Wavelet Packet Division Multiplexing (WPDM)-Aided Industrial WSNs

Industrial Internet-of-Things (IIoT) involve multiple groups of sensors, each group sending its observations on a particular phenomenon to a central computing platform over a multiple access channel (MAC). The central platform incorporates a decision fusion center (DFC) that arrives at global decisions regarding each set of phenomena by combining the received local sensor decisions. Owing to the diverse nature of the sensors and heterogeneous nature of the information they report, it becomes extremely challenging for the DFC to denoise the signals and arrive at multiple reliable global decisions regarding multiple phenomena. The industrial environment represents a specific indoor scenario devoid of windows and filled with different noisy electrical and measuring units. In that case, the MAC is modelled as a large-scale shadowed and slowly-faded channel corrupted with a combination of Gaussian and impulsive noise. The primary contribution of this paper is to propose a flexible, robust and highly noise-resilient multi-signal transmission framework based on Wavelet packet division multiplexing (WPDM). The local sensor observations from each group of sensors are waveform coded onto wavelet packet basis functions before reporting them over the MAC. We assume a multi-antenna DFC where the waveform-coded sensor observations can be separated by a bank of linear filters or a correlator receiver, owing to the orthogonality of the received waveforms. At the DFC we formulate and compare fusion rules for fusing received multiple sensor decisions, to arrive at reliable conclusions regarding multiple phenomena. Simulation results show that WPDM-aided wireless sensor network (WSN) for IIoT environments offer higher immunity to noise by more than 10 times over performance without WPDM in terms of probability of false detection

Interference mitigation techniques for wireless OFDM

Orthogonal Frequency Division Multiplexing (OFDM) is a promising multicarrier wireless system for transmission of high-rate data stream with spectral efficiency and fading immunity. Conventional OFDM system use efficient IFFT and FFT to multiplex the signals in parallel at the transmitter and receiver respectively. On the other hand, wavelet based OFDM system uses orthonormal wavelets which are derived from a multistage tree-structured wavelet family. The Fourier based and wavelet based OFDM systems are studied in this dissertation. Two types of QAM schemes, circular and square modulations are used to compare the performance in both OFDM systems. A new approach of determining exact BER for optimal circular QAM is proposed. In addition, the presence of narrowband interference (NBI) degrades the performance of OFDM systems. Thus, a mitigation technique is necessary to suppress NBI in an OFDM system. Recent mitigation techniques can be broadly categorized into frequency domain cancellation, receiver windowing and excision filtering. However, none of the techniques considers wavelet based OFDM. Therefore, an interference cancelation algorithm has been proposed to work for both OFDM platforms. The performance results of two OFDM schemes applicable to digital video broadcasting (DVB)-terrestrial system and under the effect of impulsive noise interference are also studied. BER performances are obtained in all results. It has been shown that wavelet based OFDM system has outperformed Fourier based OFDM system in many cases

On the Efficient Broadcasting of Heterogeneous Services over Band-Limited Channels: Unequal Power Allocation for Wavelet Packet Division Multiplexing

Multiple transmission of heterogeneous services is a central aspect of broadcasting technology. Often, in this framework, the design of efficient communication systems is complicated by stringent bandwidth constraint. In wavelet packet division multiplexing (WPDM), the message signals are waveform coded onto wavelet packet basis functions. The overlapping nature of such waveforms in both time and frequency allows improving the performance over the commonly used FDM and TDM schemes, while their orthogonality properties permit to extract the message signals by a simple correlator receiver. Furthermore, the scalable structure of WPDM makes it suitable for broadcasting heterogeneous services. This work investigates unequal error protection (UEP) of data which exhibit different sensitivities to channel errors to improve the performance of WPDM for transmission over band-limited channels. To cope with bandwidth constraint, an appropriate distribution of power among waveforms is proposed which is driven by the channel error sensitivities of the carried message signals in case of Gaussian noise. We address this problem by means of the genetic algorithms (GAs), which allow flexible suboptimal solution with reduced complexity. The mean square error (MSE) between the original and the decoded message, which has a strong correlation with subjective perception, is used as an optimization criterion

NOVEL OFDM SYSTEM BASED ON DUAL-TREE COMPLEX WAVELET TRANSFORM

The demand for higher and higher capacity in wireless networks, such as cellular, mobile and local area network etc, is driving the development of new signaling techniques with improved spectral and power efficiencies. At all stages of a transceiver, from the bandwidth efficiency of the modulation schemes through highly nonlinear power amplifier of the transmitters to the channel sharing between different users, the problems relating to power usage and spectrum are aplenty. In the coming future, orthogonal frequency division multiplexing (OFDM) technology promises to be a ready solution to achieving the high data capacity and better spectral efficiency in wireless communication systems by virtue of its well-known and desirable characteristics. Towards these ends, this dissertation investigates a novel OFDM system based on dual-tree complex wavelet transform (D

OFDM comparison with FFT and DWT processing for DVB-T2 wireless channels

Introduction− Recent studies on the FFT processing (Fast Fourier Transform) or DWT (Discrete Wavelet Transform) of the OFDM signal (Orthogonal Frequency Division Multiplexing) have shown pros and cons for DVB-T2 (Digital Video Broadcasting-Second Generation Terrestrial) radio communications; however, the benefits of both types of processing have yet to be compared for the same scenario. Objective− The objective of this research is to compare the response of the wireless channel with AWGN noise (Additive White Gaussian Noise Channel) and Rayleigh and Rician fading in the UHF (Ultra High Frequency) bandMethodology−The transmission of DVB-T2 information with OFDM modulation and FFT and DWT processing was simulated in Matlab®, specifically in Simulink. Results− The results of the study proved to be more ef-ficient for DWT system than FFT system, due to the low rate of erroneous bits, spectral efficiency and reduction of the Peak-to-Average Power Ratio (PAPR), for Eb / No relations greater than 10dB. Conclusions−In this article, we present the designs of both systems and the results of the research experience; likewise, the practical applicability of these systems is discussed, and improvements are suggested for future work.Introducción− Recientes estudios sobre el procesado FFT (Fast Fourier Transform) o DWT (Discrete Wavelet Transform) de la señal OFDM (Orthogonal Frequency Di-vision Multiplexing) han demostrado pros y contras para comunicaciones de radio DVB-T2 (Digital Video Broad-casting – Second Generation Terrestrial); sin embargo, aún falta comparar las prestaciones de ambos tipos de procesamiento para el mismo escenario. Objetivo− El objetivo de esta investigación es comparar la respuesta del canal inalámbrico con ruido AWGN (Ad-ditive White Gaussian Noise Channel) y desvanecimiento Rayleigh y Rician en la banda de UHF (Ultra High Fre-quency).Metodología− Se simuló en Matlab®, específicamente en Simulink, la transmisión de información DVB-T2 con modulación OFDM y procesado FFT y DWT. Resultados− Los resultados del estudio demostraron ser más eficientes para el sistema DWT en comparación con el Sistema FFT, por la baja tasa de bits errados, eficiencia espectral y reducción del cociente entre la potencia pico a promedio (PAPR: Peak-to-Average Power Ratio), para relaciones Eb/No mayores a 10dB. Conclusiones− En este artículo se presentan los diseños de ambos sistemas y los resultados de la experiencia de investigación; así mismo, se discute la aplicabilidad práctica de estos sistemas y se sugieren mejoras para trabajos futuros

Comparación OFDM con procesado FFT y DWT para canales inalámbricos DVB-T2

Introduction: Recent studies on the FFT processing (Fast Fourier Transform) or DWT (Discrete Wavelet Transform) of the OFDM signal (Orthogonal Frequency Division Multiplexing) have shown pros and cons for DVB-T2 (Digital Video Broadcasting-Second Generation Terrestrial) radio communications; however, the benefits of both types of processing have yet to be compared for the same scenario. Objective: The objective of this research is to compare the response of the wireless channel with AWGN noise (Additive White Gaussian Noise Channel) and Rayleigh and Rician fading in the UHF (Ultra High Frequency) band. Methodology: The transmission of DVB-T2 information with OFDM modulation and FFT and DWT processing was simulated in Matlab®, specifically in Simulink. Results: The results of the study proved to be more efficient for DWT system than FFT system, due to the low rate of erroneous bits, spectral efficiency and reduction of the Peak-to-Average Power Ratio (PAPR), for Eb / No relations greater than 10dB. Conclusions: In this article, we present the designs of both systems and the results of the research experience; likewise, the practical applicability of these systems is discussed, and improvements are suggested for future work.Introducción: Recientes estudios sobre el procesado FFT (Fast Fourier Transform) o DWT (Discrete Wavelet Transform) de la señal OFDM (Orthogonal Frequency Division Multiplexing) han demostrado pros y contras para comunicaciones de radio DVB-T2 (Digital Video Broadcasting – Second Generation Terrestrial); sin embargo, aún falta comparar las prestaciones de ambos tipos de procesamiento para el mismo escenario. Objetivo: El objetivo de esta investigación es comparar la respuesta del canal inalámbrico con ruido AWGN (Additive White Gaussian Noise Channel) y desvanecimiento Rayleigh y Rician en la banda de UHF (Ultra High Frequency). Metodología: Se simuló en Matlab®, específicamente en Simulink, la transmisión de información DVB-T2 con modulación OFDM y procesado FFT y DWT. Resultados: Los resultados del estudio demostraron ser más eficientes para el sistema DWT en comparación con el Sistema FFT, por la baja tasa de bits errados, eficiencia espectral y reducción del cociente entre la potencia pico a promedio (PAPR: Peak-to-Average Power Ratio), para relaciones Eb/No mayores a 10dB. Conclusiones: En este artículo se presentan los diseños de ambos sistemas y los resultados de la experiencia de investigación; así mismo, se discute la aplicabilidad práctica de estos sistemas y se sugieren mejoras para trabajos futuros

Doubly Orthogonal Wavelet Packets for Multi-Users Indoor Visible Light Communication Systems

Visible Light Communication (VLC) is a data communication technology that modulates the intensity of the light to transmit the information mostly by means of Light Emitting Diodes (LEDs). The data rate is mainly throttled by the limited bandwidth of the LEDs. To combat, Multi-carrier Code Division Multiple Access (MC-CDMA) is a favorable technique for achieving higher data rates along with reduced Inter-Symbol Interference (ISI) and easy access to multi-users at the cost of slightly reduced compromised spectral efficiency and Multiple Access Interference (MAI). In this article, a multi-user VLC system is designed using a Discrete Wavelet Transform (DWT) that eradicates the use of cyclic prefix due to the good orthogonality and time-frequency localization properties of wavelets. Moreover, the design also comprises suitable signature codes, which are generated by employing double orthogonality depending upon Walsh codes and Wavelet Packets. The proposed multi-user system is simulated in MATLAB software and its overall performance is assessed using line-of-sight (LoS) and non-line-of-sight (NLoS) configurations. Furthermore, two sub-optimum multi-users detection schemes such as zero forcing (ZF) and minimum-mean-square-error (MMSE) are also used at the receiver. The simulated results illustrate that the doubly orthogonal signature waveform-based DWT-MC-CDMA with MMSE detection scheme outperforms the Walsh code-based multi-user system

An Investigation of Orthogonal Wavelet Division Multiplexing Techniques as an Alternative to Orthogonal Frequency Division Multiplex Transmissions and Comparison of Wavelet Families and Their Children

Recently, issues surrounding wireless communications have risen to prominence because of the increase in the popularity of wireless applications. Bandwidth problems, and the difficulty of modulating signals across carriers, represent significant challenges. Every modulation scheme used to date has had limitations, and the use of the Discrete Fourier Transform in OFDM (Orthogonal Frequency Division Multiplex) is no exception. The restriction on further development of OFDM lies primarily within the type of transform it uses in the heart of its system, Fourier transform. OFDM suffers from sensitivity to Peak to Average Power Ratio, carrier frequency offset and wasting some bandwidth to guard successive OFDM symbols. The discovery of the wavelet transform has opened up a number of potential applications from image compression to watermarking and encryption. Very recently, work has been done to investigate the potential of using wavelet transforms within the communication space. This research will further investigate a recently proposed, innovative, modulation technique, Orthogonal Wavelet Division Multiplex, which utilises the wavelet transform opening a new avenue for an alternative modulation scheme with some interesting potential characteristics. Wavelet transform has many families and each of those families has children which each differ in filter length. This research consider comprehensively investigates the new modulation scheme, and proposes multi-level dynamic sub-banding as a tool to adapt variable signal bandwidths. Furthermore, all compactly supported wavelet families and their associated children of those families are investigated and evaluated against each other and compared with OFDM. The linear computational complexity of wavelet transform is less than the logarithmic complexity of Fourier in OFDM. The more important complexity is the operational complexity which is cost effectiveness, such as the time response of the system, the memory consumption and the number of iterative operations required for data processing. Those complexities are investigated for all available compactly supported wavelet families and their children and compared with OFDM. The evaluation reveals which wavelet families perform more effectively than OFDM, and for each wavelet family identifies which family children perform the best. Based on these results, it is concluded that the wavelet modulation scheme has some interesting advantages over OFDM, such as lower complexity and bandwidth conservation of up to 25%, due to the elimination of guard intervals and dynamic bandwidth allocation, which result in better cost effectiveness

State-of-the-art in Power Line Communications: from the Applications to the Medium

In recent decades, power line communication has attracted considerable attention from the research community and industry, as well as from regulatory and standardization bodies. In this article we provide an overview of both narrowband and broadband systems, covering potential applications, regulatory and standardization efforts and recent research advancements in channel characterization, physical layer performance, medium access and higher layer specifications and evaluations. We also identify areas of current and further study that will enable the continued success of power line communication technology.Comment: 19 pages, 12 figures. Accepted for publication, IEEE Journal on Selected Areas in Communications. Special Issue on Power Line Communications and its Integration with the Networking Ecosystem. 201