) as well as to relate jitter variance and PM. New expressions relating phase noise to PM and lock time to PM are derived. This thesis derives the analytical relationship between the roots of the characteristic equation of a third order PLL and its performance metrics like PM, Gardner’s stability factor, jitter variance, spur gain and ratio of noise power to carrier power. This thesis presents an analysis to relate spur gain and capacitance ratio of a third order PLL. This thesis presents an analytical relationship between the lock time and the roots of its characteristic equation of a third order PLL. Through Vieta’s circle and Vieta’s angle, the performance metrics of a third order PLL are related to the real roots of its characteristic equation

Models and Analysis of Vocal Emissions for Biomedical Applications

The International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications (MAVEBA) came into being in 1999 from the particularly felt need of sharing know-how, objectives and results between areas that until then seemed quite distinct such as bioengineering, medicine and singing. MAVEBA deals with all aspects concerning the study of the human voice with applications ranging from the neonate to the adult and elderly. Over the years the initial issues have grown and spread also in other aspects of research such as occupational voice disorders, neurology, rehabilitation, image and video analysis. MAVEBA takes place every two years always in Firenze, Italy

Digital Transmitter I/Q Calibration: Algorithms and Real-Time Prototype Implementation

Nowadays, the direct-conversion and the low-IF transceiver principles are seen as the most promising architectures for future flexible radios. Both architectures employ complex I/Q mixing for up- and downconversion. Consequently, the performance of the transceiver architectures can be seriously deteriorated by the phenomenon called I/Q imbalance. I/Q imbalance stems from relative amplitude and phase mismatch between the I- and Q-branches of the transceiver, thus resulting in self-interference or adjacent channel interference. This thesis addresses details of the real-time prototype implementation of the transmitter unit realizing a widely-linear least-squares-based I/Q imbalance estimation algorithm and a corresponding pre-distortion structure as previously proposed by Anttila et al. First transceiver architectures and radio transmitter principles are discussed with special emphasis on I/Q imbalance related aspects. Thereafter, the imbalance estimation principle itself is reviewed and a recursive version of it is derived. Then the implementation platform and software are introduced. After that, implementation details are discussed and implementation-related practical issues are addressed. Finally, simulation results and comprehensive RF measurement results from the real-time prototype implementation are presented. The work done in this thesis realizes a real-time prototype implementation of the WL-LS I/Q imbalance estimation algorithm and corresponding pre-distortion structure. In addition, the implementation is shown to give consistent results with Matlab simulations and it can operate on general purpose processors. /Kir10Nykyaikana suoramuunnos- ja matalavälitaajuuslähetin-vastaanotin periaatteet nähdään lupaavimpina arkkitehtuureina tulevaisuuden joustaville radioille. Molemmat arkkitehtuurit käyttävät taajuusmuunnoksissa kompleksista I/Q taajuus-sekoitusta. Tästä johtuen mainittujen lähetin-vastaanotinarkkitehtuurien suorituskykyä huonontaa ilmiö nimeltä I/Q epätasapaino, mikä johtuu suhteellisesta amplitudi ja vaihe epäsovituksesta modulaattorin I- ja Q-haarojen välillä. Tämän vuoksi signaaliin muodostuu itseishäiriötä tai viereisen kanavan häiriötä heikentäen radiotaajuisen signaalin puhtautta. Tässä diplomityössä esitellään reaaliaikaisen lähetin-vastaanotinprototyypin toteutus, jossa on käytössä Lauri Anttilan aiemmin julkaisema laajasti lineaariseen pienimmän neliösumman menetelmään perustuva I/Q epätasapainon estimointi algoritmi ja siihen liittyvä esivääristysrakenne. Aluksi esitellään lähetin-vastaanotinarkkitehtuurit ja niihin liittyvät pääperiaatteet painottaen I/Q epätasapainoon liittyviä asioita. Tämän jälkeen johdetaan I/Q epätasapainon estimointiin käytettävän algoritmin rekursiivinen versio ja esitellään toteutukseen käytettävä kehitysalusta ohjelmistoineen. Tämän jälkeen käydään läpi toteutuksen yksityiskohdat ja siihen liittyvät käytännön ilmiöt. Lopuksi esitellään simulaatiotulokset ja kokonaisvaltaiset radiotaajuusmittaukset reaali-aikaisesta prototyyppitoteutuksesta. Diplomityöprojektin tuloksena on radiolähettimen reaali-aikainen prototyyppi toteutus, jossa on käytössä laajasti lineaariseen pienimpään neliösummaan perustuva I/Q epäsovituksen estimointi ja vähentämis algoritmi. Implementaatio tuottaa yhdenmukaisia tuloksia Matlab simulaatioiden kanssa ja pystyy toimimaan yleiskäyttöisen suorittimen laskentateholla

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

The Telecommunications and Data Acquisition Report

This quarterly publication provides archival reports on developments in programs in space communications, radio navigation, radio science, and ground-based radio and radar astronomy. It reports on activities of the Deep Space Network (DSN) in planning, supporting research and technology, implementation, and operations. Also included are standardization activities at the Jet Propulsion Laboratory for space data and information systems

Models and analysis of vocal emissions for biomedical applications: 5th International Workshop: December 13-15, 2007, Firenze, Italy

The MAVEBA Workshop proceedings, held on a biannual basis, collect the scientific papers presented both as oral and poster contributions, during the conference. The main subjects are: development of theoretical and mechanical models as an aid to the study of main phonatory dysfunctions, as well as the biomedical engineering methods for the analysis of voice signals and images, as a support to clinical diagnosis and classification of vocal pathologies. The Workshop has the sponsorship of: Ente Cassa Risparmio di Firenze, COST Action 2103, Biomedical Signal Processing and Control Journal (Elsevier Eds.), IEEE Biomedical Engineering Soc. Special Issues of International Journals have been, and will be, published, collecting selected papers from the conference

Strategies for non-uniform rate sampling in digital control theory

This thesis is about digital control theory and presents an account of methods for enabling and analysing intentional non-uniform sampling in discrete compensators. Most conventional control algorithms cause numerical problems where data is collected at sampling rates that are substantially higher than the dynamics of the equivalent continuous-time operation that is being implemented. This is of relevant interest in applications of digital control, in which high sample rates are routinely dictated by the system stability requirements rather than the signal processing needs. Considerable recent progress in reducing the sample frequency requirements has been made through the use of non-uniform sampling schemes, so called alias-free signal processing. The approach prompts the simplification of complex systems and consequently enhances the numerical conditioning of the implementation algorithms that otherwise, would require very high uniform sample rates. Such means of signal representation and analysis presents a variety of options and thus is being researched and practiced in a number of areas in communications. However, the control communities have not yet investigated the use of intentional non-uniform sampling, and hence the ethos of this research project is to investigate the effectiveness of such sampling regimes, in the context of exploiting the benefits. Digital control systems exhibit bandwidth limitations enforced by their closed-loop frequency requirements, the calculation delays in the control algorithm and the interfacing conversion times. These limitations pave the way for additional phase lags within the control loop that demand very high sample rates. Since non-uniform sampling is propitious in reducing the sample frequency requirements of digital processing, it proffers the prospects of being utilised in achieving a higher control bandwidth without opting for very high uniform sample rates. The concept, to the author s knowledge, has not formally been studied and very few definite answers exist in control literature regarding the associated analysis techniques. The key contributions adduced in this thesis include the development and analysis of the control algorithm designed to accommodate intentional non-uniform sample frequencies. In addition, the implementation aspects are presented on an 8-bit microcontroller and an FPGA board. This work begins by establishing a brief historical perspective on the use of non-uniform sampling and its role for digital processing. The study is then applied to the problem of digital control design, and applications are further discoursed. This is followed by consideration of its implementation aspects on standard hardware.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

The Telecommunications and Data Acquisition Report

This quarterly publication (July-Sept. 1986) provides archival reports on developments in programs managed by JPL's Office of Telecommunications and Data Acquisition (TDA). In space communications, radio navigation, radio science, and ground-based radio astronomy, it reports on activities of the Deep Space Network (DSN) and its associated Ground Communications Facility (GCF) in planning, in supporting research and technology, in implementation, and in operations. This work is performed for NASA's Office of Space Tracking and Data Systems (OSTDS). In geodynamics, the publication reports on the application of radio interferometry at microwave frequencies for geodynamic measurements. In the search for extraterrestrial intelligence (SETI), it reports on implementation and operations for searching the microwave spectrum. The latter two programs are performed for NASA's Office of Space Science and Applications (OSSA)