5,525 research outputs found
Infering Air Quality from Traffic Data using Transferable Neural Network Models
This work presents a neural network based model for inferring air quality from traffic measurements.
It is important to obtain information on air quality in urban environments in order to meet legislative and policy requirements. Measurement equipment tends to be expensive to purchase and maintain. Therefore, a model based approach capable of accurate determination of pollution levels is highly beneficial.
The objective of this study was to develop a neural network model to accurately infer pollution levels from existing data sources in Leicester, UK.
Neural Networks are models made of several highly interconnected processing elements. These elements process information by their dynamic state response to inputs. Problems which were not solvable by traditional algorithmic approaches frequently can be solved using neural networks.
This paper shows that using a simple neural network with traffic and meteorological data as inputs, the air quality can be estimated with a good level of generalisation and in near real-time.
By applying these models to links rather than nodes, this methodology can directly be used to inform traffic engineers and direct traffic management decisions towards enhancing local air quality and traffic management simultaneously.Universidad de Málaga. Campus de Excelencia Internacional AndalucÃa Tech
Modelling of SO2 and NOx Emissions from Coal and Biomass Combustion in Air-Firing, Oxyfuel, iG-CLC, and CLOU Conditions by Fuzzy Logic Approach
Chemical looping combustion (CLC) is one of the most advanced technologies allowing for the reduction in CO2 emissions during the combustion of solid fuels. The modified method combines chemical looping with oxygen uncoupling (CLOU) and in situ gasification chemical looping combustion (iG-CLC). As a result, an innovative hybrid chemical looping combustion came into existence, making the above two technologies complementary. Since the complexity of the CLC is still not sufficiently recognized, the study of this process is of a practical significance. The paper describes the experiences in the modelling of complex geometry CLC equipment. The experimental facility consists of two reactors: an air reactor and a fuel reactor. The paper introduces the fuzzy logic (FL) method as an artificial intelligence (AI) approach for the prediction of SO2 and NOx (i.e., NO + NO2) emissions from coal and biomass combustion carried out in air-firing; oxyfuel; iG-CLC; and CLOU conditions. The developed model has been successfully validated on a 5 kWth research unit called the dual fluidized bed chemical looping combustion of solid fuels (DFB-CLC-SF)
Assessing potential reduction in greenhouse gas : an integrated approach
Abstract: Greenhouse gases remain as threat to the environment. Various models employed in greenhouse gases are either to determine the causative factors responsible for emission, forecast emission or to optimize. Integrating these models would reduce the limitations of individual models to better assess possible greenhouse mitigation. This paper addresses the management technique for analyzing, assessing and mitigating industry’s carbon dioxide (CO2) emission. The current work offers a different technique based on an integrated model utilizing the functions of Index Decomposition Analysis (IDA), Artificial Neural Network (ANN) and Data Envelopment Analysis (DEA) composed of activity, structure, intensity and energy-mix as inputs responsible for CO2 emission. By considering how the three different models are integrated into one system, it will be demonstrated how much percentage of an industry’s CO2 can be reduced. The Canadian industrial sector was analyzed using the integrated model and it was discovered that 3.13% of emitted CO2 from year 1991 to year 2035 could be mitigated
Short-, Medium-, and Long-Term Prediction of Carbon Dioxide Emissions using Wavelet-Enhanced Extreme Learning Machine
Carbon dioxide (CO2) is the main greenhouse gas responsible for global warming. Early prediction of CO2 is critical for developing strategies to mitigate the effects of climate change. A sophisticated version of the extreme learning machine (ELM), the wavelet enhanced extreme learning machine (W-EELM), is used to predict CO2 on different time scales (weekly, monthly, and yearly). Data were collected from the Mauna Loa Observatory station in Hawaii, which is ideal for global air sampling. Instead of the traditional method (singular value decomposition), a complete orthogonal decomposition (COD) was used to accurately calculate the weights of the ELM output layers. Another contribution of this study is the removal of noise from the input signal using the wavelet transform technique. The results of the W-EELM model are compared with the results of the classical ELM. Various statistical metrics are used to evaluate the models, and the comparative figures confirm the superiority of the applied models over the ELM model. The proposed W-EELM model proves to be a robust and applicable computer-based technology for modeling CO2concentrations, which contributes to the fundamental knowledge of the environmental engineering perspective. Doi: 10.28991/CEJ-2023-09-04-04 Full Text: PD
Optimizing IC engine efficiency: A comprehensive review on biodiesel, nanofluid, and the role of artificial intelligence and machine learning
Transportation and power generation have historically relied upon Internal Combustion Engines (ICEs). However, because of environmental impact and inefficiency, considerable research has been devoted to improving their performance. Alternative fuels are necessary because of environmental concerns and the depletion of non-renewable fuel stocks. Biodiesel has the potential to reduce emissions and improve sustainability when compared to diesel fuel. Several researchers have examined using nanofluids to increase biodiesel performance in internal combustion engines. Due to their thermal and physical properties, nanoparticles in a host fluid improve engine combustion and efficiency. This comprehensive review examines three key areas for improving ICE efficiency: biodiesel as an alternative fuel, application of nanofluids, and artificial intelligence (AI)/machine learning (ML) integration. The integration of AI/ML in nanoparticle-infused biodiesel offers exciting possibilities for optimizing production processes, enhancing fuel properties, and improving engine performance. This article first discusses, the benefits of biodiesel concerning the environment and various difficulties associated with its usage. The review then explores the effects and characteristics of nanofluids in IC engines, aiming to know their impact on engine emissions and performance. After that, this review discusses the utilization of AI/ML techniques in enhancing the biodiesel-nanofluid combustion process. This article sheds light on the ongoing efforts to make ICE technology more environmentally friendly and energy-efficient by examining current research and emerging patterns in these fields. Finally, the review presents the challenges and future perspectives of the field, paving the way for future research and improvement
Recommended from our members
Low carbon manufacturing: Fundamentals, methodology and application case studies
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The requirement and awareness of the carbon emissions reduction in several scales and
application of sustainable manufacturing have been now critically reviewed as important manufacturing trends in the 21st century. The key requirements for carbon emissions reduction in this context are energy efficiency, resource utilization, waste minimization and even the reduction of total carbon footprint. The recent approaches tend to only analyse and evaluate
carbon emission contents of interested engineering systems. However, a systematic approach based on strategic decision making has not been officially defined with no standards or guidelines further formulated yet. The above requirements demand a fundamentally new approach to future applications of sustainable low carbon manufacturing. Energy and resource efficiencies and effectiveness based low carbon manufacturing (EREEbased LCM) is thus proposed in this research. The proposed EREE-based LCM is able to provide the systematic approach for integrating three key elements (energy efficiency, resource utilization and waste minimization) and taking account of them comprehensively in a scientific manner. The proposed approach demonstrates the solution for reducing carbon emissions in
manufacturing systems at both the machine and shop floor levels. An integrated framework has been developed to demonstrate the feasible approach to achieve effective EREE-based LCM at different manufacturing levels including machine, shop floor,
enterprise and supply chains. The framework is established in the matrix form with appropriate tools and methodologies related to the three keys elements at each manufacturing level. The theoretical model for EREE-based LCM is also presented, which consists of three essential elements including carbon dioxide emissions evaluation, an optimization method and waste
reduction methodology. The preliminary experiment and simulations are carried out to evaluate the proposed concept. The modelling of EREE-based LCM has been developed for both the machine and shop floor
levels. At the machine level, the modelling consists of the simulation of energy consumption due to the effect of machining set-up, the optimization model and waste minimization related to the optimized machining set-up. The simulation is established using sugeno type fuzzy logic. The learning method uses on experimental data (cutting trials) while the optimization model is created using mamdani type fuzzy logic with grey relational grade technique. At the shop floor level, the modelling is designed dependent on the cooperation with machine level modelling. The determination of the work assignment including machining set-up depends on fuzzy integer linear programming for several objectives with the evaluation of energy consumption data from
machine level modelling. The simulation method is applied as the part of shop floor level modelling in order to maximize resource utilization and minimize undesired waste. The output from the shop floor level modelling is machine production a planning with preventive plan that can minimize the total carbon footprint. The axiomatic design theory has been applied to generate the comprehensive conceptual model E-R-W-C (energy, resource, waste and carbon footprint) of EREE-based LCM as a generic
perspective of the systematic modelling. The implementation of EREE-based LCM on both the
machine and shop floor levels are demonstrated using MATLAB toolbox and ProModel based simulation. The proposed concept, framework and modelling have been further evaluated and validated through case studies and experimental results.This work is financially supported by The Royal Thai Government
Simulation of site-specific irrigation control strategies with sparse input data
Crop and irrigation water use efficiencies may be improved by managing irrigation application timing and volumes using physical and agronomic principles. However, the crop water requirement may be spatially variable due to different soil properties and genetic variations in the crop across the field. Adaptive control strategies can be used to locally control water applications in response to in-field temporal and spatial variability with the aim of maximising both crop development and water use efficiency. A simulation framework ‘VARIwise’ has been created to aid the development, evaluation and management of spatially and temporally varied adaptive irrigation control strategies (McCarthy et al., 2010). VARIwise enables alternative control strategies to be simulated with different crop and environmental conditions and at a range of spatial resolutions.
An iterative learning controller and model predictive controller have been implemented in VARIwise to improve the irrigation of cotton. The iterative learning control strategy involves using the soil moisture response to the previous irrigation volume to adjust the applied irrigation volume applied at the next irrigation event. For field implementation this controller has low data requirements as only soil moisture data is required after each irrigation event. In contrast, a model predictive controller has high data requirements as measured soil and plant data are required at a high spatial resolution in a field implementation. Model predictive control involves using a calibrated model to determine the irrigation application and/or timing which results in the highest predicted yield or water use efficiency. The implementation of these strategies is described and a case study is presented to demonstrate the operation of the strategies with various levels of data availability. It is concluded that in situations of sparse data, the iterative learning controller performs significantly better than a model predictive controller
- …