Resource allocation technique for powerline network using a modified shuffled frog-leaping algorithm

Resource allocation (RA) techniques should be made efficient and optimized in order to enhance the QoS (power & bit, capacity, scalability) of high-speed networking data applications. This research attempts to further increase the efficiency towards near-optimal performance. RA’s problem involves assignment of subcarriers, power and bit amounts for each user efficiently. Several studies conducted by the Federal Communication Commission have proven that conventional RA approaches are becoming insufficient for rapid demand in networking resulted in spectrum underutilization, low capacity and convergence, also low performance of bit error rate, delay of channel feedback, weak scalability as well as computational complexity make real-time solutions intractable. Mainly due to sophisticated, restrictive constraints, multi-objectives, unfairness, channel noise, also unrealistic when assume perfect channel state is available. The main goal of this work is to develop a conceptual framework and mathematical model for resource allocation using Shuffled Frog-Leap Algorithm (SFLA). Thus, a modified SFLA is introduced and integrated in Orthogonal Frequency Division Multiplexing (OFDM) system. Then SFLA generated random population of solutions (power, bit), the fitness of each solution is calculated and improved for each subcarrier and user. The solution is numerically validated and verified by simulation-based powerline channel. The system performance was compared to similar research works in terms of the system’s capacity, scalability, allocated rate/power, and convergence. The resources allocated are constantly optimized and the capacity obtained is constantly higher as compared to Root-finding, Linear, and Hybrid evolutionary algorithms. The proposed algorithm managed to offer fastest convergence given that the number of iterations required to get to the 0.001% error of the global optimum is 75 compared to 92 in the conventional techniques. Finally, joint allocation models for selection of optima resource values are introduced; adaptive power and bit allocators in OFDM system-based Powerline and using modified SFLA-based TLBO and PSO are propose

Fifty Years of Noise Modeling and Mitigation in Power-Line Communications.

Building on the ubiquity of electric power infrastructure, power line communications (PLC) has been successfully used in diverse application scenarios, including the smart grid and in-home broadband communications systems as well as industrial and home automation. However, the power line channel exhibits deleterious properties, one of which is its hostile noise environment. This article aims for providing a review of noise modeling and mitigation techniques in PLC. Specifically, a comprehensive review of representative noise models developed over the past fifty years is presented, including both the empirical models based on measurement campaigns and simplified mathematical models. Following this, we provide an extensive survey of the suite of noise mitigation schemes, categorizing them into mitigation at the transmitter as well as parametric and non-parametric techniques employed at the receiver. Furthermore, since the accuracy of channel estimation in PLC is affected by noise, we review the literature of joint noise mitigation and channel estimation solutions. Finally, a number of directions are outlined for future research on both noise modeling and mitigation in PLC

Very high bit rate power line communications for home networks

ISBN: 978-1-4244-3790-0International audiencePower line communications (PLC) has become a viable local area network (LAN) solution for in-home networks. PLC systems can be used in a wide variety of applications requiring high data rate. Therefore, there is a need to achieve an extremely high bit rate. In this paper, the increase in current technology bandwidth up to 100 MHz is investigated. Furthermore, a fast computational resource allocation algorithm is also developed for linear precoded discrete multitone (LP-DMT), which enables reliable high bit rate under peak BER constraint. Simulations are run over PLC channels and it is highlighted that 1 Gbit/s transmission is achievable and it is also shown that peak BER constraint algorithms give better performance compared to classical peak SER constraint algorithms. In addition, the linear precoding technique brings significant bit rate gain

Ultra wideband gigabit powerline communication

PhDPowerline Communication (PLC) has long been established for low data rate applications by the electric supply companies. Since 1991, the European CENELEC standard EN 50065 has ruled the use of 3 - 148.5KHz frequency range for narrow band PLC applications. Sim- ilar standard has been established by the IEEE in the US, where a frequency range of 50 - 450KHz is available. The fast growth of Internet since the 1990s accelerated the demands for digital communication services. Furthermore, with the develop- ment of in-home networking, there is a need to establish high speed data links between multiple household devices. This makes PLC sys- tems march rapidly into the high frequency range above 1MHz. Exist- ing broadband PLC system in the 1.6 - 30MHz frequency range only provides data rates smaller than 200Mbps. With the growing demand of multimedia services such as High De nition (HD) video streaming, much faster transmission speed up to Gigabits per second is required and this can be achieved by increasing the operating frequencies. Ultra Wideband (UWB) transmission in free space provides extremely broad bandwidth for short-range, high data rate applications. If UWB signals could be transmitted over the powerline channels in the high frequency range above 30MHz, data rates up to gigabits per second could be achieved. In this thesis, the possibility of implementing ultra wideband trans- mission over the low voltage indoor powerline is investigated. The starting point is to understand the signal propagation characteristics over powerline cables, in the UWB frequency range. Experimental re- sults indicate that the signal degrades at an acceptable rate over the mains cable in a scaled down UWB frequency band (50MHz - 1GHz), which provides a potential operation band for UWB over PLC ap- plications. Key component for the PLC system, a broadband Radio Frequency (RF) coupler is designed and developed, to introduce UWB signals to the transmission channel. With the channel properties and coupling unit, extensive experimental investigations are carried out to analyse the powerline network environment, including channel loss, noise and radiated emission. Furthermore, theoretical channel capac- ity and link budget are derived from measured parameters. It is shown that the indoor powerline is a suitable media for data transmission in the high frequency range from 50 to 550MHz in the home environment. Finally, system level performance is analysed by modelling the Phys- ical Layer (PHY) data transmission. The Multiband-OFDM UWB proposal for IEEE 802.15.3a standard is used to predict the transmis- sion performance under di erent propagation paths and data rates. The research work conducted in this project has proven that UWB over PLC is highly feasible for future in-home applications. With the global promotion of smart grid applications, UWB over PLC will play an important role in providing high speed data transmission over the power networks

Power Line Communication (PLC) Impulsive Noise Mitigation: A Review

Power Line Communication (PLC) is a technology which transforms the power line into pathways for the conveyance of broadband data. It has the advantage for it can avoid new installation since the current installation used for electrical power can also be used for data transmission. However, this power line channel presents a harsh environment for data transmission owing to the challenges of impulsive noise, high attenuation, selective fading and etc. Impulsive noise poses a severe challenge as its Power Spectral Density (PSD) is between 10–15dB above background noise. For good performance of the PLC system, this noise must be mitigated.  This paper presents a review of the techniques for the mitigation of impulsive noise in PLC which is classified into four categories, namely time domain, time/frequency domain, error correction code and other techniques. Time domain technique is a memoryless nonlinear technique where the signal's amplitude only changes according to a specified threshold without changing the phase.  Mitigation of impulsive noise is carried out on the received time domain signal before the demodulation FFT operation of the OFDM. Time/Frequency technique is a method of mitigating impulsive noise on the received signal at both before FFT demodulation and after FFT demodulation of the OFDM system. Error correction code technique is the application of forward error correction code by adding redundancy bits to the useful data bits for detection and possibly correction of error occurring during transmission.  Identifying the best performing technique will enhance the deployment of the technique while exploring the PLC channel capacity enhancement in the future. The best performing scheme in each of the category were selected and their BER vs SNR curves were compared with respect to the impulsive noise + awgn curve. Amongst all of these techniques, the error correction code technique had a performance that presents almost an outright elimination of impulsive noise in power line channel. Keywords: Impulsive noise, time domain, time/frequency domain, error correction code, sparse Bayesian learning, recursive detection and modified PLC-DMT

A flexible statistical framework for the characterization and modelling of noise in powerline communication channels.

Doctor of Philosophy in Electronic Engineering.One communication medium that has received a lot of interest in recent years is the power line channel, especially for the delivery of broadband content. This channel has been traditionally used to carry electrical power only. But with the recent advancements in digital signal processing, it is now possible to realize communications through the power grid, both in narrowband and broadband. The use of the power line network for telecommunication purposes constitutes what is referred to as powerline carrier communications or simply powerline communications (PLC). The biggest incentive for PLC technology use is the fact that the power line network is already in place, which greatly reduces the communication network set up cost, since no new cabling layout is required. PLC technology is widely applied in home networking, broadband internet provision and smart grid solutions. However, the PLC channel presents a very hostile communication environment. And as such, no consideration has been made in the design of traditional power line network to accommodate communication services. Of all the PLC channel impairments which include frequency-dependent attenuation, frequency selectivity, multipath and noise, noise is the biggest threat to communication signals. This noise manifests itself in form of coloured background noise, narrowband interference and impulsive noise. A thorough understanding of this noise distribution is therefore crucial for the design of a reliable and high performing PLC system. A proper understanding of the noise characteristics in the PLC channel can only be realized through noise measurements in live power networks, and then analyzing and modeling the noise appropriately. Moreover, the noise scenario in power line networks is very complex and therefore cannot be modeled through mere analytical methods. Additionally, most of the models that have been proposed for the PLC noise previously are mere adaptations of the measured noise to some existing impulsive noise models. These earlier modeling approaches are also rigid and model the noise via a fixed set of parameters. In the introductory work in this thesis, a study of orthogonal frequency division multiplexing (OFDM) as the modulation of choice for PLC systems is presented. A thorough survey of the salient features of this modulation scheme that make it the perfect candidate for PLC modulation needs is presented. In the end, a performance analysis study on the impact of impulsive noise on an OFDM based binary phase shift keying (BPSK) system is done. This study differs from earlier ones in that its focus is on how the elementary parameters that define the impulsive noise affect the system, a departure from the usual norm of considering the overall noise distribution. This study focuses on the impact of interarrival times (IAT), pulse amplitudes as well as pulse widths, among other parameters. In the first part of the main work in this thesis, results of an intensive noise measurement campaign for indoor low voltage power line noise carried out in various power line networks, in the Department of Electrical, Electronic and Computer Engineering buildings at the University of KwaZulu-Natal, Howard campus are presented. The noise measurements are carried out in both time and frequency domains. Next, the noise measurements are then analyzed and modeled using two very flexible data modeling tools; nonparametric kernel density estimators and parametric alpha stable (α-stable) distributions. The kernel method’s ability to overcome all the shortcomings of the primitive histogram method makes it very attractive. In this method, the noise data structure is derived straight from the data itself, with no prior assumptions or restrictions on the data structure, thus effectively overcoming the rigidity associated with previous noise models for power line channels. As such, it results in density estimates that “hug” the measured density as much as possible. The models obtained using the kernel methods are therefore better than any parametric equivalent; something that can always be proven through goodness of fit tests. These models therefore form an excellent reference for parametric modeling of the power line noise. This work forms the author’s first main contribution to PLC research. As a demonstration of the kernel models suitability to act as a reference, parametric models of the noise distribution using the alpha stable (α-stable) distribution are also developed. This distribution is chosen due to its flexibility and ability to capture impulsiveness (long-tailed behaviour), such as the one found in power line noise. Stable distributions are characterized by long/fat tails than those of the Gaussian distribution, and that is the main reason why they are preferable here since the noise characteritics obtained in the kernel technique show visible long/heavy tailed behavior. A parameter estimation technique that is based on quantiles and another on the empirical characteristic function are employed in the extraction of the four parameters that define the characteristic function of the α-stable distribution. The application of the α-stable distribution in other signal processing problems has often been over-simplied by considering the symmetric alpha stable distribution, but in this thesis, the general α-stable distribution is used to model the power line noise. This is necessary so as to ensure that no features of the noise distribution are missed. All the models obtained are validated through error analysis and Chi-square fitness tests. This work forms the author’s second main contribution to PLC research. The author’s last contribution in this thesis is the development of an algorithm for the synthesis of the power line as a Levy stable stochastic process. The algorithm developed is then used to generate the PLC noise process for a random number of alpha stable noise samples using the alpha stable noise parameters obtained in the parametric modeling using stable distributions. This algorithm is generalized for all admissible values of alpha stable noise parameters and therefore results for a Levy stable Gaussian process are also presented for the same number of random noise samples for comparison purposes

High Speed Turbo Tcm Ofdm For Uwb And Powerline System

Turbo Trellis-Coded Modulation (TTCM) is an attractive scheme for higher data rate transmission, since it combines the impressive near Shannon limit error correcting ability of turbo codes with the high spectral efficiency property of TCM codes. We build a punctured parity-concatenated trellis codes in which a TCM code is used as the inner code and a simple parity-check code is used as the outer code. It can be constructed by simple repetition, interleavers, and TCM and functions as standard TTCM but with much lower complexity regarding real world implementation. An iterative bit MAP decoding algorithm is associated with the coding scheme. Orthogonal Frequency Division Multiplexing (OFDM) modulation has been a promising solution for efficiently capturing multipath energy in highly dispersive channels and delivering high data rate transmission. One of UWB proposals in IEEE P802.15 WPAN project is to use multi-band OFDM system and punctured convolutional codes for UWB channels supporting data rate up to 480Mb/s. The HomePlug Networking system using the medium of power line wiring also selects OFDM as the modulation scheme due to its inherent adaptability in the presence of frequency selective channels, its resilience to jammer signals, and its robustness to impulsive noise in power line channel. The main idea behind OFDM is to split the transmitted data sequence into N parallel sequences of symbols and transmit on different frequencies. This structure has the particularity to enable a simple equalization scheme and to resist to multipath propagation channel. However, some carriers can be strongly attenuated. It is then necessary to incorporate a powerful channel encoder, combined with frequency and time interleaving. We examine the possibility of improving the proposed OFDM system over UWB channel and HomePlug powerline channel by using our Turbo TCM with QAM constellation for higher data rate transmission. The study shows that the system can offer much higher spectral efficiency, for example, 1.2 Gbps for OFDM/UWB which is 2.5 times higher than the current standard, and 39 Mbps for OFDM/HomePlug1.0 which is 3 times higher than current standard. We show several essential requirements to achieve high rate such as frequency and time diversifications, multi-level error protection. Results have been confirmed by density evolution. The effect of impulsive noise on TTCM coded OFDM system is also evaluated. A modified iterative bit MAP decoder is provided for channels with impulsive noise with different impulsivity

Powerline communication and demand side management for microgrids

Motivation: The greatest challenge for microgrid deployment is making energy affordable, especially in remote low-income communities. This thesis answers the following research question: Can digital communication reduce the price of electricity for an islanded low voltage microgrid and if so, can broadband powerline communications meet microgrid control requirements? Approach: This study conducts a cost-benefit analysis of the addition of a field area network to a microgrid. Broadband powerline communication is selected as a candidate technology and tested on various microgrid networks to determine its suitability. Results: The main contributions of this study are: A demand-side management strategy and unsubsidised cost reflective tariff structure for rural microgrids in the developing world. A cost-benefit analysis that shows the addition of a low bit rate, medium latency communication system (1 kbps per customer, 100 ms) may reduce the levelized cost of energy by 32%. A performance evaluation of broadband HomePlug powerline communications for microgrids which shows the Homeplug AV2 has a range of 600 m and functions well on complex radial distribution networks. Conclusion: Investment in a minimally capable communication system has significant economic benefit to both customer and utility by enabling smart grid services such as automatic meter reading and demand side management. Since communication technologies share similar bit rate and latency capabilities and are similarly priced, the technology choice is driven more by microgrid geography, complexity, availability and reliability. Powerline communications require no additional cable, but boast reliability similar to dedicated cable solutions. The HomePlug AV meets bit rate and latency requirements, is affordable, reliable, simple and widely available around the world. This study concludes it is a solid candidate for low voltage islanded microgrids. The material presented in this thesis has been published or submitted for publication in an abbreviated format in the following publications: D. Neal et al, "Demand side energy management and customer behavioral response in a rural islanded microgrid," in IEEE PES/IAS PowerAfrica, 2020. D. Neal, D. Rogers and M. McCulloch, "A Techno-Economic Analysis of Communication in Islanded Microgrids," unpublished. Submitted Oct 2023 to Elsevier Renewable and Sustainable Energy Reviews. D. Neal, D. Rogers and M. McCulloch, "Broadband Powerline Communication for Low-Voltage Microgrids," unpublished. Submitted Oct 2023 to IEEE Transactions on Power Delivery

Transmission haut-débit sur les réseaux d'énergie: principes physiques et compatibilité électromagnétique

Power Line Communications consist of transmitting data by reusing the existing powerline as a propagation medium. Powerline networks represent a challenging environment for broadband communications, since they have not been designed for the transmission of high frequency signals. This Habilitation degree thesis presents our research on transmission physics and electromagnetic compatibility for in-home powerline networks. This research has been conducted since 2007 in the framework of a collaboration between Orange Labs and Telecom Bretagne, involving my supervision of three Ph.D. theses defended in 2012, 2013 and 2015, as the principal advisor.La technologie Courant Porteur en Ligne consiste à transmettre des données en réutilisant le réseau électrique classique en tant que support de propagation. Les réseaux d'énergie sont des environnements difficiles pour les communications à haut débit, car ils n'ont pas été conçus pour la transmission d'un signal à haute fréquence. Ce mémoire d'Habilitation à Diriger des Recherches présente mes travaux concernant la physique de la transmission et les aspects de Compatibilité Electro-Magnétique (CEM) pour le réseau électrique domestique. Ils ont été réalisés à partir de 2007 dans le cadre d'une collaboration entre Orange Labs et Telecom Bretagne, notamment à travers trois thèses soutenues en 2012, 2013 et 2015. Après une introduction générale à la technologie CPL, le manuscrit décrit l'environnement de propagation dans les réseaux d'énergie en termes de canal et de bruit électromagnétique. Les principes de la modélisation du canal CPL sont illustrés à partir de la problématique d'identification des trajets de propagation. L'une des principales évolutions du domaine concerne l'application de la technologie Multiple Input Multiple Output (MIMO) aux communications sur réseaux d'énergie. Nos études expérimentales ont démontré que l'adaptation de cette technique issue du domaine de la radio permet un doublement de la capacité de transmission. Nous présentons les campagnes de mesure réalisées au sein d'Orange Labs et du groupe Specialist Task Force 410 de l'ETSI. A partir de ces données, des modèles statistiques de canal de propagation MIMO et de bruit multi-capteurs ont été élaborés. En termes d'émission électromagnétique, la bande utilisée par les systèmes CPL est déjà occupée par d'autres services (radio amateur, radiodiffusion en ondes courtes). Nous décrivons les contraintes CEM des systèmes CPL et abordons les techniques de CEM cognitive, consistant à optimiser les ressources spectrales en tenant compte de la connaissance de l'environnement du système. En particulier, la technique de retournement temporel est étudiée pour la mitigation du rayonnement involontaire et sa performance est étudiée de manière expérimentale. Enfin, le manuscrit présente la problématique de l'efficacité énergétique des systèmes CPL. Nous présentons les mesures expérimentales réalisées afin de modéliser la consommation de modems classiques et MIMO. D'autre part, la configuration de communication en relais a été étudiée, afin d'évaluer le gain de ce mode de transmission en termes de consommation énergétique. A l'avenir, ces travaux pourront être étendus aux réseaux de distribution en basse et moyenne tension, pour le développement et l'optimisation des réseaux d'énergie intelligents, ou Smart Grids