1,153 research outputs found
Implementation and Evaluation of a Cooperative Vehicle-to-Pedestrian Safety Application
While the development of Vehicle-to-Vehicle (V2V) safety applications based
on Dedicated Short-Range Communications (DSRC) has been extensively undergoing
standardization for more than a decade, such applications are extremely missing
for Vulnerable Road Users (VRUs). Nonexistence of collaborative systems between
VRUs and vehicles was the main reason for this lack of attention. Recent
developments in Wi-Fi Direct and DSRC-enabled smartphones are changing this
perspective. Leveraging the existing V2V platforms, we propose a new framework
using a DSRC-enabled smartphone to extend safety benefits to VRUs. The
interoperability of applications between vehicles and portable DSRC enabled
devices is achieved through the SAE J2735 Personal Safety Message (PSM).
However, considering the fact that VRU movement dynamics, response times, and
crash scenarios are fundamentally different from vehicles, a specific framework
should be designed for VRU safety applications to study their performance. In
this article, we first propose an end-to-end Vehicle-to-Pedestrian (V2P)
framework to provide situational awareness and hazard detection based on the
most common and injury-prone crash scenarios. The details of our VRU safety
module, including target classification and collision detection algorithms, are
explained next. Furthermore, we propose and evaluate a mitigating solution for
congestion and power consumption issues in such systems. Finally, the whole
system is implemented and analyzed for realistic crash scenarios
Multi-mode Tracking of a Group of Mobile Agents
We consider the problem of tracking a group of mobile nodes with limited
available computational and energy resources given noisy RSSI measurements and
position estimates from group members. The multilateration solutions are known
for energy efficiency. However, these solutions are not directly applicable to
dynamic grouping scenarios where neighbourhoods and resource availability may
frequently change. Existing algorithms such as cluster-based GPS duty-cycling,
individual-based tracking, and multilateration-based tracking can only
partially deal with the challenges of dynamic grouping scenarios. To cope with
these challenges in an effective manner, we propose a new group-based
multi-mode tracking algorithm. The proposed algorithm takes the topological
structure of the group as well as the availability of the resources into
consideration and decides the best solution at any particular time instance. We
consider a clustering approach where a cluster head coordinates the usage of
resources among the cluster members. We evaluate the energy-accuracy trade-off
of the proposed algorithm for various fixed sampling intervals. The evaluation
is based on the 2D position tracks of 40 nodes generated using Reynolds'
flocking model. For a given energy budget, the proposed algorithm reduces the
mean tracking error by up to in comparison to the existing
energy-efficient cooperative algorithms. Moreover, the proposed algorithm is as
accurate as the individual-based tracking while using almost half the energy.Comment: Accepted for publication in the 20th international symposium on
wireless personal multimedia communications (WPMC-2017
Collaborative navigation as a solution for PNT applications in GNSS challenged environments: report on field trials of a joint FIG / IAG working group
PNT stands for Positioning, Navigation, and Timing. Space-based PNT refers to the capabilities enabled by GNSS, and enhanced by Ground and Space-based Augmentation Systems (GBAS and SBAS), which provide position, velocity, and timing information to an unlimited number of users around the world, allowing every user to operate in the same reference system and timing standard. Such information has become increasingly critical to the security, safety, prosperity, and overall qualityof-life of many citizens. As a result, space-based PNT is now widely recognized as an essential element of the global information infrastructure. This paper discusses the importance of the availability and continuity of PNT information, whose application, scope and significance have exploded in the past 10–15 years. A paradigm shift in the navigation solution has been observed in recent years. It has been manifested by an evolution from traditional single sensor-based solutions, to multiple sensor-based solutions and ultimately to collaborative navigation and layered sensing, using non-traditional sensors and techniques – so called signals of opportunity. A joint working group under the auspices of the International Federation of Surveyors (FIG) and the International Association of Geodesy (IAG), entitled ‘Ubiquitous Positioning Systems’ investigated the use of Collaborative Positioning (CP) through several field trials over the past four years. In this paper, the concept of CP is discussed in detail and selected results of these experiments are presented. It is demonstrated here, that CP is a viable solution if a ‘network’ or ‘neighbourhood’ of users is to be positioned / navigated together, as it increases the accuracy, integrity, availability, and continuity of the PNT information for all users
Opportunistic Localization Scheme Based on Linear Matrix Inequality
Enabling self-localization of mobile nodes is an important problem that has been widely studied in the literature.
The general conclusions is that an accurate localization
requires either sophisticated hardware (GPS, UWB, ultrasounds transceiver) or a dedicated infrastructure (GSM, WLAN). In this paper we tackle the problem from a different and rather new perspective: we investigate how localization performance can be improved by means of a cooperative and opportunistic data exchange among the nodes. We consider a target node, completely unaware of its own position, and a number of mobile nodes with some self-localization capabilities. When the opportunity occurs, the target node can exchange data with in-range mobile nodes. This opportunistic data exchange is then used by the target node to refine its position estimate by using a technique based on Linear Matrix Inequalities and barycentric algorithm. To investigate the performance of such an opportunistic localization algorithm, we define a simple mathematical model that describes the opportunistic interactions and, then, we run several computer simulations for analyzing the effect of the nodes duty-cycle and of the native self-localization error modeling considered. The results show that the opportunistic interactions can actually improve the self-localization accuracy of a strayed node in many different scenarios
Cooperative localization by dual foot-mounted inertial sensors and inter-agent ranging
The implementation challenges of cooperative localization by dual
foot-mounted inertial sensors and inter-agent ranging are discussed and work on
the subject is reviewed. System architecture and sensor fusion are identified
as key challenges. A partially decentralized system architecture based on
step-wise inertial navigation and step-wise dead reckoning is presented. This
architecture is argued to reduce the computational cost and required
communication bandwidth by around two orders of magnitude while only giving
negligible information loss in comparison with a naive centralized
implementation. This makes a joint global state estimation feasible for up to a
platoon-sized group of agents. Furthermore, robust and low-cost sensor fusion
for the considered setup, based on state space transformation and
marginalization, is presented. The transformation and marginalization are used
to give the necessary flexibility for presented sampling based updates for the
inter-agent ranging and ranging free fusion of the two feet of an individual
agent. Finally, characteristics of the suggested implementation are
demonstrated with simulations and a real-time system implementation.Comment: 14 page
Multisensor navigation systems: a remedy for GNSS vulnerabilities?
Space-based positioning, navigation, and timing (PNT) technologies, such as the global navigation satellite systems (GNSS) provide position, velocity, and timing information to an unlimited number of users around the world. In recent years, PNT information has become increasingly critical to the security, safety, and prosperity of the World's population, and is now widely recognized as an essential element of the global information infrastructure. Due to its vulnerabilities and line-of-sight requirements, GNSS alone is unable to provide PNT with the required levels of integrity, accuracy, continuity, and reliability. A multisensor navigation approach offers an effective augmentation in GNSS-challenged environments that holds a promise of delivering robust and resilient PNT. Traditionally, sensors such as inertial measurement units (IMUs), barometers, magnetometers, odometers, and digital compasses, have been used. However, recent trends have largely focused on image-based, terrain-based and collaborative navigation to recover the user location. This paper offers a review of the technological advances that have taken place in PNT over the last two decades, and discusses various hybridizations of multisensory systems, building upon the fundamental GNSS/IMU integration. The most important conclusion of this study is that in order to meet the challenging goals of delivering continuous, accurate and robust PNT to the ever-growing numbers of users, the hybridization of a suite of different PNT solutions is required
Vehicular Networks and Outdoor Pedestrian Localization
This thesis focuses on vehicular networks and outdoor pedestrian localization. In particular, it targets secure positioning in vehicular networks and pedestrian localization for safety services in outdoor environments.
The former research topic must cope with three major challenges, concerning users’ privacy, computational costs of security and the system trust on user correctness. This thesis addresses those issues by proposing a new lightweight privacy-preserving framework for continuous tracking of vehicles. The proposed solution is evaluated in both dense and sparse vehicular settings through simulation and experiments in real-world testbeds. In addition, this thesis explores the benefit given by the use of low frequency bands for the transmission of control messages in vehicular networks.
The latter topic is motivated by a significant number of traffic accidents with pedestrians distracted by their smartphones. This thesis proposes two different localization solutions specifically for pedestrian safety: a GPS-based approach and a shoe-mounted inertial sensor method. The GPS-based solution is more suitable for rural and suburban areas while it is not applicable in dense urban environments, due to large positioning errors. Instead the inertial sensor approach overcomes the limitations of previous technique in urban environments. Indeed, by exploiting accelerometer data, this architecture is able to precisely detect the transitions from safe to potentially unsafe walking locations without the need of any absolute positioning systems
Motorcycle detection for ADAS through camera and V2V communication, a comparative analysis of two modern technologies
Motorcycles are one of the most dangerous means of transportation. Its death toll is higher than in others, due to the inherent vulnerability of motorcycle drivers. The latest strategies in Advanced Driving Assistance Systems (ADAS) are trying to mitigate this problem by applying the advances of modern technologies to the road transport. This paper presents two different approaches on motorcycle protection, based on two of the most modern available technologies in ADAS, i.e. Computer Vision and Vehicle to Vehicle Communication (V2V). The first approach is based on data fusion of Laser Scanner and Computer Vision, providing accurate obstacle detection and localization based on laser scanner, and obstacle classification using computer vision and laser. The second approach is based on ad-hoc V2V technology and provides detection in case of occlusion for visual sensors. Both technologies have been tested in the presented work, and a performance comparison is given. Tests performed in different driving situations allows to measure the performance of every algorithm and the limitations of each of them based on empirical and scientific foundations. The conclusions of the presented work help foster of expert systems in the automotive sector by providing further discussion of the viability and impact from each of these systems in real scenarios
- …