Autonomic Overload Management For Large-Scale Virtualized Network Functions

The explosion of data traffic in telecommunication networks has been impressive in the last few years. To keep up with the high demand and staying profitable, Telcos are embracing the Network Function Virtualization (NFV) paradigm by shifting from hardware network appliances to software virtual network functions, which are expected to support extremely large scale architectures, providing both high performance and high reliability. The main objective of this dissertation is to provide frameworks and techniques to enable proper overload detection and mitigation for the emerging virtualized software-based network services. The thesis contribution is threefold. First, it proposes a novel approach to quickly detect performance anomalies in complex and large-scale VNF services. Second, it presents NFV-Throttle, an autonomic overload control framework to protect NFV services from overload within a short period of time, allowing to preserve the QoS of traffic flows admitted by network services in response to both traffic spikes (up to 10x the available capacity) and capacity reduction due to infrastructure problems (such as CPU contention). Third, it proposes DRACO, to manage overload problems arising in novel large-scale multi-tier applications, such as complex stateful network functions in which the state is spread across modern key-value stores to achieve both scalability and performance. DRACO performs a fine-grained admission control, by tuning the amount and type of traffic according to datastore node dependencies among the tiers (which are dynamically discovered at run-time), and to the current capacity of individual nodes, in order to mitigate overloads and preventing hot-spots. This thesis presents the implementation details and an extensive experimental evaluation for all the above overload management solutions, by means of a virtualized IP Multimedia Subsystem (IMS), which provides modern multimedia services for Telco operators, such as Videoconferencing and VoLTE, and which is one of the top use-cases of the NFV technology

Graceful Degradation in IoT Security

As the consumer grade IoT devices industry advances, personal privacy is constantly eroded for the sake of convenience. Current security solutions, although available, ignore convenience by requiring the purchase of additional hardware, implementing confusing, out of scope updates for a non-technical user, or quarantining a device, rendering it useless. This paper proposes a solution that simultaneously maintains convenience and privacy, tailored for the Internet of Things. We propose a novel graceful degradation technique which targets individual device functionalities for acceptance or denial at the network level. When combined with current anomaly detection and fingerprinting methods, graceful degradation provides a personalized IoT security solution for the modern user

Detection and Mitigation of Steganographic Malware

A new attack trend concerns the use of some form of steganography and information hiding to make malware stealthier and able to elude many standard security mechanisms. Therefore, this Thesis addresses the detection and the mitigation of this class of threats. In particular, it considers malware implementing covert communications within network traffic or cloaking malicious payloads within digital images. The first research contribution of this Thesis is in the detection of network covert channels. Unfortunately, the literature on the topic lacks of real traffic traces or attack samples to perform precise tests or security assessments. Thus, a propaedeutic research activity has been devoted to develop two ad-hoc tools. The first allows to create covert channels targeting the IPv6 protocol by eavesdropping flows, whereas the second allows to embed secret data within arbitrary traffic traces that can be replayed to perform investigations in realistic conditions. This Thesis then starts with a security assessment concerning the impact of hidden network communications in production-quality scenarios. Results have been obtained by considering channels cloaking data in the most popular protocols (e.g., TLS, IPv4/v6, and ICMPv4/v6) and showcased that de-facto standard intrusion detection systems and firewalls (i.e., Snort, Suricata, and Zeek) are unable to spot this class of hazards. Since malware can conceal information (e.g., commands and configuration files) in almost every protocol, traffic feature or network element, configuring or adapting pre-existent security solutions could be not straightforward. Moreover, inspecting multiple protocols, fields or conversations at the same time could lead to performance issues. Thus, a major effort has been devoted to develop a suite based on the extended Berkeley Packet Filter (eBPF) to gain visibility over different network protocols/components and to efficiently collect various performance indicators or statistics by using a unique technology. This part of research allowed to spot the presence of network covert channels targeting the header of the IPv6 protocol or the inter-packet time of generic network conversations. In addition, the approach based on eBPF turned out to be very flexible and also allowed to reveal hidden data transfers between two processes co-located within the same host. Another important contribution of this part of the Thesis concerns the deployment of the suite in realistic scenarios and its comparison with other similar tools. Specifically, a thorough performance evaluation demonstrated that eBPF can be used to inspect traffic and reveal the presence of covert communications also when in the presence of high loads, e.g., it can sustain rates up to 3 Gbit/s with commodity hardware. To further address the problem of revealing network covert channels in realistic environments, this Thesis also investigates malware targeting traffic generated by Internet of Things devices. In this case, an incremental ensemble of autoencoders has been considered to face the ''unknown'' location of the hidden data generated by a threat covertly exchanging commands towards a remote attacker. The second research contribution of this Thesis is in the detection of malicious payloads hidden within digital images. In fact, the majority of real-world malware exploits hiding methods based on Least Significant Bit steganography and some of its variants, such as the Invoke-PSImage mechanism. Therefore, a relevant amount of research has been done to detect the presence of hidden data and classify the payload (e.g., malicious PowerShell scripts or PHP fragments). To this aim, mechanisms leveraging Deep Neural Networks (DNNs) proved to be flexible and effective since they can learn by combining raw low-level data and can be updated or retrained to consider unseen payloads or images with different features. To take into account realistic threat models, this Thesis studies malware targeting different types of images (i.e., favicons and icons) and various payloads (e.g., URLs and Ethereum addresses, as well as webshells). Obtained results showcased that DNNs can be considered a valid tool for spotting the presence of hidden contents since their detection accuracy is always above 90% also when facing ''elusion'' mechanisms such as basic obfuscation techniques or alternative encoding schemes. Lastly, when detection or classification are not possible (e.g., due to resource constraints), approaches enforcing ''sanitization'' can be applied. Thus, this Thesis also considers autoencoders able to disrupt hidden malicious contents without degrading the quality of the image

A Comprehensive Survey of Voice over IP Security Research

We present a comprehensive survey of Voice over IP security academic research, using a set of 245 publications forming a closed cross-citation set. We classify these papers according to an extended version of the VoIP Security Alliance (VoIPSA) Threat Taxonomy. Our goal is to provide a roadmap for researchers seeking to understand existing capabilities and to identify gaps in addressing the numerous threats and vulnerabilities present in VoIP systems. We discuss the implications of our findings with respect to vulnerabilities reported in a variety of VoIP products. We identify two specific problem areas (denial of service, and service abuse) as requiring significant more attention from the research community. We also find that the overwhelming majority of the surveyed work takes a black box view of VoIP systems that avoids examining their internal structure and implementation. Such an approach may miss the mark in terms of addressing the main sources of vulnerabilities, i.e., implementation bugs and misconfigurations. Finally, we argue for further work on understanding cross-protocol and cross-mechanism vulnerabilities (emergent properties), which are the byproduct of a highly complex system-of-systems and an indication of the issues in future large-scale systems

Robust Positioning in the Presence of Multipath and NLOS GNSS Signals

GNSS signals can be blocked and reflected by nearby objects, such as buildings, walls, and vehicles. They can also be reflected by the ground and by water. These effects are the dominant source of GNSS positioning errors in dense urban environments, though they can have an impact almost anywhere. Non- line-of-sight (NLOS) reception occurs when the direct path from the transmitter to the receiver is blocked and signals are received only via a reflected path. Multipath interference occurs, as the name suggests, when a signal is received via multiple paths. This can be via the direct path and one or more reflected paths, or it can be via multiple reflected paths. As their error characteristics are different, NLOS and multipath interference typically require different mitigation techniques, though some techniques are applicable to both. Antenna design and advanced receiver signal processing techniques can substantially reduce multipath errors. Unless an antenna array is used, NLOS reception has to be detected using the receiver's ranging and carrier-power-to-noise-density ratio (C/N0) measurements and mitigated within the positioning algorithm. Some NLOS mitigation techniques can also be used to combat severe multipath interference. Multipath interference, but not NLOS reception, can also be mitigated by comparing or combining code and carrier measurements, comparing ranging and C/N0 measurements from signals on different frequencies, and analyzing the time evolution of the ranging and C/N0 measurements

Robustness, Security and Privacy in Location-Based Services for Future IoT : A Survey

Internet of Things (IoT) connects sensing devices to the Internet for the purpose of exchanging information. Location information is one of the most crucial pieces of information required to achieve intelligent and context-aware IoT systems. Recently, positioning and localization functions have been realized in a large amount of IoT systems. However, security and privacy threats related to positioning in IoT have not been sufficiently addressed so far. In this paper, we survey solutions for improving the robustness, security, and privacy of location-based services in IoT systems. First, we provide an in-depth evaluation of the threats and solutions related to both global navigation satellite system (GNSS) and non-GNSS-based solutions. Second, we describe certain cryptographic solutions for security and privacy of positioning and location-based services in IoT. Finally, we discuss the state-of-the-art of policy regulations regarding security of positioning solutions and legal instruments to location data privacy in detail. This survey paper addresses a broad range of security and privacy aspects in IoT-based positioning and localization from both technical and legal points of view and aims to give insight and recommendations for future IoT systems providing more robust, secure, and privacy-preserving location-based services.Peer reviewe

Management And Security Of Multi-Cloud Applications

Single cloud management platform technology has reached maturity and is quite successful in information technology applications. Enterprises and application service providers are increasingly adopting a multi-cloud strategy to reduce the risk of cloud service provider lock-in and cloud blackouts and, at the same time, get the benefits like competitive pricing, the flexibility of resource provisioning and better points of presence. Another class of applications that are getting cloud service providers increasingly interested in is the carriers\u27 virtualized network services. However, virtualized carrier services require high levels of availability and performance and impose stringent requirements on cloud services. They necessitate the use of multi-cloud management and innovative techniques for placement and performance management. We consider two classes of distributed applications – the virtual network services and the next generation of healthcare – that would benefit immensely from deployment over multiple clouds. This thesis deals with the design and development of new processes and algorithms to enable these classes of applications. We have evolved a method for optimization of multi-cloud platforms that will pave the way for obtaining optimized placement for both classes of services. The approach that we have followed for placement itself is predictive cost optimized latency controlled virtual resource placement for both types of applications. To improve the availability of virtual network services, we have made innovative use of the machine and deep learning for developing a framework for fault detection and localization. Finally, to secure patient data flowing through the wide expanse of sensors, cloud hierarchy, virtualized network, and visualization domain, we have evolved hierarchical autoencoder models for data in motion between the IoT domain and the multi-cloud domain and within the multi-cloud hierarchy

A survey of machine learning techniques applied to self organizing cellular networks

In this paper, a survey of the literature of the past fifteen years involving Machine Learning (ML) algorithms applied to self organizing cellular networks is performed. In order for future networks to overcome the current limitations and address the issues of current cellular systems, it is clear that more intelligence needs to be deployed, so that a fully autonomous and flexible network can be enabled. This paper focuses on the learning perspective of Self Organizing Networks (SON) solutions and provides, not only an overview of the most common ML techniques encountered in cellular networks, but also manages to classify each paper in terms of its learning solution, while also giving some examples. The authors also classify each paper in terms of its self-organizing use-case and discuss how each proposed solution performed. In addition, a comparison between the most commonly found ML algorithms in terms of certain SON metrics is performed and general guidelines on when to choose each ML algorithm for each SON function are proposed. Lastly, this work also provides future research directions and new paradigms that the use of more robust and intelligent algorithms, together with data gathered by operators, can bring to the cellular networks domain and fully enable the concept of SON in the near future

A study of the applicability of software-defined networking in industrial networks

173 p.Las redes industriales interconectan sensores y actuadores para llevar a cabo funciones de monitorización, control y protección en diferentes entornos, tales como sistemas de transporte o sistemas de automatización industrial. Estos sistemas ciberfísicos generalmente están soportados por múltiples redes de datos, ya sean cableadas o inalámbricas, a las cuales demandan nuevas prestaciones, de forma que el control y gestión de tales redes deben estar acoplados a las condiciones del propio sistema industrial. De este modo, aparecen requisitos relacionados con la flexibilidad, mantenibilidad y adaptabilidad, al mismo tiempo que las restricciones de calidad de servicio no se vean afectadas. Sin embargo, las estrategias de control de red tradicionales generalmente no se adaptan eficientemente a entornos cada vez más dinámicos y heterogéneos.Tras definir un conjunto de requerimientos de red y analizar las limitaciones de las soluciones actuales, se deduce que un control provisto independientemente de los propios dispositivos de red añadiría flexibilidad a dichas redes. Por consiguiente, la presente tesis explora la aplicabilidad de las redes definidas por software (Software-Defined Networking, SDN) en sistemas de automatización industrial. Para llevar a cabo este enfoque, se ha tomado como caso de estudio las redes de automatización basadas en el estándar IEC 61850, el cual es ampliamente usado en el diseño de las redes de comunicaciones en sistemas de distribución de energía, tales como las subestaciones eléctricas. El estándar IEC 61850 define diferentes servicios y protocolos con altos requisitos en terminos de latencia y disponibilidad de la red, los cuales han de ser satisfechos mediante técnicas de ingeniería de tráfico. Como resultado, aprovechando la flexibilidad y programabilidad ofrecidas por las redes definidas por software, en esta tesis se propone una arquitectura de control basada en el protocolo OpenFlow que, incluyendo tecnologías de gestión y monitorización de red, permite establecer políticas de tráfico acorde a su prioridad y al estado de la red.Además, las subestaciones eléctricas son un ejemplo representativo de infraestructura crítica, que son aquellas en las que un fallo puede resultar en graves pérdidas económicas, daños físicos y materiales. De esta forma, tales sistemas deben ser extremadamente seguros y robustos, por lo que es conveniente la implementación de topologías redundantes que ofrezcan un tiempo de reacción ante fallos mínimo. Con tal objetivo, el estándar IEC 62439-3 define los protocolos Parallel Redundancy Protocol (PRP) y High-availability Seamless Redundancy (HSR), los cuales garantizan un tiempo de recuperación nulo en caso de fallo mediante la redundancia activa de datos en redes Ethernet. Sin embargo, la gestión de redes basadas en PRP y HSR es estática e inflexible, lo que, añadido a la reducción de ancho de banda debida la duplicación de datos, hace difícil un control eficiente de los recursos disponibles. En dicho sentido, esta tesis propone control de la redundancia basado en el paradigma SDN para un aprovechamiento eficiente de topologías malladas, al mismo tiempo que se garantiza la disponibilidad de las aplicaciones de control y monitorización. En particular, se discute cómo el protocolo OpenFlow permite a un controlador externo configurar múltiples caminos redundantes entre dispositivos con varias interfaces de red, así como en entornos inalámbricos. De esta forma, los servicios críticos pueden protegerse en situaciones de interferencia y movilidad.La evaluación de la idoneidad de las soluciones propuestas ha sido llevada a cabo, principalmente, mediante la emulación de diferentes topologías y tipos de tráfico. Igualmente, se ha estudiado analítica y experimentalmente cómo afecta a la latencia el poder reducir el número de saltos en las comunicaciones con respecto al uso de un árbol de expansión, así como balancear la carga en una red de nivel 2. Además, se ha realizado un análisis de la mejora de la eficiencia en el uso de los recursos de red y la robustez alcanzada con la combinación de los protocolos PRP y HSR con un control llevado a cabo mediante OpenFlow. Estos resultados muestran que el modelo SDN podría mejorar significativamente las prestaciones de una red industrial de misión crítica