Mitigation of impulsive noise for SISO and MIMO G.fast system

To address the demand for high bandwidth data transmission over telephone transmission lines, International Telecommunication Union (ITU) has recently completed the fourth generation broadband (4GBB) copper access network technology, known as G.fast. Throughout this thesis, extensively investigates the wired broadband G.fast coding system and the novel impulsive noise reduction technique has been proposed to improve the performance of wired communications network in three different scenarios: single-line Discrete Multiple Tone (DMT)- G.fast system; a multiple input multiple-output (MIMO) DMTG.fast system, and MIMO G.fast system with different crosstalk cancellation methods. For each of these scenarios, however, Impulsive Noise (IN) is considered as the main limiting factor of performance system. In order to improve the performance of such systems, which use higher order QAM constellation such as G.fast system, this thesis examines the performance of DMT G.fast system over copper channel for six different higher signal constellations of M = 32, 128, 512, 2048, 8192 and 32768 in presence of IN modelled as the Middleton Class A (MCA) noise source. In contrast to existing work, this thesis presents and derives a novel equation of Optimal Threshold (OT) to improve the IN frequency domain mitigation methods applied to the G.fast standard over copper channel with higher QAM signal constellations. The second scenario, Multi-Line Copper Wire (MLCW) G.fast is adopted utilizing the proposed MLCW Chen model and is compared to a single line G-fast system by a comparative analysis in terms of Bit-Error-Rate(BER) performance of implementation of MLCW-DMT G.fast system. The third scenario, linear and non-linear crosstalk crosstalk interference cancellation methods are applied to MLCW G.fas and compared by a comparative analysis in terms of BER performance and the complexity of implementation.University of Technology for choosing me for their PhD scholarship and The Higher Committee For Education Development in Iraq(HCED

High Dimensional Modulation and MIMO Techniques for Access Networks

Exploration of advanced modulation formats and multiplexing techniques for next generation optical access networks are of interest as promising solutions for delivering multiple services to end-users. This thesis addresses this from two different angles: high dimensionality carrierless amplitudephase (CAP) and multiple-input multiple-output (MIMO) radio-over-fiber (RoF) systems. High dimensionality CAP modulation has been investigated in optical fiber systems. In this project we conducted the first experimental demonstration of 3 and 4 dimensional CAP with bit rates up to 10 Gb/s. These results indicate the potentiality of supporting multiple users with converged services. At the same time, orthogonal division multiple access (ODMA) systems for multiple possible dimensions of CAP modulation has been demonstrated for user and service allocation in wavelength division multiplexing (WDM) optical access network. 2 x 2 MIMO RoF employing orthogonal frequency division multiplexing (OFDM) with 5.6 GHz RoF signaling over all-vertical cavity surface emitting lasers (VCSEL) WDM passive optical networks (PONs). We have employed polarization division multiplexing (PDM) to further increase the capacity per wavelength of the femto-cell network. Bit rate up to 1.59 Gbps with fiber-wireless transmission over 1 m air distance is demonstrated. The results presented in this thesis demonstrate the feasibility of high dimensionality CAP in increasing the number of dimensions and their potentially to be utilized for multiple service allocation to different users. MIMO multiplexing techniques with OFDM provides the scalability in increasing spectral effciency and bit rates for RoF systems. High dimensional CAP and MIMO multiplexing techniques are two promising solutions for supporting wired and hybrid wired-wireless access networks

Multi-Antenna Techniques for Next Generation Cellular Communications

Future cellular communications are expected to offer substantial improvements for the pre- existing mobile services with higher data rates and lower latency as well as pioneer new types of applications that must comply with strict demands from a wider range of user types. All of these tasks require utmost efficiency in the use of spectral resources. Deploying multiple antennas introduces an additional signal dimension to wireless data transmissions, which provides a significant alternative solution against the plateauing capacity issue of the limited available spectrum. Multi-antenna techniques and the associated key enabling technologies possess unquestionable potential to play a key role in the evolution of next generation cellular systems. Spectral efficiency can be improved on downlink by concurrently serving multiple users with high-rate data connections on shared resources. In this thesis optimized multi-user multi-input multi-output (MIMO) transmissions are investigated on downlink from both filter design and resource allocation/assignment points of view. Regarding filter design, a joint baseband processing method is proposed specifically for high signal-to-noise ratio (SNR) conditions, where the necessary signaling overhead can be compensated for. Regarding resource scheduling, greedy- and genetic-based algorithms are proposed that demand lower complexity with large number of resource blocks relative to prior implementations. Channel estimation techniques are investigated for massive MIMO technology. In case of channel reciprocity, this thesis proposes an overhead reduction scheme for the signaling of user channel state information (CSI) feedback during a relative antenna calibration. In addition, a multi-cell coordination method is proposed for subspace-based blind estimators on uplink, which can be implicitly translated to downlink CSI in the presence of ideal reciprocity. Regarding non-reciprocal channels, a novel estimation technique is proposed based on reconstructing full downlink CSI from a select number of dominant propagation paths. The proposed method offers drastic compressions in user feedback reports and requires much simpler downlink training processes. Full-duplex technology can provide up to twice the spectral efficiency of conventional resource divisions. This thesis considers a full-duplex two-hop link with a MIMO relay and investigates mitigation techniques against the inherent loop-interference. Spatial-domain suppression schemes are developed for the optimization of full-duplex MIMO relaying in a coverage extension scenario on downlink. The proposed methods are demonstrated to generate data rates that closely approximate their global bounds

Multi-Layer Ultra-Wideband Wilkinson Combiner for Arrays

This work investigates an ultra-wideband (UWB), compact, and multilayer Wilkinson power combiners for tightly coupled array (TCA) designs. The Wilkinson topology designs encompass UHF, L-, and S-bands. These combiners integrate into an experimental UWB TCA. The experimental UWB TCA divides into twenty-four columns, with each column containing eight unit cells, and each cell one-inch square. The Wilkinson power combiner contains eight input ports and one output port. Twenty-four combiners mount to the TCA’s back. The combiner condenses the two-dimensional array (8x24) to a one-dimensional or linear array (1x24). The proposed Wilkinson power combiner possesses a multilayer design reducing common mode current problems caused by vias. The Wilkinson combiner covers 500 MHz to 3.28 GHz and provides a 6.56:1 bandwidth. It achieves tight impedance matching through stripline coupling. The proposed design provides minimal phase error, equal power reception, and low power handling. The power combiner interfaces with an experimental UWB TCA antenna through SMP snap connectors. This paper examines signal combining efficiency to provide minimum path loss. This paper also examines interconnecting transmission lines traversing multiple laminate layers. This necessitates proper current handling because interconnects influence impedance, transmission, and isolation. Integrating a via picket fence improves port isolation and reduces propagating parallel plate modes. The proposed combiner design achieved the following important attributes at or better than the minimum required specifications. The measured combiner design successfully demonstrated -7.8dB minimum return loss for input and -18.1dB return loss for the outputs; 10.92dB ± 1.28dB insertion loss; -12.2db minimum isolation; ± 1.38° minimal phase error; ± 0.57dB power reception imbalance. The proposed UWB combiner design condensed the four-stage Wilkinson footprint to consume no more than 0.4in² (258mm²) surface area, weighed only 1.5oz (42.5g), and less than a half-inch thick

Next generation optical access networks and coexistence with legacy PONs

Nowadays, Fiber-to-the-Home is one of the most promising solutions to provide broadband services in access networks. However, the fiber is inefficiently used as most of the deployed systems are still based on Time Division Multiplexing Passive Optical Networks (TDM-PONs) providing shared transmission capacities up to 2.5 Gb/s down and 1.25 Gb/s up, among multiple users. Research on high-speed electronics and Wavelength Division Multiplexing (WDM) has allowed the emergence of what is known as the second generation PON (NG-PON2), which specify aggregated capacities up to 40 Gb/s, stacking four channels at symmetric data rates of 10 Gb/s each, for residential scenarios. Nevertheless, the capacity per channel is still shared between multiple users due to the use of TDM. Moreover, the optical spectrum efficiency is low because channels are widely spaced (50 to 100 GHz). In addition, the sensitivity, reach and number of users is limited as consequence of using direct detection (DD) systems. In consequence, and due to the increase in bandwidth demands of new multimedia applications, it is necessary to propose solutions that cope with this tendency and, even more important, that can coexist with legacy systems, being one of the major requirements of network operators to guarantee a smooth and non-disruptive technology migration. In this thesis, a breakthrough technology such as Ultra-Dense WDM (UDWDM) that allows to allocate a large number of channels spaced only by a few GHz is used. This approach consent to envision the concept of Wavelength-to-the-User, where each costumer can be served with dedicated bandwidth links. The key technologies are based on coherent systems, with inherent wavelength selectivity and improved sensitivity compared to DD systems, thanks to the booster action of a tunable local oscillator (LO) laser. Because of cost is the main constraint in access networks, especially at the customer premises equipment (Optical Network Unit - ONU), in this thesis, a new class of coherent transceivers, based on low-cost direct modulated lasers and simplified receiver schemes, are proposed and experimentally tested. Moreover, the issue of coexistence is investigated through theoretical studies and real-time implementations, demonstrating full compatibility with legacy systems. Between the proposed solutions, a simple technique to adjust digitally the direct phase modulation of a distributed feedback (DFB) laser is presented to support flexible transmission rates. Next, several multilevel phase modulation formats for achieving higher transmission rates and better spectral efficiency are experimentally compared. Subsequently, the topic of photonic integration is addressed, demonstrating for the first time an 8-ary hybrid amplitude and phase modulated transmitter (Tx), by using a low-cost, small-footprint and energy efficient dual electro-absorption modulated laser (DEML). Finally, two novel proposals, to reduce the complexity of heterodyne and intradyne detection, are provided to face the typical issue of complexity and high-cost of coherent systems. The former explores the possibility of using only one DFB laser as LO and Tx at the ONU. The later demonstrates for the first time, a novel phase time diversity technique alternating phase modulation at each complex component (in-phase - I and quadrature - Q) achieving a 10 Gb/s' transmission with polarization independence.En la actualidad, la Fibra hasta el Hogar es una de las soluciones más prometedoras para proporcionar servicios de banda ancha en las redes de acceso. Sin embargo, la fibra se usa de manera poco eficiente, ya que la mayoría de los sistemas implementados todavía están basados en redes ópticas pasivas de multiplexación por división en el tiempo (TDM-PON) que brindan capacidades de transmisión compartidas entre múltiples usuarios de hasta 2.5 Gb/s y 1.25 Gb/s. La investigación en electrónica de alta velocidad y la multiplexación por división de longitud de onda (WDM) ha permitido el surgimiento de lo hoy se conoce como PON de segunda generación (NG-PON2), que especifica capacidades agregadas de hasta 40 Gb/s, apilando cuatro canales a velocidades de datos simétricas de 10 Gb/s cada uno, para escenarios residenciales. Sin embargo, la capacidad por canal todavía se comparte entre múltiples usuarios debido al uso de TDM. Además, la eficiencia en el uso del espectro óptico es baja porque los canales están muy separados (50 a 100 GHz). Asimismo, la sensibilidad, el alcance y el número de usuarios están limitados debido al uso de sistemas de detección directa. En consecuencia, y debido al aumento de las demandas de ancho de banda de las nuevas aplicaciones multimedia, es necesario proponer soluciones que respondan a esta tendencia y, lo que es más importante, que puedan coexistir con sistemas heredados, siendo uno de los principales requisitos de los operadores de red para garantizar una migración de tecnología fluida y sin interrupciones. En esta tesis, se utiliza una tecnología de vanguardia, como la multiplexación por división ultra densa de longitud de onda (UDWDM) que permite distribuir un gran número de canales espaciados solo por unos pocos GHz. Este enfoque permite vislumbrar el concepto de longitud de onda para el usuario, donde cada cliente puede usar enlaces de ancho de banda dedicados. Las tecnologías clave están basadas en los sistemas coherentes, con selectividad de longitud de onda inherente y sensibilidad mejorada en comparación con los sistemas de detección directa, gracias al efecto de amplificación óptica de un láser oscilador local (LO) sintonizable. Debido a que el costo es la principal restricción en las redes de acceso, especialmente del equipo en las instalaciones del cliente (unidad de red óptica - ONU), en ésta tesis, una nueva clase de transceptores coherentes, basados en láseres de bajo coste modulados directamente y esquemas de recepción simplificados, son propuestos y probados experimentalmente. Además, el problema de la coexistencia es investigado a través de estudios teóricos y experimentos en tiempo real, demostrando compatibilidad total con los sistemas heredados. Entre las soluciones propuestas, se presenta una técnica simple para ajustar digitalmente la modulación de fase directa de un láser de retroalimentación distribuida (DFB), y admitir velocidades de transmisión flexibles. Acto seguido, se comparan experimentalmente varios formatos multinivel de modulación de fase, para lograr tasas de transmisión más altas y una mejor eficiencia espectral. Posteriormente, se aborda el tema de la integración fotónica, demostrando por primera vez un transmisor (Tx) con modulación híbrida de fase y amplitud de ocho puntos, mediante el uso de un dispositivo pequeño, de bajo coste y eficiente energéticamente, como lo es el láser dual de electro-absorción modulada (DEML). Finalmente, se presentan dos propuestas novedosas para reducir la complejidad de la detección heterodina e intradina, afrontando el problema típico de la complejidad y alto coste de los sistemas coherentes. La primera explora la posibilidad de usar solo un láser DFB en la ONU, como LO y Tx. La segunda, demuestra por primera vez, una nueva técnica de diversidad fase en el tiempo, que alterna la modulación de fase en cada componente del plano complejo (fase-I y cuadratura-Q) logrando una transmisión de 10 Gb / s / λ con independencia de polarizació

Next generation optical access networks and coexistence with legacy PONs

Nowadays, Fiber-to-the-Home is one of the most promising solutions to provide broadband services in access networks. However, the fiber is inefficiently used as most of the deployed systems are still based on Time Division Multiplexing Passive Optical Networks (TDM-PONs) providing shared transmission capacities up to 2.5 Gb/s down and 1.25 Gb/s up, among multiple users. Research on high-speed electronics and Wavelength Division Multiplexing (WDM) has allowed the emergence of what is known as the second generation PON (NG-PON2), which specify aggregated capacities up to 40 Gb/s, stacking four channels at symmetric data rates of 10 Gb/s each, for residential scenarios. Nevertheless, the capacity per channel is still shared between multiple users due to the use of TDM. Moreover, the optical spectrum efficiency is low because channels are widely spaced (50 to 100 GHz). In addition, the sensitivity, reach and number of users is limited as consequence of using direct detection (DD) systems. In consequence, and due to the increase in bandwidth demands of new multimedia applications, it is necessary to propose solutions that cope with this tendency and, even more important, that can coexist with legacy systems, being one of the major requirements of network operators to guarantee a smooth and non-disruptive technology migration. In this thesis, a breakthrough technology such as Ultra-Dense WDM (UDWDM) that allows to allocate a large number of channels spaced only by a few GHz is used. This approach consent to envision the concept of Wavelength-to-the-User, where each costumer can be served with dedicated bandwidth links. The key technologies are based on coherent systems, with inherent wavelength selectivity and improved sensitivity compared to DD systems, thanks to the booster action of a tunable local oscillator (LO) laser. Because of cost is the main constraint in access networks, especially at the customer premises equipment (Optical Network Unit - ONU), in this thesis, a new class of coherent transceivers, based on low-cost direct modulated lasers and simplified receiver schemes, are proposed and experimentally tested. Moreover, the issue of coexistence is investigated through theoretical studies and real-time implementations, demonstrating full compatibility with legacy systems. Between the proposed solutions, a simple technique to adjust digitally the direct phase modulation of a distributed feedback (DFB) laser is presented to support flexible transmission rates. Next, several multilevel phase modulation formats for achieving higher transmission rates and better spectral efficiency are experimentally compared. Subsequently, the topic of photonic integration is addressed, demonstrating for the first time an 8-ary hybrid amplitude and phase modulated transmitter (Tx), by using a low-cost, small-footprint and energy efficient dual electro-absorption modulated laser (DEML). Finally, two novel proposals, to reduce the complexity of heterodyne and intradyne detection, are provided to face the typical issue of complexity and high-cost of coherent systems. The former explores the possibility of using only one DFB laser as LO and Tx at the ONU. The later demonstrates for the first time, a novel phase time diversity technique alternating phase modulation at each complex component (in-phase - I and quadrature - Q) achieving a 10 Gb/s' transmission with polarization independence.En la actualidad, la Fibra hasta el Hogar es una de las soluciones más prometedoras para proporcionar servicios de banda ancha en las redes de acceso. Sin embargo, la fibra se usa de manera poco eficiente, ya que la mayoría de los sistemas implementados todavía están basados en redes ópticas pasivas de multiplexación por división en el tiempo (TDM-PON) que brindan capacidades de transmisión compartidas entre múltiples usuarios de hasta 2.5 Gb/s y 1.25 Gb/s. La investigación en electrónica de alta velocidad y la multiplexación por división de longitud de onda (WDM) ha permitido el surgimiento de lo hoy se conoce como PON de segunda generación (NG-PON2), que especifica capacidades agregadas de hasta 40 Gb/s, apilando cuatro canales a velocidades de datos simétricas de 10 Gb/s cada uno, para escenarios residenciales. Sin embargo, la capacidad por canal todavía se comparte entre múltiples usuarios debido al uso de TDM. Además, la eficiencia en el uso del espectro óptico es baja porque los canales están muy separados (50 a 100 GHz). Asimismo, la sensibilidad, el alcance y el número de usuarios están limitados debido al uso de sistemas de detección directa. En consecuencia, y debido al aumento de las demandas de ancho de banda de las nuevas aplicaciones multimedia, es necesario proponer soluciones que respondan a esta tendencia y, lo que es más importante, que puedan coexistir con sistemas heredados, siendo uno de los principales requisitos de los operadores de red para garantizar una migración de tecnología fluida y sin interrupciones. En esta tesis, se utiliza una tecnología de vanguardia, como la multiplexación por división ultra densa de longitud de onda (UDWDM) que permite distribuir un gran número de canales espaciados solo por unos pocos GHz. Este enfoque permite vislumbrar el concepto de longitud de onda para el usuario, donde cada cliente puede usar enlaces de ancho de banda dedicados. Las tecnologías clave están basadas en los sistemas coherentes, con selectividad de longitud de onda inherente y sensibilidad mejorada en comparación con los sistemas de detección directa, gracias al efecto de amplificación óptica de un láser oscilador local (LO) sintonizable. Debido a que el costo es la principal restricción en las redes de acceso, especialmente del equipo en las instalaciones del cliente (unidad de red óptica - ONU), en ésta tesis, una nueva clase de transceptores coherentes, basados en láseres de bajo coste modulados directamente y esquemas de recepción simplificados, son propuestos y probados experimentalmente. Además, el problema de la coexistencia es investigado a través de estudios teóricos y experimentos en tiempo real, demostrando compatibilidad total con los sistemas heredados. Entre las soluciones propuestas, se presenta una técnica simple para ajustar digitalmente la modulación de fase directa de un láser de retroalimentación distribuida (DFB), y admitir velocidades de transmisión flexibles. Acto seguido, se comparan experimentalmente varios formatos multinivel de modulación de fase, para lograr tasas de transmisión más altas y una mejor eficiencia espectral. Posteriormente, se aborda el tema de la integración fotónica, demostrando por primera vez un transmisor (Tx) con modulación híbrida de fase y amplitud de ocho puntos, mediante el uso de un dispositivo pequeño, de bajo coste y eficiente energéticamente, como lo es el láser dual de electro-absorción modulada (DEML). Finalmente, se presentan dos propuestas novedosas para reducir la complejidad de la detección heterodina e intradina, afrontando el problema típico de la complejidad y alto coste de los sistemas coherentes. La primera explora la posibilidad de usar solo un láser DFB en la ONU, como LO y Tx. La segunda, demuestra por primera vez, una nueva técnica de diversidad fase en el tiempo, que alterna la modulación de fase en cada componente del plano complejo (fase-I y cuadratura-Q) logrando una transmisión de 10 Gb / s / λ con independencia de polarizaciónPostprint (published version

Electromagnetic Interference and Compatibility

Recent progress in the fields of Electrical and Electronic Engineering has created new application scenarios and new Electromagnetic Compatibility (EMC) challenges, along with novel tools and methodologies to address them. This volume, which collects the contributions published in the “Electromagnetic Interference and Compatibility” Special Issue of MDPI Electronics, provides a vivid picture of current research trends and new developments in the rapidly evolving, broad area of EMC, including contributions on EMC issues in digital communications, power electronics, and analog integrated circuits and sensors, along with signal and power integrity and electromagnetic interference (EMI) suppression properties of materials

Optical Wireless Data Center Networks

Bandwidth and computation-intensive Big Data applications in disciplines like social media, bio- and nano-informatics, Internet-of-Things (IoT), and real-time analytics, are pushing existing access and core (backbone) networks as well as Data Center Networks (DCNs) to their limits. Next generation DCNs must support continuously increasing network traffic while satisfying minimum performance requirements of latency, reliability, flexibility and scalability. Therefore, a larger number of cables (i.e., copper-cables and fiber optics) may be required in conventional wired DCNs. In addition to limiting the possible topologies, large number of cables may result into design and development problems related to wire ducting and maintenance, heat dissipation, and power consumption. To address the cabling complexity in wired DCNs, we propose OWCells, a class of optical wireless cellular data center network architectures in which fixed line of sight (LOS) optical wireless communication (OWC) links are used to connect the racks arranged in regular polygonal topologies. We present the OWCell DCN architecture, develop its theoretical underpinnings, and investigate routing protocols and OWC transceiver design. To realize a fully wireless DCN, servers in racks must also be connected using OWC links. There is, however, a difficulty of connecting multiple adjacent network components, such as servers in a rack, using point-to-point LOS links. To overcome this problem, we propose and validate the feasibility of an FSO-Bus to connect multiple adjacent network components using NLOS point-to-point OWC links. Finally, to complete the design of the OWC transceiver, we develop a new class of strictly and rearrangeably non-blocking multicast optical switches in which multicast is performed efficiently at the physical optical (lower) layer rather than upper layers (e.g., application layer). Advisors: Jitender S. Deogun and Dennis R. Alexande

A Novel Power-Efficient Wireless Multi-channel Recording System for the Telemonitoring of Electroencephalography (EEG)

This research introduces the development of a novel EEG recording system that is modular, batteryless, and wireless (untethered) with the supporting theoretical foundation in wireless communications and related design elements and circuitry. Its modular construct overcomes the EEG scaling problem and makes it easier for reconfiguring the hardware design in terms of the number and placement of electrodes and type of standard EEG system contemplated for use. In this development, portability, lightweight, and applicability to other clinical applications that rely on EEG data are sought. Due to printer tolerance, the 3D printed cap consists of 61 electrode placements. This recording capacity can however extend from 21 (as in the international 10-20 systems) up to 61 EEG channels at sample rates ranging from 250 to 1000 Hz and the transfer of the raw EEG signal using a standard allocated frequency as a data carrier. The main objectives of this dissertation are to (1) eliminate the need for heavy mounted batteries, (2) overcome the requirement for bulky power systems, and (3) avoid the use of data cables to untether the EEG system from the subject for a more practical and less restrictive setting. Unpredictability and temporal variations of the EEG input make developing a battery-free and cable-free EEG reading device challenging. Professional high-quality and high-resolution analog front ends are required to capture non-stationary EEG signals at microvolt levels. The primary components of the proposed setup are the wireless power transmission unit, which consists of a power amplifier, highly efficient resonant-inductive link, rectification, regulation, and power management units, as well as the analog front end, which consists of an analog to digital converter, pre-amplification unit, filtering unit, host microprocessor, and the wireless communication unit. These must all be compatible with the rest of the system and must use the least amount of power possible while minimizing the presence of noise and the attenuation of the recorded signal A highly efficient resonant-inductive coupling link is developed to decrease power transmission dissipation. Magnetized materials were utilized to steer electromagnetic flux and decrease route and medium loss while transmitting the required energy with low dissipation. Signal pre-amplification is handled by the front-end active electrodes. Standard bio-amplifier design approaches are combined to accomplish this purpose, and a thorough investigation of the optimum ADC, microcontroller, and transceiver units has been carried out. We can minimize overall system weight and power consumption by employing battery-less and cable-free EEG readout system designs, consequently giving patients more comfort and freedom of movement. Similarly, the solutions are designed to match the performance of medical-grade equipment. The captured electrical impulses using the proposed setup can be stored for various uses, including classification, prediction, 3D source localization, and for monitoring and diagnosing different brain disorders. All the proposed designs and supporting mathematical derivations were validated through empirical and software-simulated experiments. Many of the proposed designs, including the 3D head cap, the wireless power transmission unit, and the pre-amplification unit, are already fabricated, and the schematic circuits and simulation results were based on Spice, Altium, and high-frequency structure simulator (HFSS) software. The fully integrated head cap to be fabricated would require embedding the active electrodes into the 3D headset and applying current technological advances to miniaturize some of the design elements developed in this dissertation