45,868 research outputs found
Data-driven Soft Sensors in the Process Industry
In the last two decades Soft Sensors established themselves as a valuable alternative to the traditional means for the acquisition of critical process variables, process monitoring and other tasks which are related to process control. This paper discusses characteristics of the process industry data which are critical for the development of data-driven Soft Sensors. These characteristics are common to a large number of process industry fields, like the chemical industry, bioprocess industry, steel industry, etc. The focus of this work is put on the data-driven Soft Sensors because of their growing popularity, already demonstrated usefulness and huge, though yet not completely realised, potential. A comprehensive selection of case studies covering the three most important Soft Sensor application fields, a general introduction to the most popular Soft Sensor modelling techniques as well as a discussion of some open issues in the Soft Sensor development and maintenance and their possible solutions are the main contributions of this work
Experimental analysis of computer system dependability
This paper reviews an area which has evolved over the past 15 years: experimental analysis of computer system dependability. Methodologies and advances are discussed for three basic approaches used in the area: simulated fault injection, physical fault injection, and measurement-based analysis. The three approaches are suited, respectively, to dependability evaluation in the three phases of a system's life: design phase, prototype phase, and operational phase. Before the discussion of these phases, several statistical techniques used in the area are introduced. For each phase, a classification of research methods or study topics is outlined, followed by discussion of these methods or topics as well as representative studies. The statistical techniques introduced include the estimation of parameters and confidence intervals, probability distribution characterization, and several multivariate analysis methods. Importance sampling, a statistical technique used to accelerate Monte Carlo simulation, is also introduced. The discussion of simulated fault injection covers electrical-level, logic-level, and function-level fault injection methods as well as representative simulation environments such as FOCUS and DEPEND. The discussion of physical fault injection covers hardware, software, and radiation fault injection methods as well as several software and hybrid tools including FIAT, FERARI, HYBRID, and FINE. The discussion of measurement-based analysis covers measurement and data processing techniques, basic error characterization, dependency analysis, Markov reward modeling, software-dependability, and fault diagnosis. The discussion involves several important issues studies in the area, including fault models, fast simulation techniques, workload/failure dependency, correlated failures, and software fault tolerance
Application of Computational Intelligence Techniques to Process Industry Problems
In the last two decades there has been a large progress in the computational
intelligence research field. The fruits of the effort spent on the research in the discussed
field are powerful techniques for pattern recognition, data mining, data modelling, etc.
These techniques achieve high performance on traditional data sets like the UCI
machine learning database. Unfortunately, this kind of data sources usually represent
clean data without any problems like data outliers, missing values, feature co-linearity,
etc. common to real-life industrial data. The presence of faulty data samples can have
very harmful effects on the models, for example if presented during the training of the
models, it can either cause sub-optimal performance of the trained model or in the worst
case destroy the so far learnt knowledge of the model. For these reasons the application
of present modelling techniques to industrial problems has developed into a research
field on its own. Based on the discussion of the properties and issues of the data and the
state-of-the-art modelling techniques in the process industry, in this paper a novel
unified approach to the development of predictive models in the process industry is
presented
Study of fault tolerant software technology for dynamic systems
The major aim of this study is to investigate the feasibility of using systems-based failure detection isolation and compensation (FDIC) techniques in building fault-tolerant software and extending them, whenever possible, to the domain of software fault tolerance. First, it is shown that systems-based FDIC methods can be extended to develop software error detection techniques by using system models for software modules. In particular, it is demonstrated that systems-based FDIC techniques can yield consistency checks that are easier to implement than acceptance tests based on software specifications. Next, it is shown that systems-based failure compensation techniques can be generalized to the domain of software fault tolerance in developing software error recovery procedures. Finally, the feasibility of using fault-tolerant software in flight software is investigated. In particular, possible system and version instabilities, and functional performance degradation that may occur in N-Version programming applications to flight software are illustrated. Finally, a comparative analysis of N-Version and recovery block techniques in the context of generic blocks in flight software is presented
An Overview on Application of Machine Learning Techniques in Optical Networks
Today's telecommunication networks have become sources of enormous amounts of
widely heterogeneous data. This information can be retrieved from network
traffic traces, network alarms, signal quality indicators, users' behavioral
data, etc. Advanced mathematical tools are required to extract meaningful
information from these data and take decisions pertaining to the proper
functioning of the networks from the network-generated data. Among these
mathematical tools, Machine Learning (ML) is regarded as one of the most
promising methodological approaches to perform network-data analysis and enable
automated network self-configuration and fault management. The adoption of ML
techniques in the field of optical communication networks is motivated by the
unprecedented growth of network complexity faced by optical networks in the
last few years. Such complexity increase is due to the introduction of a huge
number of adjustable and interdependent system parameters (e.g., routing
configurations, modulation format, symbol rate, coding schemes, etc.) that are
enabled by the usage of coherent transmission/reception technologies, advanced
digital signal processing and compensation of nonlinear effects in optical
fiber propagation. In this paper we provide an overview of the application of
ML to optical communications and networking. We classify and survey relevant
literature dealing with the topic, and we also provide an introductory tutorial
on ML for researchers and practitioners interested in this field. Although a
good number of research papers have recently appeared, the application of ML to
optical networks is still in its infancy: to stimulate further work in this
area, we conclude the paper proposing new possible research directions
Sensor failure detection for jet engines using analytical redundance
Analytical redundant sensor failure detection, isolation and accommodation techniques for gas turbine engines are surveyed. Both the theoretical technology base and demonstrated concepts are discussed. Also included is a discussion of current technology needs and ongoing Government sponsored programs to meet those needs
Recommended from our members
Power system fault prediction using artificial neural networks
The medium term goal of the research reported in this paper was the development of a major in-house suite of strategic computer aided network simulation and decision support tools to improve the management of power systems. This paper describes a preliminary research investigation to access the feasibility of using an Artificial Intelligence (AI) method to predict and detect faults at an early stage in power systems. To achieve this goal, an AI based detector has been developed to monitor and predict faults at an early stage on particular sections of power systems. The detector only requires external measurements taken from the input and output nodes of the power system. The AI detection system is capable of rapidly predicting a malfunction within the system . Simulation will normally take place using equivalent circuit representation. Artificial Neural Networks (ANNs) are used to construct a hierarchical feed-forward structure which is the most important component in the fault detector. Simulation of a transmission line (2-port circuit ) has already been carried out and preliminary results using this system are promising. This approach provided satisfactory results with accuracy of 95% or higher
- …