Memory Subsystem Optimization Techniques for Modern High-Performance General-Purpose Processors

abstract: General-purpose processors propel the advances and innovations that are the subject of humanity’s many endeavors. Catering to this demand, chip-multiprocessors (CMPs) and general-purpose graphics processing units (GPGPUs) have seen many high-performance innovations in their architectures. With these advances, the memory subsystem has become the performance- and energy-limiting aspect of CMPs and GPGPUs alike. This dissertation identifies and mitigates the key performance and energy-efficiency bottlenecks in the memory subsystem of general-purpose processors via novel, practical, microarchitecture and system-architecture solutions. Addressing the important Last Level Cache (LLC) management problem in CMPs, I observe that LLC management decisions made in isolation, as in prior proposals, often lead to sub-optimal system performance. I demonstrate that in order to maximize system performance, it is essential to manage the LLCs while being cognizant of its interaction with the system main memory. I propose ReMAP, which reduces the net memory access cost by evicting cache lines that either have no reuse, or have low memory access cost. ReMAP improves the performance of the CMP system by as much as 13%, and by an average of 6.5%. Rather than the LLC, the L1 data cache has a pronounced impact on GPGPU performance by acting as the bandwidth filter for the rest of the memory subsystem. Prior work has shown that the severely constrained data cache capacity in GPGPUs leads to sub-optimal performance. In this thesis, I propose two novel techniques that address the GPGPU data cache capacity problem. I propose ID-Cache that performs effective cache bypassing and cache line size selection to improve cache capacity utilization. Next, I propose LATTE-CC that considers the GPU’s latency tolerance feature and adaptively compresses the data stored in the data cache, thereby increasing its effective capacity. ID-Cache and LATTE-CC are shown to achieve 71% and 19.2% speedup, respectively, over a wide variety of GPGPU applications. Complementing the aforementioned microarchitecture techniques, I identify the need for system architecture innovations to sustain performance scalability of GPG- PUs in the face of slowing Moore’s Law. I propose a novel GPU architecture called the Multi-Chip-Module GPU (MCM-GPU) that integrates multiple GPU modules to form a single logical GPU. With intelligent memory subsystem optimizations tailored for MCM-GPUs, it can achieve within 7% of the performance of a similar but hypothetical monolithic die GPU. Taking a step further, I present an in-depth study of the energy-efficiency characteristics of future MCM-GPUs. I demonstrate that the inherent non-uniform memory access side-effects form the key energy-efficiency bottleneck in the future. In summary, this thesis offers key insights into the performance and energy-efficiency bottlenecks in CMPs and GPGPUs, which can guide future architects towards developing high-performance and energy-efficient general-purpose processors.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Adaptive memory-side last-level GPU caching

Emerging GPU applications exhibit increasingly high computation demands which has led GPU manufacturers to build GPUs with an increasingly large number of streaming multiprocessors (SMs). Providing data to the SMs at high bandwidth puts significant pressure on the memory hierarchy and the Network-on-Chip (NoC). Current GPUs typically partition the memory-side last-level cache (LLC) in equally-sized slices that are shared by all SMs. Although a shared LLC typically results in a lower miss rate, we find that for workloads with high degrees of data sharing across SMs, a private LLC leads to a significant performance advantage because of increased bandwidth to replicated cache lines across different LLC slices. In this paper, we propose adaptive memory-side last-level GPU caching to boost performance for sharing-intensive workloads that need high bandwidth to read-only shared data. Adaptive caching leverages a lightweight performance model that balances increased LLC bandwidth against increased miss rate under private caching. In addition to improving performance for sharing-intensive workloads, adaptive caching also saves energy in a (co-designed) hierarchical two-stage crossbar NoC by power-gating and bypassing the second stage if the LLC is configured as a private cache. Our experimental results using 17 GPU workloads show that adaptive caching improves performance by 28.1% on average (up to 38.1%) compared to a shared LLC for sharing-intensive workloads. In addition, adaptive caching reduces NoC energy by 26.6% on average (up to 29.7%) and total system energy by 6.1% on average (up to 27.2%) when configured as a private cache. Finally, we demonstrate through a GPU NoC design space exploration that a hierarchical two-stage crossbar is both more power- and area-efficient than full and concentrated crossbars with the same bisection bandwidth, thus providing a low-cost cooperative solution to exploit workload sharing behavior in memory-side last-level caches

Runtime-assisted optimizations in the on-chip memory hierarchy

Following Moore's Law, the number of transistors on chip has been increasing exponentially, which has led to the increasing complexity of modern processors. As a result, the efficient programming of such systems has become more difficult. Many programming models have been developed to answer this issue. Of particular interest are task-based programming models that employ simple annotations to define parallel work in an application. The information available at the level of the runtime systems associated with these programming models offers great potential for improving hardware design. Moreover, due to technological limitations, Moore's Law is predicted to eventually come to an end, so novel paradigms are necessary to maintain the current performance improvement trends. The main goal of this thesis is to exploit the knowledge about a parallel application available at the runtime system level to improve the design of the on-chip memory hierarchy. The coupling of the runtime system and the microprocessor enables a better hardware design without hurting the programmability. The first contribution is a set of insertion policies for shared last-level caches that exploit information about tasks and task data dependencies. The intuition behind this proposal revolves around the observation that parallel threads exhibit different memory access patterns. Even within the same thread, accesses to different variables often follow distinct patterns. The proposed policies insert cache lines into different logical positions depending on the dependency type and task type to which the corresponding memory request belongs. The second proposal optimizes the execution of reductions, defined as a programming pattern that combines input data to form the resulting reduction variable. This is achieved with a runtime-assisted technique for performing reductions in the processor's cache hierarchy. The proposal's goal is to be a universally applicable solution regardless of the reduction variable type, size and access pattern. On the software level, the programming model is extended to let a programmer specify the reduction variables for tasks, as well as the desired cache level where a certain reduction will be performed. The source-to-source compiler and the runtime system are extended to translate and forward this information to the underlying hardware. On the hardware level, private and shared caches are equipped with functional units and the accompanying logic to perform reductions at the cache level. This design avoids unnecessary data movements to the core and back as the data is operated at the place where it resides. The third contribution is a runtime-assisted prioritization scheme for memory requests inside the on-chip memory hierarchy. The proposal is based on the notion of a critical path in the context of parallel codes and a known fact that accelerating critical tasks reduces the execution time of the whole application. In the context of this work, task criticality is observed at a level of a task type as it enables simple annotation by the programmer. The acceleration of critical tasks is achieved by the prioritization of corresponding memory requests in the microprocessor.Siguiendo la ley de Moore, el número de transistores en los chips ha crecido exponencialmente, lo que ha comportado una mayor complejidad en los procesadores modernos y, como resultado, de la dificultad de la programación eficiente de estos sistemas. Se han desarrollado muchos modelos de programación para resolver este problema; un ejemplo particular son los modelos de programación basados en tareas, que emplean anotaciones sencillas para definir los Trabajos paralelos de una aplicación. La información de que disponen los sistemas en tiempo de ejecución (runtime systems) asociada con estos modelos de programación ofrece un enorme potencial para la mejora del diseño del hardware. Por otro lado, las limitaciones tecnológicas hacen que la ley de Moore pueda dejar de cumplirse próximamente, por lo que se necesitan paradigmas nuevos para mantener las tendencias actuales de mejora de rendimiento. El objetivo principal de esta tesis es aprovechar el conocimiento de las aplicaciones paral·leles de que dispone el runtime system para mejorar el diseño de la jerarquía de memoria del chip. El acoplamiento del runtime system junto con el microprocesador permite realizar mejores diseños hardware sin afectar Negativamente en la programabilidad de dichos sistemas. La primera contribución de esta tesis consiste en un conjunto de políticas de inserción para las memorias caché compartidas de último nivel que aprovecha la información de las tareas y las dependencias de datos entre estas. La intuición tras esta propuesta se basa en la observación de que los hilos de ejecución paralelos muestran distintos patrones de acceso a memoria e, incluso dentro del mismo hilo, los accesos a diferentes variables a menudo siguen patrones distintos. Las políticas que se proponen insertan líneas de caché en posiciones lógicas diferentes en función de los tipos de dependencia y tarea a los que corresponde la petición de memoria. La segunda propuesta optimiza la ejecución de las reducciones, que se definen como un patrón de programación que combina datos de entrada para conseguir la variable de reducción como resultado. Esto se consigue mediante una técnica asistida por el runtime system para la realización de reducciones en la jerarquía de la caché del procesador, con el objetivo de ser una solución aplicable de forma universal sin depender del tipo de la variable de la reducción, su tamaño o el patrón de acceso. A nivel de software, el modelo de programación se extiende para que el programador especifique las variables de reducción de las tareas, así como el nivel de caché escogido para que se realice una determinada reducción. El compilador fuente a Fuente (compilador source-to-source) y el runtime ssytem se modifican para que traduzcan y pasen esta información al hardware subyacente, evitando así movimientos de datos innecesarios hacia y desde el núcleo del procesador, al realizarse la operación donde se encuentran los datos de la misma. La tercera contribución proporciona un esquema de priorización asistido por el runtime system para peticiones de memoria dentro de la jerarquía de memoria del chip. La propuesta se basa en la noción de camino crítico en el contexto de los códigos paralelos y en el hecho conocido de que acelerar tareas críticas reduce el tiempo de ejecución de la aplicación completa. En el contexto de este trabajo, la criticidad de las tareas se considera a nivel del tipo de tarea ya que permite que el programador las indique mediante anotaciones sencillas. La aceleración de las tareas críticas se consigue priorizando las correspondientes peticiones de memoria en el microprocesador.Seguint la llei de Moore, el nombre de transistors que contenen els xips ha patit un creixement exponencial, fet que ha provocat un augment de la complexitat dels processadors moderns i, per tant, de la dificultat de la programació eficient d’aquests sistemes. Per intentar solucionar-ho, s’han desenvolupat diversos models de programació; un exemple particular en són els models basats en tasques, que fan servir anotacions senzilles per definir treballs paral·lels dins d’una aplicació. La informació que hi ha al nivell dels sistemes en temps d’execució (runtime systems) associada amb aquests models de programació ofereix un gran potencial a l’hora de millorar el disseny del maquinari. D’altra banda, les limitacions tecnològiques fan que la llei de Moore pugui deixar de complir-se properament, per la qual cosa calen nous paradigmes per mantenir les tendències actuals en la millora de rendiment. L’objectiu principal d’aquesta tesi és aprofitar els coneixements que el runtime System té d’una aplicació paral·lela per millorar el disseny de la jerarquia de memòria dins el xip. L’acoblament del runtime system i el microprocessador permet millorar el disseny del maquinari sense malmetre la programabilitat d’aquests sistemes. La primera contribució d’aquesta tesi consisteix en un conjunt de polítiques d’inserció a les memòries cau (cache memories) compartides d’últim nivell que aprofita informació sobre tasques i les dependències de dades entre aquestes. La intuïció que hi ha al darrere d’aquesta proposta es basa en el fet que els fils d’execució paral·lels mostren diferents patrons d’accés a la memòria; fins i tot dins el mateix fil, els accessos a variables diferents sovint segueixen patrons diferents. Les polítiques que s’hi proposen insereixen línies de la memòria cau a diferents ubicacions lògiques en funció dels tipus de dependència i de tasca als quals correspon la petició de memòria. La segona proposta optimitza l’execució de les reduccions, que es defineixen com un patró de programació que combina dades d’entrada per aconseguir la variable de reducció com a resultat. Això s’aconsegueix mitjançant una tècnica assistida pel runtime system per dur a terme reduccions en la jerarquia de la memòria cau del processador, amb l’objectiu que la proposta sigui aplicable de manera universal, sense dependre del tipus de la variable a la qual es realitza la reducció, la seva mida o el patró d’accés. A nivell de programari, es realitza una extensió del model de programació per facilitar que el programador especifiqui les variables de les reduccions que usaran les tasques, així com el nivell de memòria cau desitjat on s’hauria de realitzar una certa reducció. El compilador font a font (compilador source-to-source) i el runtime system s’amplien per traduir i passar aquesta informació al maquinari subjacent. A nivell de maquinari, les memòries cau privades i compartides s’equipen amb unitats funcionals i la lògica corresponent per poder dur a terme les reduccions a la pròpia memòria cau, evitant així moviments de dades innecessaris entre el nucli del processador i la jerarquia de memòria. La tercera contribució proporciona un esquema de priorització assistit pel runtime System per peticions de memòria dins de la jerarquia de memòria del xip. La proposta es basa en la noció de camí crític en el context dels codis paral·lels i en el fet conegut que l’acceleració de les tasques que formen part del camí crític redueix el temps d’execució de l’aplicació sencera. En el context d’aquest treball, la criticitat de les tasques s’observa al nivell del seu tipus ja que permet que el programador les indiqui mitjançant anotacions senzilles. L’acceleració de les tasques crítiques s’aconsegueix prioritzant les corresponents peticions de memòria dins el microprocessador

Reuse Distance Analysis for Large-Scale Chip Multiprocessors

Multicore Reuse Distance (RD) analysis is a powerful tool that can potentially provide a parallel program's detailed memory behavior. Concurrent Reuse Distance (CRD) and Private-stack Reuse Distance (PRD) measure RD across thread-interleaved memory reference streams, addressing shared and private caches. Sensitivity to memory interleaving makes CRD and PRD profiles architecture dependent, preventing them from analyzing different processor configurations. However such instability is minimal when all threads exhibit similar data-locality patterns. For loop-based parallel programs, interleaving threads are symmetric. CRD and PRD profiles are stable across cache size scaling, and exhibit predictable coherent movement across core count scaling. Hence, multicore RD analysis can provide accurate analysis for different processor configurations. Due to the prevalence of parallel loops, RD analysis will be valuable to multicore designers. This dissertation uses RD analysis to analyze multicore cache performance for loop-based parallel programs. First, we study the impacts of core count scaling and problem size scaling on CRD and PRD profiles. Two application parameters with architectural implications are identified: Ccore and Cshare. Core count scaling only impacts cache performance significantly below Ccore in shared caches, and Cshare is the capacity at which shared caches begin to outperform private caches in terms of data locality. Then, we develop techniques, in particular employing reference groups, to predict the coherent movement of CRD and PRD profiles due to scaling, and achieve accuracy of 80%-96%. After comparing our prediction techniques against profile sampling, we find that the prediction achieves higher speedup and accuracy, especially when the design space is large. Moreover, we evaluate the accuracy of using CRD and PRD profile predictions to estimate multicore cache performance, especially MPKI. When combined with the existing problem scaling prediction, our techniques can predict shared LLC (private L2 cache) MPKI to within 12% (14%) of simulation across 1,728 (1,440) configurations using only 36 measured CRD (PRD) profiles. Lastly, we propose a new framework based on RD analysis to optimize multicore cache hierarchies. Our study not only reveals several new insights, but it also demonstrates that RD analysis can help computer architects improve multicore designs

Performance Optimization Strategies for Transactional Memory Applications

This thesis presents tools for Transactional Memory (TM) applications that cover multiple TM systems (Software, Hardware, and hybrid TM) and use information of all different layers of the TM software stack. Therefore, this thesis addresses a number of challenges to extract static information, information about the run time behavior, and expert-level knowledge to develop these new methods and strategies for the optimization of TM applications

Adaptive Microarchitectural Optimizations to Improve Performance and Security of Multi-Core Architectures

With the current technological barriers, microarchitectural optimizations are increasingly important to ensure performance scalability of computing systems. The shift to multi-core architectures increases the demands on the memory system, and amplifies the role of microarchitectural optimizations in performance improvement. In a multi-core system, microarchitectural resources are usually shared, such as the cache, to maximize utilization but sharing can also lead to contention and lower performance. This can be mitigated through partitioning of shared caches.However, microarchitectural optimizations which were assumed to be fundamentally secure for a long time, can be used in side-channel attacks to exploit secrets, as cryptographic keys. Timing-based side-channels exploit predictable timing variations due to the interaction with microarchitectural optimizations during program execution. Going forward, there is a strong need to be able to leverage microarchitectural optimizations for performance without compromising security. This thesis contributes with three adaptive microarchitectural resource management optimizations to improve security and/or\ua0performance\ua0of multi-core architectures\ua0and a systematization-of-knowledge of timing-based side-channel attacks.\ua0We observe that to achieve high-performance cache partitioning in a multi-core system\ua0three requirements need to be met: i) fine-granularity of partitions, ii) locality-aware placement and iii) frequent changes. These requirements lead to\ua0high overheads for current centralized partitioning solutions, especially as the number of cores in the\ua0system increases. To address this problem, we present an adaptive and scalable cache partitioning solution (DELTA) using a distributed and asynchronous allocation algorithm. The\ua0allocations occur through core-to-core challenges, where applications with larger performance benefit will gain cache capacity. The\ua0solution is implementable in hardware, due to low computational complexity, and can scale to large core counts.According to our analysis, better performance can be achieved by coordination of multiple optimizations for different resources, e.g., off-chip bandwidth and cache, but is challenging due to the increased number of possible allocations which need to be evaluated.\ua0Based on these observations, we present a solution (CBP) for coordinated management of the optimizations: cache partitioning, bandwidth partitioning and prefetching.\ua0Efficient allocations, considering the inter-resource interactions and trade-offs, are achieved using local resource managers to limit the solution space.The continuously growing number of\ua0side-channel attacks leveraging\ua0microarchitectural optimizations prompts us to review attacks and defenses to understand the vulnerabilities of different microarchitectural optimizations. We identify the four root causes of timing-based side-channel attacks: determinism, sharing, access violation\ua0and information flow.\ua0Our key insight is that eliminating any of the exploited root causes, in any of the attack steps, is enough to provide protection.\ua0Based on our framework, we present a systematization of the attacks and defenses on a wide range of microarchitectural optimizations, which highlights their key similarities.\ua0Shared caches are an attractive attack surface for side-channel attacks, while defenses need to be efficient since the cache is crucial for performance.\ua0To address this issue, we present an adaptive and scalable cache partitioning solution (SCALE) for protection against cache side-channel attacks. The solution leverages randomness,\ua0and provides quantifiable and information theoretic security guarantees using differential privacy. The solution closes the performance gap to a state-of-the-art non-secure allocation policy for a mix of secure and non-secure applications

Addressing Memory Bottlenecks for Emerging Applications

There has been a recent emergence of applications from the domain of machine learning, data mining, numerical analysis and image processing. These applications are becoming the primary algorithms driving many important user-facing applications and becoming pervasive in our daily lives. Due to their increasing usage in both mobile and datacenter workloads, it is necessary to understand the software and hardware demands of these applications, and design techniques to match their growing needs. This dissertation studies the performance bottlenecks that arise when we try to improve the performance of these applications on current hardware systems. We observe that most of these applications are data-intensive, i.e., they operate on a large amount of data. Consequently, these applications put significant pressure on the memory. Interestingly, we notice that this pressure is not just limited to one memory structure. Instead, different applications stress different levels of the memory hierarchy. For example, training Deep Neural Networks (DNN), an emerging machine learning approach, is currently limited by the size of the GPU main memory. On the other spectrum, improving DNN inference on CPUs is bottlenecked by Physical Register File (PRF) bandwidth. Concretely, this dissertation tackles four such memory bottlenecks for these emerging applications across the memory hierarchy (off-chip memory, on-chip memory and physical register file), presenting hardware and software techniques to address these bottlenecks and improve the performance of the emerging applications. For on-chip memory, we present two scenarios where emerging applications perform at a sub-optimal performance. First, many applications have a large number of marginal bits that do not contribute to the application accuracy, wasting unnecessary space and transfer costs. We present ACME, an asymmetric compute-memory paradigm, that removes marginal bits from the memory hierarchy while performing the computation in full precision. Second, we tackle the contention in shared caches for these emerging applications that arise in datacenters where multiple applications can share the same cache capacity. We present ShapeShifter, a runtime system that continuously monitors the runtime environment, detects changes in the cache availability and dynamically recompiles the application on the fly to efficiently utilize the cache capacity. For physical register file, we observe that DNN inference on CPUs is primarily limited by the PRF bandwidth. Increasing the number of compute units in CPU requires increasing the read ports in the PRF. In this case, PRF quickly reaches a point where latency could no longer be met. To solve this problem, we present LEDL, locality extensions for deep learning on CPUs, that entails a rearchitected FMA and PRF design tailored for the heavy data reuse inherent in DNN inference. Finally, a significant challenge facing both the researchers and industry practitioners is that as the DNNs grow deeper and larger, the DNN training is limited by the size of the GPU main memory, restricting the size of the networks which GPUs can train. To tackle this challenge, we first identify the primary contributors to this heavy memory footprint, finding that the feature maps (intermediate layer outputs) are the heaviest contributors in training as opposed to the weights in inference. Then, we present Gist, a runtime system, that uses three efficient data encoding techniques to reduce the footprint of DNN training.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/146016/1/anijain_1.pd

Scale-Out Processors

Global-scale online services, such as Google’s Web search and Facebook’s social networking, run in large-scale datacenters. Due to their massive scale, these services are designed to scale out (or distribute) their respective loads and datasets across thousands of servers in datacenters. The growing demand for online services forced service providers to build networks of datacenters, which require an enormous capital outlay for infrastructure, hardware, and power consumption. Consequently, efficiency has become a major concern in the design and operation of such datacenters, with processor efficiency being of, utmost importance, due to the significant contribution of processors to the overall datacenter performance and cost. Scale-out workloads, which are behind today’s online services, serve independent requests, and have large instruction footprints and little data locality. As such, they benefit from processor designs that feature many cores and a modestly sized Last-Level Cache (LLC), a fast access path to the LLC, and high-bandwidth interfaces to memory. Existing server-class processors with large LLCs and a handful of aggressive out-of-order cores are inefficient in executing scale-out workloads. Moreover, the scaling trajectory for these processors leads to even lower efficiency in future technology nodes. This thesis presents a family of throughput-optimal processors, called Scale-Out Processors, for the efficient execution of scale-out workloads. A unique feature of Scale-Out Processors is that they consist of multiple stand-alone modules, called pods, wherein each module is a server running an operating system and a full software stack. To design a throughput-optimal processor, we developed a methodology based on performance density, defined as throughput per unit area, to quantify how effectively an architecture uses the silicon real estate. The proposed methodology derives a performance-density optimal processor building block (i.e., pod), which tightly couples a number of cores to a small LLC via a fast interconnect. Scale-Out Processors simply consist of multiple pods with no inter-pod connectivity or coherence. Moreover, they deliver the highest throughput in today’s technology and afford near-ideal scalability as process technology advances. We demonstrate that Scale-Out Processors improve datacenters’ efficiency by 4.4x-7.1x over datacenters designed using existing server-class processors

Towards Closing the Programmability-Efficiency Gap using Software-Defined Hardware

The past decade has seen the breakdown of two important trends in the computing industry: Moore’s law, an observation that the number of transistors in a chip roughly doubles every eighteen months, and Dennard scaling, that enabled the use of these transistors within a constant power budget. This has caused a surge in domain-specific accelerators, i.e. specialized hardware that deliver significantly better energy efficiency than general-purpose processors, such as CPUs. While the performance and efficiency of such accelerators are highly desirable, the fast pace of algorithmic innovation and non-recurring engineering costs have deterred their widespread use, since they are only programmable across a narrow set of applications. This has engendered a programmability-efficiency gap across contemporary platforms. A practical solution that can close this gap is thus lucrative and is likely to engender broad impact in both academic research and the industry. This dissertation proposes such a solution with a reconfigurable Software-Defined Hardware (SDH) system that morphs parts of the hardware on-the-fly to tailor to the requirements of each application phase. This system is designed to deliver near-accelerator-level efficiency across a broad set of applications, while retaining CPU-like programmability. The dissertation first presents a fixed-function solution to accelerate sparse matrix multiplication, which forms the basis of many applications in graph analytics and scientific computing. The solution consists of a tiled hardware architecture, co-designed with the outer product algorithm for Sparse Matrix-Matrix multiplication (SpMM), that uses on-chip memory reconfiguration to accelerate each phase of the algorithm. A proof-of-concept is then presented in the form of a prototyped 40 nm Complimentary Metal-Oxide Semiconductor (CMOS) chip that demonstrates energy efficiency and performance per die area improvements of 12.6x and 17.1x over a high-end CPU, and serves as a stepping stone towards a full SDH system. The next piece of the dissertation enhances the proposed hardware with reconfigurability of the dataflow and resource sharing modes, in order to extend acceleration support to a set of common parallelizable workloads. This reconfigurability lends the system the ability to cater to discrete data access and compute patterns, such as workloads with extensive data sharing and reuse, workloads with limited reuse and streaming access patterns, among others. Moreover, this system incorporates commercial cores and a prototyped software stack for CPU-level programmability. The proposed system is evaluated on a diverse set of compute-bound and memory-bound kernels that compose applications in the domains of graph analytics, machine learning, image and language processing. The evaluation shows average performance and energy-efficiency gains of 5.0x and 18.4x over the CPU. The final part of the dissertation proposes a runtime control framework that uses low-cost monitoring of hardware performance counters to predict the next best configuration and reconfigure the hardware, upon detecting a change in phase or nature of data within the application. In comparison to prior work, this contribution targets multicore CGRAs, uses low-overhead decision tree based predictive models, and incorporates reconfiguration cost-awareness into its policies. Compared to the best-average static (non-reconfiguring) configuration, the dynamically reconfigurable system achieves a 1.6x improvement in performance-per-Watt in the Energy-Efficient mode of operation, or the same performance with 23% lower energy in the Power-Performance mode, for SpMM across a suite of real-world inputs. The proposed reconfiguration mechanism itself outperforms the state-of-the-art approach for dynamic runtime control by up to 2.9x in terms of energy-efficiency.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/169859/1/subh_1.pd