Design of Indoor Positioning Systems Based on Location Fingerprinting Technique

Positioning systems enable location-awareness for mobile computers in ubiquitous and pervasive wireless computing. By utilizing location information, location-aware computers can render location-based services possible for mobile users. Indoor positioning systems based on location fingerprints of wireless local area networks have been suggested as a viable solution where the global positioning system does not work well. Instead of depending on accurate estimations of angle or distance in order to derive the location with geometry, the fingerprinting technique associates location-dependent characteristics such as received signal strength to a location and uses these characteristics to infer the location. The advantage of this technique is that it is simple to deploy with no specialized hardware required at the mobile station except the wireless network interface card. Any existing wireless local area network infrastructure can be reused for this kind of positioning system. While empirical results and performance studies of such positioning systems are presented in the literature, analytical models that can be used as a framework for efficiently designing the positioning systems are not available. This dissertation develops an analytical model as a design tool and recommends a design guideline for such positioning systems in order to expedite the deployment process. A system designer can use this framework to strike a balance between the accuracy, the precision, the location granularity, the number of access points, and the location spacing. A systematic study is used to analyze the location fingerprint and discover its unique properties. The location fingerprint based on the received signal strength is investigated. Both deterministic and probabilistic approaches of location fingerprint representations are considered. The main objectives of this work are to predict the performance of such systems using a suitable model and perform sensitivity analyses that are useful for selecting proper system parameters such as number of access points and minimum spacing between any two different locations

An Indoor Positioning System Based on Wearables for Ambient-Assisted Living

The urban population is growing at such a rate that by 2050 it is estimated that 84% of the world’s population will live in cities, with flats being the most common living place. Moreover, WiFi technology is present in most developed country urban areas, with a quick growth in developing countries. New Ambient-Assisted Living applications will be developed in the near future having user positioning as ground technology: elderly tele-care, energy consumption, security and the like are strongly based on indoor positioning information. We present an indoor positioning system for wearable devices based on WiFi fingerprinting. Smart-watch wearable devices are used to acquire the WiFi strength signals of the surrounding Wireless Access Points used to build an ensemble of Machine Learning classification algorithms. Once built, the ensemble algorithm is used to locate a user based on the WiFi strength signals provided by the wearable device. Experimental results for five different urban flats are reported, showing that the system is robust and reliable enough for locating a user at room level into his/her home. Another interesting characteristic of the presented system is that it does not require deployment of any infrastructure, and it is unobtrusive, the only device required for it to work is a smart-watch.This work has been partially funded by the Spanish Ministry of Economy and Competitiveness through the “Proyectos I + D Excelencia” programme (TIN2015-70202-P) and the “Redes de Excelencia” programme (TEC2015-71426-REDT), and from the Regional Government of Valencia (‘Proyectos de I + D para Grupos de Investigación Emergentes’ GV/2016/159). Special thanks to Víctor, Maricarmen, Inma and Daniel who lent their houses for performing the experiments

Indoor wireless communications and applications

Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter

Doctor of Philosophy

dissertationIn wireless sensor networks, knowing the location of the wireless sensors is critical in many remote sensing and location-based applications, from asset tracking, and structural monitoring to geographical routing. For a majority of these applications, received signal strength (RSS)-based localization algorithms are a cost effective and viable solution. However, RSS measurements vary unpredictably because of fading, the shadowing caused by presence of walls and obstacles in the path, and non-isotropic antenna gain patterns, which affect the performance of the RSS-based localization algorithms. This dissertation aims to provide efficient models for the measured RSS and use the lessons learned from these models to develop and evaluate efficient localization algorithms. The first contribution of this dissertation is to model the correlation in shadowing across link pairs. We propose a non-site specific statistical joint path loss model between a set of static nodes. Radio links that are geographically proximate often experience similar environmental shadowing effects and thus have correlated shadowing. Using a large number of multi-hop network measurements in an ensemble of indoor and outdoor environments, we show statistically significant correlations among shadowing experienced on different links in the network. Finally, we analyze multihop paths in three and four node networks using both correlated and independent shadowing models and show that independent shadowing models can underestimate the probability of route failure by a factor of two or greater. Second, we study a special class of algorithms, called kernel-based localization algorithms, that use kernel methods as a tool for learning correlation between the RSS measurements. Kernel methods simplify RSS-based localization algorithms by providing a means to learn the complicated relationship between RSS measurements and position. We present a common mathematical framework for kernel-based localization algorithms to study and compare the performance of four different kernel-based localization algorithms from the literature. We show via simulations and an extensive measurement data set that kernel-based localization algorithms can perform better than model-based algorithms. Results show that kernel methods can achieve an RMSE up to 55% lower than a model-based algorithm. Finally, we propose a novel distance estimator for estimating the distance between two nodes a and b using indirect link measurements, which are the measurements made between a and k, for k ? b and b and k, for k ? a. Traditionally, distance estimators use only direct link measurement, which is the pairwise measurement between the nodes a and b. The results show that the estimator that uses indirect link measurements enables better distance estimation than the estimator that uses direct link measurements

Machine Learning in Wireless Sensor Networks: Algorithms, Strategies, and Applications

Wireless sensor networks monitor dynamic environments that change rapidly over time. This dynamic behavior is either caused by external factors or initiated by the system designers themselves. To adapt to such conditions, sensor networks often adopt machine learning techniques to eliminate the need for unnecessary redesign. Machine learning also inspires many practical solutions that maximize resource utilization and prolong the lifespan of the network. In this paper, we present an extensive literature review over the period 2002-2013 of machine learning methods that were used to address common issues in wireless sensor networks (WSNs). The advantages and disadvantages of each proposed algorithm are evaluated against the corresponding problem. We also provide a comparative guide to aid WSN designers in developing suitable machine learning solutions for their specific application challenges.Comment: Accepted for publication in IEEE Communications Surveys and Tutorial

Improving a wireless localization system via machine learning techniques and security protocols

The recent advancements made in Internet of Things (IoT) devices have brought forth new opportunities for technologies and systems to be integrated into our everyday life. In this work, we investigate how edge nodes can effectively utilize 802.11 wireless beacon frames being broadcast from pre-existing access points in a building to achieve room-level localization. We explain the needed hardware and software for this system and demonstrate a proof of concept with experimental data analysis. Improvements to localization accuracy are shown via machine learning by implementing the random forest algorithm. Using this algorithm, historical data can train the model and make more informed decisions while tracking other nodes in the future. We also include multiple security protocols that can be taken to reduce the threat of both physical and digital attacks on the system. These threats include access point spoofing, side channel analysis, and packet sniffing, all of which are often overlooked in IoT devices that are rushed to market. Our research demonstrates the comprehensive combination of affordability, accuracy, and security possible in an IoT beacon frame-based localization system that has not been fully explored by the localization research community