Modeling EMI Resulting from a Signal Via Transition Through Power/Ground Layers

Signal transitioning through layers on vias are very common in multi-layer printed circuit board (PCB) design. For a signal via transitioning through the internal power and ground planes, the return current must switch from one reference plane to another reference plane. The discontinuity of the return current at the via excites the power and ground planes, and results in noise on the power bus that can lead to signal integrity, as well as EMI problems. Numerical methods, such as the finite-difference time-domain (FDTD), Moment of Methods (MoM), and partial element equivalent circuit (PEEC) method, were employed herein to study this problem. The modeled results are supported by measurements. In addition, a common EMI mitigation approach of adding a decoupling capacitor was investigated with the FDTD method

Automated design optimisation and simulation of stitched antennas for textile devices

This thesis describes a novel approach for designing 7-segment and 5-angle pocket and collar planar antennas (for operation at 900 MHz). The motivation for this work originates from the problem of security of children in rural Nigeria where there is risk of abduction. There is a strong potential benefit to be gained from hidden wireless tracking devices (and hence antennas) that can protect their security. An evolutionary method based on a genetic algorithm was used in conjunction with electromagnetic simulation. This method determines the segment length and angle between segments through several generations. The simulation of the antenna was implemented using heuristic crossover with non-uniform mutation. Antennas obtained from the algorithm were fabricated and measured to validate the proposed method.This first part of this research has been limited to linear wire antennas because of the wide range and flexibility of this class of antennas. Linear wire antennas are used for the design of high or low gain, broad or narrow band antennas. Wire antennas are easy and inexpensive to build. All the optimised linear wire antenna samples exhibit similar performances, most of the power is radiated within the GSM900 frequency band. The reflection coefficient (S11) is generally better than -10dB. The method of moment (MoM-NEC2) and FIT (CST Studio Suite 2015) solvers were used for this design. MATLAB is used to as an interface to control computational electromagnetic solvers for antenna designs and analysis. The genetic algorithm procedures were written in MATLAB. The second part of the work focuses on meshed ground planes for applications at 900 MHz global system for mobile communications (GSM), 2.45 GHz industrial, scientific, and medical (ISM) band and 5 GHz wearable wireless local area networks (WLAN) frequencies. Square ground planes were developed and designed using linear equations in MATLAB. The ground plane was stitched using embroidery machines. To examine the effect of meshing on the antenna performance and to normalise the meshed antenna to a reference, solid patch antenna was designed, fabricated on an FR4 substrate. A finite grid of resistors was created for numerical simulation in MATLAB. The resistance from the centre to any node of a finite grid of resistors are evaluated using nodal analysis. The probability that a node connects to each node in the grid was computed. The circuit model has been validated against the experimental model by measurement of the meshed ground plane. A set of measurement were collected from a meshed and compared with the numerical values, they show good agreement.</div

Rotated Half-Mode Substrate Integrated Waveguide and other Planar Integrated Structures

High data rate communication channels are becoming more and more integrated into our increasingly technological society. Substrate Integrated Waveguides (SIW) are one planar solution available to the microwave engineer, offering a low-loss and low dispersion means of propagating these high speed, high bandwidth signals. In this thesis, a brief synopsis of SIW structures and components is presented covering the basic waveguide propagating modes and cut-off frequencies. The main analysis techniques associated with SIWs including full wave electromagnetic modelling methods are overviewed, and the associated loss mechanisms of conduction, dielectric and radiation defined, leading to the design rules and guidelines on how best to mitigate them. SIW antennas as both leaky-wave and radiating slots are discussed and an example of a single and dual resonating slot antenna design is presented, along with a detailed review of a novel switch beam antenna developed for use within the current WiFi bands. The Slot SIW (or SSIW), which has a small longitudinal gap in one of the main conducting surfaces, allows easy integration of lumped elements or active devices, enabling the waveguide to be loaded with impedances or to be shorted. When the slot is shorted, the waveguide reverts back to the full SIW mode, and when partially loaded an intermediate state results. This is discussed, and the SSIW analysed with the transverse resonance technique, leading to the development of a travelling wave attenuator with the SSIW being periodically loaded with pin diodes. The application of the pin diodes required the use of a capacitive overlay, a development of flexi circuit design to allow capacitive coupling of impedances to connect to the waveguide. The overlay concept is extended further, to form novel passive bandpass filters, with the introduction of virtual vias. A limitation of the SSIW is that the majority of the field resides within the dielectric; this allows only a limited interaction with the field at the slot. The rotated Half Mode SIW (rHMSIW), a new variant of the SIW family, places the maximum of the electric field directly on the top dielectric surface, allowing for direct interaction. The waveguide width a is now defined by the dielectric thickness, allowing for the waveguide height b to be adjustable, in normal SIWs this is the other way round; the dielectric thickness fixing the waveguide height and the waveguide width being adjustable. The rHMSIW is characterised with regard to the height and width ratios b/a and the dielectric exposed width (which is adjustable). These parameters effect the modal cut-off frequency, this is investigated and a new equation describing the fundamental mode cut-off frequency is empirically derived. Finally a test coupon which spans the Ku band is designed and measured, which required the development of a novel waveguide transition

Application of Maxwell-Wagner polarisation in monolithic technologies

Imperial Users onl

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

Parametric Optimization of Visible Wavelength Gold Lattice Geometries for Improved Plasmon-Enhanced Fluorescence Spectroscopy

The exploitation of spectro-plasmonics will allow for innovations in optical instrumentation development and the realization of more efficient optical biodetection components. Biosensors have been shown to improve the overall quality of life through real-time detection of various antibody-antigen reactions, biomarkers, infectious diseases, pathogens, toxins, viruses, etc. has led to increased interest in the research and development of these devices. Further advancements in modern biosensor development will be realized through novel electrochemical, electromechanical, bioelectrical, and/or optical transduction methods aimed at reducing the size, cost, and limit of detection (LOD) of these sensor systems. One such method of optical transduction involves the exploitation of the plasmonic resonance of noble metal nanostructures. This thesis presents the optimization of the electric (E) field enhancement granted from localized surface plasmon resonance (LSPR) via parametric variation of periodic gold lattice geometries using finite difference time domain (FDTD) software. Comprehensive analyses of cylindrical, square, star, and triangular lattice feature geometries were performed to determine the largest surface E-field enhancement resulting from LSPR for reducing the LOD of plasmon-enhanced fluorescence (PEF). The design of an optical transducer engineered to yield peak E-field enhancement and, therefore, peak excitation enhancement of fluorescent labels would enable for improved emission enhancement of these labels. The methodology presented in this thesis details the optimization of plasmonic lattice geometries for improving current visible wavelength fluorescence spectroscopy

Radar Technology

In this book “Radar Technology”, the chapters are divided into four main topic areas: Topic area 1: “Radar Systems” consists of chapters which treat whole radar systems, environment and target functional chain. Topic area 2: “Radar Applications” shows various applications of radar systems, including meteorological radars, ground penetrating radars and glaciology. Topic area 3: “Radar Functional Chain and Signal Processing” describes several aspects of the radar signal processing. From parameter extraction, target detection over tracking and classification technologies. Topic area 4: “Radar Subsystems and Components” consists of design technology of radar subsystem components like antenna design or waveform design

Antenna Design for 5G and Beyond

With the rapid evolution of the wireless communications, fifth-generation (5G) communication has received much attention from both academia and industry, with many reported efforts and research outputs and significant improvements in different aspects, such as data rate speed and resolution, mobility, latency, etc. In some countries, the commercialization of 5G communication has already started as well as initial research of beyond technologies such as 6G.MIMO technology with multiple antennas is a promising technology to obtain the requirements of 5G/6G communications. It can significantly enhance the system capacity and resist multipath fading, and has become a hot spot in the field of wireless communications. This technology is a key component and probably the most established to truly reach the promised transfer data rates of future communication systems. In MIMO systems, multiple antennas are deployed at both the transmitter and receiver sides. The greater number of antennas can make the system more resistant to intentional jamming and interference. Massive MIMO with an especially high number of antennas can reduce energy consumption by targeting signals to individual users utilizing beamforming.Apart from sub-6 GHz frequency bands, 5G/6G devices are also expected to cover millimeter-wave (mmWave) and terahertz (THz) spectra. However, moving to higher bands will bring new challenges and will certainly require careful consideration of the antenna design for smart devices. Compact antennas arranged as conformal, planar, and linear arrays can be employed at different portions of base stations and user equipment to form phased arrays with high gain and directional radiation beams. The objective of this Special Issue is to cover all aspects of antenna designs used in existing or future wireless communication systems. The aim is to highlight recent advances, current trends, and possible future developments of 5G/6G antennas