Architecture, design, and modeling of the OPSnet asynchronous optical packet switching node

An all-optical packet-switched network supporting multiple services represents a long-term goal for network operators and service providers alike. The EPSRC-funded OPSnet project partnership addresses this issue from device through to network architecture perspectives with the key objective of the design, development, and demonstration of a fully operational asynchronous optical packet switch (OPS) suitable for 100 Gb/s dense-wavelength-division multiplexing (DWDM) operation. The OPS is built around a novel buffer and control architecture that has been shown to be highly flexible and to offer the promise of fair and consistent packet delivery at high load conditions with full support for quality of service (QoS) based on differentiated services over generalized multiprotocol label switching

Performance issues in optical burst/packet switching

The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-642-01524-3_8This chapter summarises the activities on optical packet switching (OPS) and optical burst switching (OBS) carried out by the COST 291 partners in the last 4 years. It consists of an introduction, five sections with contributions on five different specific topics, and a final section dedicated to the conclusions. Each section contains an introductive state-of-the-art description of the specific topic and at least one contribution on that topic. The conclusions give some points on the current situation of the OPS/OBS paradigms

An assembly and offset assignment scheme for self-similar traffic in optical burst switching

Includes bibliographical references.Optical Burst Switching (OBS) is a viable technology for the next generation core network. We propose an FEC-assembly scheme that efficiently assembles self-similar traffic and a Pareto-offset assignment rather than a constant offset assignment. Two buffers, a packet buffer and a burst buffer, are implemented at the Label Edge Router (LER), buffering traffic in the electronic domain. The assembler, between the packet and burst buffers, is served by the packet queue while the assembler serves the burst queue. We outline advantages of why burst assembly cannot be implemented independent of offset assignment. The two schemes must be implemented in a complementary way if QoS is to be realized in an OBS network. We show that there is a direct relation between OBS network performance with burst assembly and offset assignment. We present simulation results of the assembly and offset assignment proposals using the ns2 network simulator. Our results show that the combination of the proposed FEC-Based assembly scheme with the proposed Pareto-offset assignment scheme give better network performance in terms of burst drop, resource contention and delay. Key to any traffic shaping is the nature traffic being shaped. This work also compares performance of both traditional exponential traffic with realistic Self-Similar traffic of Internet traffic on the proposed assembly and offset assignment schemes. In our simulations, we assume that all Label Switch Routers (LSR) have wavelength converters and are without optical buffers. We use Latest Available Unused Channel with Void Filling (LAUC-VF) scheduling scheme and use Just Enough Time (JET) reservation scheme

QoS - Aware content oriented flow routing in optical computer network

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.In this thesis, one of the most important issues in the field of networks communication is tackled and addressed. This issue is represented by QoS, where the increasing demand on highquality applications together with the fast increase in the rates of Internet users have led to massive traffic being transmitted on the Internet. This thesis proposes new ideas to manage the flow of this huge traffic in a manner that contributes in improving the communication QoS. This can be achieved by replacing the conventional application-insensitive routing schemes by others which take into account the type of applications when making the routing decision. As a first contribution, the effect on the potential development in the quality of experience on the loading of Basra optical network has been investigated. Furthermore, the traffic due to each application was dealt with in different ways according to their delay and loss sensitivities. Load rate distributions over the various links due to the different applications were deployed to investigate the places of possible congestions in the network and the dominant applications that cause such congestions. In addition, OpenFlow and Optica Burst Switching (OBS) techniques were used to provide a wider range of network controllability and management. A centralised routing protocol that takes into account the available bandwidth, delay, and security as three important QoS parameters, when forwarding traffics of different types, was proposed and implemented using OMNeT++ networks simulator. As a novel idea, security has been incorporated in our QoS requirements by incorporating Oyster Optics Technology (OOT) to secure some of the optical links aiming to supply the network with some secure paths for those applications that have high privacy requirements. A particular type of traffic is to be routed according to the importance of these three QoS parameters for such a traffic type. The link utilisation, end to end delays and securities due to the different applications were recorded to prove the feasibility of our proposed system. In order to decrease the amount of traffic overhead, the same QoS constraints were implemented on a distributed Ant colony based routing. The traditional Ant routing protocol was improved by adopting the idea of Red-Green-Blue (RGB) pheromones routing to incorporate these QoS constraints. Improvements of 11% load balancing, and 9% security for private data was achieved compared to the conventional Ant routing techniques. In addition, this Ant based routing was utilised to propose an improved solution for the routing and wavelength assignment problem in the WDM optical computer networks

Performance analysis of an optical packet switch employing full/limited range share per node wavelength conversion

In this paper, we study an asynchronous optical packet switching node equipped with a number of limited range or full range wavelength converters shared per node. The packet traffic is realistically modeled by a superposition of a finite number of on-off sources as opposed to the traditional Poisson model which ignores the limited number of ports on a switch. We both study circular and non-circular limited range wavelength conversion schemes. In our simulations, we employ the far conversion policy where the optical packet is switched onto the farthest available wavelength in the tuning range, which is known to outperform the random conversion policy. We propose an approximate analytical method based on block tridiagonal Markov chains and fixed point iterations to solve for the blocking probabilities in share per node wavelength conversion systems. The method provides an accurate approximation for full range systems and acceptable results for limited range systems. © 2007 IEEE

A Priority Based Optical Header Contention Resolution in Optical Burst Switching Networks

OBS is a promising switching paradigm for the next-generation Internet.In OBS, data packets are assembled into variable size data burst which are transmitted optically over Dense Wavelength Division Multiplexing(DWDM)networks without O/E/O conversion. The control packet is sent before the data burst to reserve resources and configure switches along the path .The control packet is sent along the separate control channel and goes through O/E/O conversion. We have discussed various OBS signalling protocols and Burst Scheduling Algorithms. As the data channel bandwidth will grow it will lead to the overloading of the control path. In this thesis we have proposed an algorithm to resolve the contention of the optical header. The algorithm assigns the priority to each control packet arriving at the same time .The control packet with highest priority is selected for processing. Simulation results have shown that the technique is effective in improving the throughput

Offset time-emulated architecture for optical burst switching-modelling and performance evaluation

L'evolució de les xarxes publiques de transport de dades destaca per el continu augment de la demanda de tràfic a la que estan sotmeses. La causa és la imparable popularització d'Internet i del seu ús per a tot tipus d'aplicacions. Les xarxes de commutació de ràfegues òptiques (OBS: Optical Bursts Switching) són una solució extraordinàriament prometedora per la pròxima generació de xarxes, tant per la flexibilitat que ofereixen com per el seu alt rendiment fruit de l'explotació de la multiplexació estadística en el domini òptic.Aquesta tesi presenta l'anàlisi, modelització i avaluació de les xarxes de commutació de ràfegues òptiques basades en l'emulació del temps de compensació (emulated offset time: E-OBS). El concepte d'E-OBS defineix una arquitectura de xarxa OBS per al transportar i commutar ràfegues òptiques en una xarxa troncal en la que, al contrari de l'arquitectura convencional (C-OBS) en la que el temps de compensació s'introdueix des dels nodes d'accés, el temps de compensació s'introdueix en cadascun dels nodes de la xarxa per mitjà d'un retardador de fibra addicional. L'arquitectura E-OBS permet superar algunes de les desavantatges inherents a arquitectures C-OBS, però la seva gran virtut és la compatibilitat amb les xarxes de commutació de circuits òptics (OCS: Optical Circuit Switching) actuals i les futures xarxes de commutació de paquets òptics (OPS: Optical Packet Switching), de manera que les xarxes OBS basades en una arquitectura E-OBS) poden facilitat enormement la transició de unes a les altres.A ala vista dels principals requeriments de disseny de les xarxes OBS, que són la resolució de contencions en el domini òptic, la provisió de qualitat de servei (QoS) i l'òptim encaminament de les ràfegues per tal de minimitzar la congestió de la xarxa, . en aquesta tesi es proposa un disseny de l'arquitectura E-OBS basada en (i) un mètode viable per a la provisió del temps de compensació, (ii) una qualitat alta global de servei, i (iii) un mecanisme d'encaminament que minimitzi congestió de xarxa.- La primera part d'aquesta tesi proporciona la informació documental necessària per al disseny d'E-OBS.- La segona part se centra en l'estudi de la funcionalitat i viabilitat de l'arquitectura E-OBS. S'introdueixen els principis d'operació d'E-OBS i s'identifiquen els principals esculls que presenten les arquitectures C-OBS i que deixen de ser-ho en una arquitectura E-OBS. Alguns d'aquests esculls són la dificultat d'utilitzar un algorisme d'encaminament amb rutes alternatives, la complexitat dels algoritmes de reserva de recursos i la seva falta d'equitat, la complexitat en la provisió de la QoS, etc. En aquesta segona part es constata que l'arquitectura E-OBS redueix la complexitat dels de reserva de recursos i es verifica la viabilitat d'operació i de funcionament de la provisió del tremps de compensació en aquesta arquitectura a partir de figures de comportament obtingudes amb retardadors de fibra comercialment disponibles.- La tercera part encara el problema de la provisió de la QoS. Primer s'hi revisen els conceptes bàsics de QoS així com els mecanismes de tractament de la QoS per a xarxes OBS fent-ne una comparació qualitativa i de rendiment de tots ells. Com a resultat s'obté que el mecanisme que presenta un millor comportament és el d'avortament de la transmissió de les ràfegues de més baixa prioritat quan aquestes col·lisionen amb una de prioritat més alta (es l'anomenat Burst Preemption mechanism), el qual en alguns casos presenta un problema de senyalització innecessària. Aquesta tercera part es conclou amb la proposta d'un mecanisme de finestra a afegir al esquema de Burst Preemption que només funciona sobre una arquitectura E-OBS i que soluciona aquest problema.- En la quarta part s'afronta el problema de l'encaminament en xarxes OBS. S'estudia el comportament dels algoritmes d'encaminament adaptatius, els aïllats amb rutes alternatives i els multicamí distribuïts, sobre xarxes E-OBS. A la vista dels resultats no massa satisfactoris que s'obtenen, es planteja una solució alternativa que es basa en model d'optimització no lineal. Es formulen i resolen dos models d'optimització per als algoritmes encaminament de font multicamí que redueixen notablement la congestió en les xarxes OBS.Finalment, aquesta tesi conclou que l'arquitectura E-OBS és factible, que és més eficient que la C-OBS, que proveeix eficaçment QoS, i que és capaç d'operar amb diverses estratègies d'encaminament i de reduir eficaçment la congestió de xarxa.The fact that the Internet is a packet-based connection-less network is the main driver to develop a data-centric transport network. In this context, the optical burst switching (OBS) technology is considered as a promising solution for reducing the gap between transmission and switching speeds in future networks.This thesis presents the analysis, modelling, and evaluation of the OBS network with Emulated offset-time provisioning (E-OBS). E-OBS defines an OBS network architecture to transport and switch optical data bursts in a core network. On the contrary to a conventional offset-time provisioning OBS (C-OBS) architecture, where a transmission offset time is introduced in the edge node, in an E-OBS network the offset time is provided in the core node by means of an additional fibre delay element. The architecture is motivated by several drawbacks inherent to C-OBS architectures. It should be pointed out that the E-OBS has not been studied intensively in the literature and this concept has been considered rather occasionally.Due to the limitations in optical processing and queuing, OBS networks need a special treatment so that they could solve problems typical of data-centric networks. Contention resolution in optical domain together with quality of service (QoS) provisioning for quality demanding services are, among other things, the main designing issues when developing OBS networks. Another important aspect is routing problem, which concerns effective balancing of traffic load so that to reduce burst congestion at overloaded links. Accounting for these requirements, the design objectives for the E-OBS architecture are (i) feasibility of offset-time provisioning, (ii) an overall high quality of service, and (iii) reduction of network congestion. These objectives are achieved by combining selected concepts and strategies, together with appropriate system design as well as network traffic engineering.The contributions in this thesis can be summarized as follows.- At the beginning, we introduce the principles of E-OBS operation and we demonstrate that C-OBS possesses many drawbacks that can be easily avoided in E-OBS. Some of the discussed issues are the problem of unfairness in resources reservation, difficulty with alternative routing, complexity of resources reservation algorithms, efficiency of burst scheduling, and complexity in QoS provisioning. The feasibility of E-OBS operation is investigated as well; in this context, the impact of congestion in control plane on OBS operation is studied. As a result, we confirm the feasibility of E-OBS operation with commercially available fibre delay elements.- Then, we provide both qualitative and quantitative comparison of the selected, most addressed in the literature, QoS mechanisms. As an outcome a burst preemption mechanism, which is characterized by the highest overall performance, is qualified for operating in E-OBS. Since the preemptive mechanism may produce the overbooking of resources in an OBS network we address this issue as well. We propose the preemption window mechanism to solve the problem. An analytical model of the mechanism legitimates correctness of our solution.- Finally, we concern with a routing problem - our routing objective is to help the contention resolution algorithms in the reduction of burst losses. We propose and evaluate two isolated alternative routing algorithms designed for labelled E-OBS networks. Then we study multi-path source routing and we use network optimization theory to improve it. The presented formulae for partial derivatives, to be used in a non-linear optimization problem, are straightforward and very fast to compute. It makes the proposed non-linear optimization method a viable alternative for linear programming formulations based on piecewise linear approximations.Concluding, E-OBS is shown to be a feasible OBS network architecture of profitable functionality, to support efficiently the QoS provisioning, and to be able to operate with different routing strategies and effectively reduce the network congestion