Acceleration of the hardware-software interface of a communication device for parallel systems

During the last decades the ever growing need for computational power fostered the development of parallel computer architectures. Applications need to be parallelized and optimized to be able to exploit modern system architectures. Today, scalability of applications is more and more limited both by development resources, as programming of complex parallel applications becomes increasingly demanding, and by the fundamental scalability issues introduced by the cost of communication in distributed memory systems. Lowering the latency of communication is mandatory to increase scalability and serves as an enabling technology for programming of distributed memory systems at a higher abstraction layer using higher degrees of compiler driven automation. At the same time it can increase performance of such systems in general. In this work, the software/hardware interface and the network interface controller functions of the EXTOLL network architecture, which is specifically designed to satisfy the needs of low-latency networking for high-performance computing, is presented. Several new architectural contributions are made in this thesis, namely a new efficient method for virtual-tophysical address-translation named ATU and a novel method to issue operations to a virtual device in an optimal way which has been termed Transactional I/O. This new method needs changes in the architecture of the host CPU the device is connected to. Two additional methods that emulate most of the characteristics of Transactional I/O are developed and employed in the development of the EXTOLL hardware to facilitate usage together with contemporary CPUs. These new methods heavily leverage properties of the HyperTransport interface used to connect the device to the CPU. Finally, this thesis also introduces an optimized remote-memory-access architecture for efficient split-phase transactions and atomic operations. The complete architecture has been prototyped using FPGA technology enabling a more precise analysis and verification than is possible using simulation alone. The resulting design utilizes 95 % of a 90 nm FPGA device and reaches speeds of 200 MHz and 156 MHz in the different clock domains of the design. The EXTOLL software stack is developed and a performance evaluation of the software using the EXTOLL hardware is performed. The performance evaluation shows an excellent start-up latency value of 1.3 μs, which competes with the most advanced networks available, in spite of the technological performance handicap encountered by FPGA technology. The resulting network is, to the best of the knowledge of the author, the fastest FPGA-based interconnection network for commodity processors ever built

Datacenter Traffic Control: Understanding Techniques and Trade-offs

Datacenters provide cost-effective and flexible access to scalable compute and storage resources necessary for today's cloud computing needs. A typical datacenter is made up of thousands of servers connected with a large network and usually managed by one operator. To provide quality access to the variety of applications and services hosted on datacenters and maximize performance, it deems necessary to use datacenter networks effectively and efficiently. Datacenter traffic is often a mix of several classes with different priorities and requirements. This includes user-generated interactive traffic, traffic with deadlines, and long-running traffic. To this end, custom transport protocols and traffic management techniques have been developed to improve datacenter network performance. In this tutorial paper, we review the general architecture of datacenter networks, various topologies proposed for them, their traffic properties, general traffic control challenges in datacenters and general traffic control objectives. The purpose of this paper is to bring out the important characteristics of traffic control in datacenters and not to survey all existing solutions (as it is virtually impossible due to massive body of existing research). We hope to provide readers with a wide range of options and factors while considering a variety of traffic control mechanisms. We discuss various characteristics of datacenter traffic control including management schemes, transmission control, traffic shaping, prioritization, load balancing, multipathing, and traffic scheduling. Next, we point to several open challenges as well as new and interesting networking paradigms. At the end of this paper, we briefly review inter-datacenter networks that connect geographically dispersed datacenters which have been receiving increasing attention recently and pose interesting and novel research problems.Comment: Accepted for Publication in IEEE Communications Surveys and Tutorial

OSMOSIS: Enabling Multi-Tenancy in Datacenter SmartNICs

Multi-tenancy is essential for unleashing SmartNIC's potential in datacenters. Our systematic analysis in this work shows that existing on-path SmartNICs have resource multiplexing limitations. For example, existing solutions lack multi-tenancy capabilities such as performance isolation and QoS provisioning for compute and IO resources. Compared to standard NIC data paths with a well-defined set of offloaded functions, unpredictable execution times of SmartNIC kernels make conventional approaches for multi-tenancy and QoS insufficient. We fill this gap with OSMOSIS, a SmartNICs resource manager co-design. OSMOSIS extends existing OS mechanisms to enable dynamic hardware resource multiplexing on top of the on-path packet processing data plane. We implement OSMOSIS within an open-source RISC-V-based 400Gbit/s SmartNIC. Our performance results demonstrate that OSMOSIS fully supports multi-tenancy and enables broader adoption of SmartNICs in datacenters with low overhead.Comment: 12 pages, 14 figures, 103 reference

Proceedings of the Second International Workshop on HyperTransport Research and Applications (WHTRA2011)

Proceedings of the Second International Workshop on HyperTransport Research and Applications (WHTRA2011) which was held Feb. 9th 2011 in Mannheim, Germany. The Second International Workshop for Research on HyperTransport is an international high quality forum for scientists, researches and developers working in the area of HyperTransport. This includes not only developments and research in HyperTransport itself, but also work which is based on or enabled by HyperTransport. HyperTransport (HT) is an interconnection technology which is typically used as system interconnect in modern computer systems, connecting the CPUs among each other and with the I/O bridges. Primarily designed as interconnect between high performance CPUs it provides an extremely low latency, high bandwidth and excellent scalability. The definition of the HTX connector allows the use of HT even for add-in cards. In opposition to other peripheral interconnect technologies like PCI-Express no protocol conversion or intermediate bridging is necessary. HT is a direct connection between device and CPU with minimal latency. Another advantage is the possibility of cache coherent devices. Because of these properties HT is of high interest for high performance I/O like networking and storage, but also for co-processing and acceleration based on ASIC or FPGA technologies. In particular acceleration sees a resurgence of interest today. One reason is the possibility to reduce power consumption by the use of accelerators. In the area of parallel computing the low latency communication allows for fine grain communication schemes and is perfectly suited for scalable systems. Summing up, HT technology offers key advantages and great performance to any research aspect related to or based on interconnects. For more information please consult the workshop website (http://whtra.uni-hd.de)

Accelerating Network Communication and I/O in Scientific High Performance Computing Environments

High performance computing has become one of the major drivers behind technology inventions and science discoveries. Originally driven through the increase of operating frequencies and technology scaling, a recent slowdown in this evolution has led to the development of multi-core architectures, which are supported by accelerator devices such as graphics processing units (GPUs). With the upcoming exascale era, the overall power consumption and the gap between compute capabilities and I/O bandwidth have become major challenges. Nowadays, the system performance is dominated by the time spent in communication and I/O, which highly depends on the capabilities of the network interface. In order to cope with the extreme concurrency and heterogeneity of future systems, the software ecosystem of the interconnect needs to be carefully tuned to excel in reliability, programmability, and usability. This work identifies and addresses three major gaps in today's interconnect software systems. The I/O gap describes the disparity in operating speeds between the computing capabilities and second storage tiers. The communication gap is introduced through the communication overhead needed to synchronize distributed large-scale applications and the mixed workload. The last gap is the so called concurrency gap, which is introduced through the extreme concurrency and the inflicted learning curve posed to scientific application developers to exploit the hardware capabilities. The first contribution is the introduction of the network-attached accelerator approach, which moves accelerators into a "stand-alone" cluster connected through the Extoll interconnect. The novel communication architecture enables the direct accelerators communication without any host interactions and an optimal application-to-compute-resources mapping. The effectiveness of this approach is evaluated for two classes of accelerators: Intel Xeon Phi coprocessors and NVIDIA GPUs. The next contribution comprises the design, implementation, and evaluation of the support of legacy codes and protocols over the Extoll interconnect technology. By providing TCP/IP protocol support over Extoll, it is shown that the performance benefits of the interconnect can be fully leveraged by a broader range of applications, including the seamless support of legacy codes. The third contribution is twofold. First, a comprehensive analysis of the Lustre networking protocol semantics and interfaces is presented. Afterwards, these insights are utilized to map the LNET protocol semantics onto the Extoll networking technology. The result is a fully functional Lustre network driver for Extoll. An initial performance evaluation demonstrates promising bandwidth and message rate results. The last contribution comprises the design, implementation, and evaluation of two easy-to-use load balancing frameworks, which transparently distribute the I/O workload across all available storage system components. The solutions maximize the parallelization and throughput of file I/O. The frameworks are evaluated on the Titan supercomputing systems for three I/O interfaces. For example for large-scale application runs, POSIX I/O and MPI-IO can be improved by up to 50% on a per job basis, while HDF5 shows performance improvements of up to 32%

A cross-stack, network-centric architectural design for next-generation datacenters

This thesis proposes a full-stack, cross-layer datacenter architecture based on in-network computing and near-memory processing paradigms. The proposed datacenter architecture is built atop two principles: (1) utilizing commodity, off-the-shelf hardware (i.e., processor, DRAM, and network devices) with minimal changes to their architecture, and (2) providing a standard interface to the programmers for using the novel hardware. More specifically, the proposed datacenter architecture enables a smart network adapter to collectively compress/decompress data exchange between distributed DNN training nodes and assist the operating system in performing aggressive processor power management. It also deploys specialized memory modules in the servers, capable of performing general-purpose computation and network connectivity. This thesis unlocks the potentials of hardware and operating system co-design in architecting application-transparent, near-data processing hardware for improving datacenter's performance, energy efficiency, and scalability. We evaluate the proposed datacenter architecture using a combination of full-system simulation, FPGA prototyping, and real-system experiments