FirstLight: Pluggable Optical Interconnect Technologies for Polymeric Electro-Optical Printed Circuit Boards in Data Centers

The protocol data rate governing data storage devices will increase to over 12 Gb/s by 2013 thereby imposing unmanageable cost and performance burdens on future digital data storage systems. The resulting performance bottleneck can be substantially reduced by conveying high-speed data optically instead of electronically. A novel active pluggable 82.5 Gb/s aggregate bit rate optical connector technology, the design and fabrication of a compact electro-optical printed circuit board to meet exacting specifications, and a method for low cost, high precision, passive optical assembly are presented. A demonstration platform was constructed to assess the viability of embedded electro-optical midplane technology in such systems including the first ever demonstration of a pluggable active optical waveguide printed circuit board connector. High-speed optical data transfer at 10.3125 Gb/s was demonstrated through a complex polymer waveguide interconnect layer embedded into a 262 mm × 240 mm × 4.3 mm electro-optical midplane. Bit error rates of less than 10-12 and optical losses as low as 6 dB were demonstrated through nine multimode polymer wave guides with an aggregate data bandwidth of 92.8125 Gb/s

FirstLight: Pluggable Optical Interconnect Technologies for Polymeric Electro-Optical Printed Circuit Boards in Data Centers

The protocol data rate governing data storage devices will increase to over 12 Gb/s by 2013 thereby imposing unmanageable cost and performance burdens on future digital data storage systems. The resulting performance bottleneck can be substantially reduced by conveying high-speed data optically instead of electronically. A novel active pluggable 82.5 Gb/s aggregate bit rate optical connector technology, the design and fabrication of a compact electro-optical printed circuit board to meet exacting specifications, and a method for low cost, high precision, passive optical assembly are presented. A demonstration platform was constructed to assess the viability of embedded electro-optical midplane technology in such systems including the first ever demonstration of a pluggable active optical waveguide printed circuit board connector. High-speed optical data transfer at 10.3125 Gb/s was demonstrated through a complex polymer waveguide interconnect layer embedded into a 262 mm × 240 mm × 4.3 mm electro-optical midplane. Bit error rates of less than 10-12 and optical losses as low as 6 dB were demonstrated through nine multimode polymer wave guides with an aggregate data bandwidth of 92.8125 Gb/s

Introduction to the special section on dependable network computing

Dependable network computing is becoming a key part of our daily economic and social life. Every day, millions of users and businesses are utilizing the Internet infrastructure for real-time electronic commerce transactions, scheduling important events, and building relationships. While network traffic and the number of users are rapidly growing, the mean-time between failures (MTTF) is surprisingly short; according to recent studies, in the majority of Internet backbone paths, the MTTF is 28 days. This leads to a strong requirement for highly dependable networks, servers, and software systems. The challenge is to build interconnected systems, based on available technology, that are inexpensive, accessible, scalable, and dependable. This special section provides insights into a number of these exciting challenges

Storage Area Networks

This tutorial compares Storage area Network (SAN) technology with previous storage management solutions with particular attention to promised benefits of scalability, interoperability, and high-speed LAN-free backups. The paper provides an overview of what SANs are, why invest in them, and how SANs can be managed. The paper also discusses a primary management concern, the interoperability of vendor-specific SAN solutions. Bluefin, a storage management interface and interoperability solution is also explained. The paper concludes with discussion of SAN-related trends and implications for practice and research

Electronic and photonic switching in the atm era

Broadband networks require high-capacity switches in order to properly manage large amounts of traffic fluxes. Electronic and photonic technologies are being used to achieve this objective both allowing different multiplexing and switching techniques. Focusing on the asynchronous transfer mode (ATM), the inherent different characteristics of electronics and photonics makes different architectures feasible. In this paper, different switching structures are described, several ATM switching architectures which have been recently implemented are presented and the implementation characteristics discussed. Three diverse points of view are given from the electronic research, the photonic research and the commercial switches. Although all the architectures where successfully tested, they should also follow different market requirements in order to be commercialised. The characteristics are presented and the architectures projected over them to evaluate their commercial capabilities.Peer ReviewedPostprint (published version

Deep Space Network information system architecture study

The purpose of this article is to describe an architecture for the Deep Space Network (DSN) information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990s. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies, such as the following: computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control

The system architecture of the Pocket Companion

In the Moby Dick project we design the architecture of a so-called Pocket Companion. It is a small personal portable computer with wireless communication facilities for every day use. The typical use of the Pocket Companion induces a number of requirements concerning security, performance, energy consumption, communication and size. We have shown that these requirements are interrelated and can only be met optimal with one single architecture. The Pocket Companion architecture consists of a central switch with a security module surrounded by several modules. The Pocket Companion is a personal machine. Communication, and particularly wireless communication, is essential for the system to support electronic transactions. Such a system requires a good security infrastructure not only for safeguarding personal data, but also to allow safe (financial) transactions. The integration of a security module in the Pocket Companion architecture provides the basis for a secure environment.\ud Because battery life is limited and battery weight is an important factor for the size and the weight of the Pocket Companion, energy consumption plays a crucial role in the architecture. An important theme of the architecture is: enough performance for minimal energy consumption

The Architecture and Performance Evaluation of iSCSI-Based United Storage Network Merging NAS and SAN

With the ever increasing volume of data in networks, the traditional storage architecture is greatly challenged; more and more people pay attention to network storage. Currently, the main technology of network storage is represented by NAS (Network Attached Storage) and SAN (Storage Area Network). They are different, but mutually complementary and used under different circumstances; however, both NAS and SAN may be needed in the same company. To reduce the TOC (total of cost), for easier implementation, etc., people hope to merge the two technologies. Additionally, the main internetworking technology of SAN is the Fibre Channel; however, the major obstacles are in its poor interoperability, lack of trained staff, high implementation costs, etc. To solve the above-mentioned issues, this paper creatively introduces a novel storage architecture called USN (United Storage Networks), which uses the iSCSI to build the storage network, and merges the NAS and SAN techniques supplying the virtues and overcoming the drawbacks of both, and provides both file I/O and block I/O service simultaneously