Coding against Spreading Gain Optimization of Nonbinary BCH Coded CDMA System

The joint analytical optimisation of the spreading gain and coding gain of nonbinary BCH coded CDMA communication systems is considered in both single-cell and multi-cell scenarios. Furthermore, two types of detectors were employed, namely the minimum mean square error multiuser detector and the classic single-user matched filter detector. It is shown that the optimum coding rate varied over a wide range

Adaptive DS-CDMA multiuser detection for time variant frequency selective Rayleigh fading channel

The current digital wireless mobile system such as IS-95, which is based on direct sequence Code Division Multiple Access (DS-CDMA) technology, will not be able to meet the growing demands for multimedia service due to low information exchanging rate. Its capacity is also limited by multiple accessed interference (MAI) signals. This work focuses on the development of adaptive algorithms for multiuser detection (MUD) and interference suppression for wideband direct sequence code division multiple access (DS-CDMA) systems over time-variant frequency selective fading channels. In addition, channel acquisition and delay estimation techniques are developed to combat the uncertainty introduced by the wireless propagation channel. This work emphasizes fast and simple techniques that can meet practical needs for high data rate signal detection. Most existing literature is not suitable for the large delay spread in wideband systems due to high computational/ hardware complexity. A de-biasing decorrelator is developed whose computational complexity is greatly reduced without sacrificing performance. An adaptive bootstrap symbolbased signal separator is also proposed for a time-variant channel. These detectors achieve MUD for asynchronous, large delay spread, fading channels without training sequences. To achieve high data rate communication, a finite impulse response (FIR) filter based detector is presented for M-ary QAM modulated signals in a multipath Rayleigh fading channel. It is shown that the proposed detector provides a stable performance for QAM signal detection with unknown fading and phase shift. It is also shown that this detector can be easily extended to the reception of any M-ary quadrature modulated signal. A minimum variance decorrelating (MVD) receiver with adaptive channel estimator is presented in this dissertation. It provides comparable performance to a linear MMSE receiver even in a deep fading environment and can be implemented blindly. Using the MVD receiver as a building-block, an adaptive multistage parallel interference cancellation (PIC) scheme and a successive interference cancellation (SIC) scheme were developed. The total number of stages is kept at a minimum as a result of the accurate estimating of the interfering users at the earliest stages, which reduces the implementation complexity, as well as the processing delay. Jointly with the MVD receiver, a new transmit diversity (TD) scheme, called TD-MVD, is proposed. This scheme improves the performance without increasing the bandwidth. Unlike other TD techniques, this TDMVD scheme has the inherent advantage to overcome asynchronous multipath transmission. It brings flexibility in the design of TD antenna systems without restrict signal coordination among those multiple transmissions, and applicable for both existing and next generation of CDMA systems. A maximum likelihood based delay and channel estimation algorithm with reduced computational complexity is proposed. This algorithm uses a diagonal simplicity technique as well as the asymptotically uncorrelated property of the received signal in the frequency domain. In combination with oversampling, this scheme does not suffer from a singularity problem and the performance quickly approaches the Cramer-Rao lower bound (CRLB) while maintaining a computational complexity that is as low as the order of the signal dimension

Novel multiuser detection and multi-rate schemes for multi-carrier CDMA

A large variety of services is [sic] expected for wireless systems, in particular, high data rate services, such as wireless Internet access. Users with different data rates and quality of service (QoS) requirements must be accommodated. A suitable multiple access scheme is key to enabling wireless systems to support both the high data rate and the integrated multiple data rate transmissions with satisfactory performance and flexibility. A multi-carrier code division multiple access (MC-CDMA) scheme is a promising candidate for emerging broadband wireless systems. MC-CDMA is a hybrid of orthogonal frequency division multiplexing (OFDM) and code division multiple access (CDMA). The most salient feature of MC-CDMA is that the rate of transmission is not limited by the wireless channel\u27s frequency-selective fading effects caused by multipath propagation. In MC-CDMA, each chip of the desired user\u27s spreading code, multiplied by the current data bit, is modulated onto a separate subcarrier. Therefore, each subcarrier has a narrow bandwidth and undergoes frequency-flat fading. Two important issues for an MC-CDMA wireless system, multiuser detection and multi-rate access, are discussed in this dissertation. Several advanced receiver structures capable of suppressing multiuser interference in an uplink MC-CDMA system, operating in a frequency-selective fading channel, are studied in this dissertation. One receiver is based on a so-called multishot structure, in which the interference introduced by the asynchronous reception of different users is successfully suppressed by a receiver based on the minimum mean-square error (MMSE) criterion with a built-in de-biasing feature. Like many other multiuser schemes, this receiver is very sensitive to a delay estimation error. A blind adaptive two-stage decorrelating receiver based on the bootstrap algorithm is developed to combat severe performance degradation due to a delay estimation error. It is observed that in the presence of a delay estimation error the blind adaptive bootstrap receiver is more near-far resistant than the MMSE receiver. Furthermore, a differential bootstrap receiver is proposed to extend the limited operating range of the two-stage bootstrap receiver which suffers from a phase ambiguity problem. Another receiver is based on a partial sampling (PS) demodulation structure, which further reduces the sensitivity to unknown user delays in an uplink scenario. Using this partial sampling structure, it is no longer necessary to synchronize the receiver with the desired user. Following the partial sampling demodulator, a minimum mean-square error combining (MMSEC) detector is applied. The partial sampling MMSEC (PS-MMSEC) receiver is shown to have strong interference suppression and timing acquisition capabilities. The complexity of this receiver can be reduced significantly, with negligible performance loss, by choosing a suitable partial sampling rate and using a structure called reduced complexity PS-MMSEC (RPS-MMSEC). The adaptive implementation of these receivers yields a superior rate of convergence and symbol error rate performance in comparison to a conventional MMSEC receiver with known timing. All the above receiver structures are for a single-rate MC-CDMA. Three novel multi-rate access schemes for multi-rate MC-CDMA, fixed spreading length (FSL), coded FSL (CFSL) and variable spreading length (VSL), have been developed. These multi-rate access schemes enable users to transmit information at different data rates in one MC-CDMA system. Hence, voice, data, image and video can be transmitted seamlessly through a wireless infrastructure. The bit error rate performance of these schemes is investigated for both low-rate and high-rate users

Papr analysis and channel estimation techniques for 3GPP LTE system

High data rates and secured data communication has become an unavoidable need of every mobile users. 3G technology provided greater data speed and secured networks compared to its predecessor 2G or 2.5G. The highest bit rates in commercially deployed wireless systems are achieved by means of Orthogonal Frequency Division Multiplexing (OFDM) [1]. The next advance in cellular systems, under investigation by Third Generation Partnership Project (3GPP), also anticipates the adoption of OFDMA to achieve high data rates. But a modified form of OFDMA i.e. SCFDMA (Single Carrier FDMA) having similar throughput performance and essentially the same complexity has been implemented as it has an edge over OFDMA having lower PAPR (peak to average power ratio) [2]. SCFDMA is currently a strong candidate for the uplink multiple access in the Long Term Evolution of cellular systems under consideration by the 3GPP. In our project we have worked on PAPR analysis of OFDMA, SCFDMA and various other SCFDMA (with different subcarrier mapping). Though SCFDMA had larger ISI it has lower PAPR which help in avoiding the need of an efficient linear power amplifier. We have analyzed various modulation techniques and implemented various kinds of pulse shaping filters and compared the PAPR for IFDMA, DFDMA and LFDMA (kinds of SCFDMA). Like other communication systems, in SCFDMA we encounter many trade-offs between design parameters (such as roll-off factor) and performance. The project report also constitutes the channel estimation techniques implemented in OFDM systems. Due to multipath fading the channel impulse response fluctuates for different subcarriers in different time slots. But with channel estimation OFDM systems can use coherent detection instead of differential. For MIMO system like OFDM channel information is vital for diversity combining and interference suppression [3]. So we need to estimate the channel as accurately as possible. As we have taken a slow Rayleigh fading channel in our study we used block type pilot arrangement channel estimation which uses LS (least square), MMSE (minimum mean square error) estimator. Due to higher complexity of the MMSE estimator, modified MMSE is implemented where tradeoff is made with performance. Here we have compared various channel estimation techniques used in OFDM systems. There are various other adaptive estimation techniques like LMS and RLS for estimating blind channels and comb type pilot arrangement estimation techniques for fast fading channels

Adaptive interference cancelation techniques for multicarrier modulated systems

Current wireline systems and wireless broadcasting systems employ multicarrier modulation (MCM). This includes the high-rate digital subscriber line (HDSL), digital audio broadcasting system (DAB) and the digital terrestrial television broadcasting system (dTTb). Multicarrier modulation is also envisioned for high-speed indoor wireless local area networks (WLAN). Additionally, multicarrier code division multiple access (MC-CDMA), a hybrid of orthogonal frequency division multiplexing (OFDM) and CDMA, is proposed for the downlink (base-to-mobile) of a 3rd generation wireless system as part of the IMT-2000 standardization process. The performance of an MC-CDMA system--similar to a direct sequence CDMA (DS-CDMA) system--is limited by the presence of multiple access interference (MAI) . Downlink communications also suffers from MAI as a result of the multipath channel effect, even if it implements orthogonal code multiplexing. Additionally, transmissions aimed at different mobile users may be assigned different powers in order to increase the system capacity, essentially creating a near-far problem for some users. Due to the MC-CDMA signal structure the conventional decorrelator (based on the inverse of the correlation matrix) is dependent on the channel coefficients, suggesting the use of an adaptive multiuser detector, which can track a time-variant channel. The performance of a blind adaptive multiuser detector for MC-CDMA, based on the bootstrap algorithm, is investigated and compared to the performance of the conventional decorrelator. Additionally, the performance is investigated for different channel conditions. First, for a non-faded flat additive white Gaussian noise (AWGN) channel. Second, for a frequency selective channel with and without correlation between the channel coefficients at the different subcarriers. In general, the mobile terminal suffers from limited available resources such as computing power or battery life and, therefore, cannot accommodate the same level of receiver complexity as the base station. For the downlink, however, the received signal structure is less complex due to the assumed synchronized transmission. Moreover, the mobile receiver is merely required to detect the desired user\u27s data stream. To reduce the complexity, detectors are proposed that do not require knowledge of the active users nor their respective codes, but rather use a combined code to represent all the interfering users at once. The performance of the reduced complexity conventional decorrelator is compared to the performance of an adaptive reduced complexity detector using the bootstrap algorithm. The performance of these detectors is also investigated for the aforementioned channel types. For spectral-efficiency, closely spaced subcarriers are used in a multicarrier modulated system. A resulting drawback is a high sensitivity of the performance to a frequency offset. This results from a Doppler shift, due to mobile movement, as well as from a mismatch between the carrier frequencies at the transmitter and receiver. To mitigate this problem an adaptive decorrelator based frequency offset correction scheme is developed for OFDM and its performance is investigated. Additionally, a blind frequency offset estimation and correction structure is proposed based on a stochastic gradient method. The convergence and statistical properties of this estimator are investigated. A blind adaptive joint multiuser detection and frequency offset correction structure for downlink MC-CDMA is developed. This detector is a combination of the structures for multiuser detection for MC-CDMA and frequency offset correction for OFDM. Moreover, the performance of this detector is investigated and compared to a joint detector based on a minimum mean square error (MMSE) criterion

Proceedings of the Fall 1995 Advanced Digital Communication Systems

Coordinated Science Laboratory was formerly known as Control Systems Laborator

Transmit and receive techniques for MIMO-OFDM systems

Ph.DDOCTOR OF PHILOSOPH

Iterative Detection for Overloaded Multiuser MIMO OFDM Systems

Inspired by multiuser detection (MUD) and the ‘Turbo principle’, this thesis deals with iterative interference cancellation (IIC) in overloaded multiuser multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems. Linear detection schemes, such as zero forcing (ZF) and minimum mean square error (MMSE) cannot be used for the overloaded system because of the rank deficiency of channel matrix, while the optimal approach, the maximum likelihood (ML) detection has high computational complexity. In this thesis, an iterative interference cancellation (IIC) multiuser detection scheme with matched filter and convolutional codes is considered. The main idea of this combination is a low complexity receiver. Parallel interference cancellation (PIC) is employed to improve the multiuser receiver performance for overloaded systems. A log-likelihood ratio (LLR) converter is proposed to further improve the reliability of the soft value converted from the output of the matched filter. Simulation results show that the bit error rate (BER) performance of this method is close to the optimal approach for a two user system. However, for the four user or more user system, it has an error floor of the BER performance. For this case, a channel selection scheme is proposed to distinguish whether the channel is good or bad by using the mutual information based on the extrinsic information transfer (EXIT) chart. The mutual information can be predicted in a look-up table which greatly reduces the complexity. For those ‘bad’ channels identified by the channel selection, we introduce two adaptive transmission methods to deal with such channels: one uses a lower code rate, and the other is multiple transmissions. The use of an IIC receiver with the interleave-division multiple access (IDMA) to further improve the BER performance without any channel selection is also investigated. It has been shown that this approach can remove the error floor. Finally, the influence of channel accuracy on the IIC is investigated. Pilot-based Wiener filter channel estimation is used to test and verify how much the IIC is influenced by the channel accuracy

New Detection Algorithms for Single Input Multiple Output Systems with Carrier Frequency Offset

The performance of a multiple antenna wireless communication (WC) system depends significantly on the type of detection algorithm used at the receiver. This thesis proposes three different types of detection algorithms for single input multiple output (SIMO) systems and concludes with a comparative study of their performance in terms of bit error rate (BER). The proposed algorithms are based on the following classical methods: - Maximum Likelihood (ML) detection - Maximal Ratio Combining (MRC) scheme - Minimum Mean Square Error (MMSE) criterion detection The major challenge in any practical WC system is the imperfect knowledge of channel state information (CSI) and carrier frequency offset (CFO) at the receiver. The novel algorithms proposed in this thesis aim for optimal detection of the transmitted signal and are derived for a system in the presence of both CSI and CFO estimation errors. They can be treated as a generalized form of their respective type and it is mathematically shown that the conventional algorithms are a special case in the absence of the estimation error. Finally, the performance of the novel algorithms is demonstrated by exhaustive simulation for multi-level modulation techniques of phase shift keying (PSK) and quadrature amplitude modulation (QAM) with increasing values of estimation error variance