Experimental and numerical investigations of the optical and thermal aspects of a PCM-glazed unit

This paper reports on the thermal and optical characterisation of PCM (phase change material) RT27 using the T-history method and spectrophotometry principles, respectively, and the experimental and numerical performance evaluation of a PCM-glazed unit. Various relationships describing the variations in the extinction, scattering and absorption coefficients within the phase change region were developed, and were validated in a numerical CFD model. The results show that: (i) during rapid phase changes, the transmittance spectra from the PCM are unstable, while under stable conditions visible transmittance values of 90% and 40% are obtained for the liquid and phases, respectively; (ii) the radiation scattering effects are dominant in the solid phase of the PCM, while radiation absorption dominates in the liquid phase; (iii) the optical/radiation performance of PCM can be successfully modelled using the liquid fraction term as the main variable; (iv) the addition of PCM improves the thermal mass of the unit during phase change, but risks of overheating may be a significant factor after the PCM has melted; (v) although the day-lighting aspects of PCM-glazed units are favourable, the change in appearance as the PCM changes phase may be a limiting factor in PCM-glazed units

Energy Saving Techniques for Phase Change Memory (PCM)

In recent years, the energy consumption of computing systems has increased and a large fraction of this energy is consumed in main memory. Towards this, researchers have proposed use of non-volatile memory, such as phase change memory (PCM), which has low read latency and power; and nearly zero leakage power. However, the write latency and power of PCM are very high and this, along with limited write endurance of PCM present significant challenges in enabling wide-spread adoption of PCM. To address this, several architecture-level techniques have been proposed. In this report, we review several techniques to manage power consumption of PCM. We also classify these techniques based on their characteristics to provide insights into them. The aim of this work is encourage researchers to propose even better techniques for improving energy efficiency of PCM based main memory.Comment: Survey, phase change RAM (PCRAM

Pulse code modulated signal synchronizer

A bit synchronizer for a split phase PCM transmission is reported that includes three loop circuits which receive incoming phase coded PCM signals. In the first loop, called a Q-loop, a generated, phase coded, PCM signal is multiplied with the incoming signals, and the frequency and phase of the generated signal are nulled to that of the incoming subcarrier signal. In the second loop, called a B-loop, a circuit multiplies a generated signal with incoming signals to null the phase of the generated signal in a bit phase locked relationship to the incoming signal. In a third loop, called the I-loop, a phase coded PCM signal is multiplied with the incoming signals for decoding the bit information from the PCM signal. A counter means is used for timing of the generated signals and timing of sample intervals for each bit period

Coupled TRNSYS-CFD simulations evaluating the performance of PCM plate heat exchangers in an Airport Terminal building displacement conditioning system

This is the post-print version of the Article. The official published version can be accessed from the link below. Copyright @ 2013 Elsevier.This paper reports on the energy performance evaluation of a displacement ventilation (DV) system in an airport departure hall, with a conventional DV diffuser and a diffuser retrofitted with a phase change material storage heat exchanger (PCM-HX). A TRNSYS-CFD quasi-dynamic coupled simulation method was employed for the analysis, whereby TRNSYS® simulates the HVAC and PID control system and ANSYS FLUENT® is used to simulate the airflow inside the airport terminal space. The PCM-HX is also simulated in CFD, and is integrated into the overall model as a secondary coupled component in the TRNSYS interface. Different night charging strategies of the PCM-HX were investigated and compared with the conventional DV diffuser. The results show that: i) the displacement ventilation system is more efficient for cooling than heating a space; ii) the addition of a PCM-HX system reduces the heating energy requirements during the intermediate and summer periods for specific night charging strategies, whereas winter heating energy remains unaffected; iii) the PCM-HX reduces cooling energy requirements, and; iv) maximum energy savings of 34% are possible with the deployment of PCM-HX retrofitted DV diffuser.This work was funded by the UK Engineering and Physical Sciences Research Council (EPSRC), Grant No: EP/H004181/1

PCM magnetic tape system efficiently records and reproduces data

Split-phase PCM technique consists of data and clock signal recording and reproduction systems. This PCM magnetic tape system achieves a high packing density on the tape and provides a symmetrical reproduction of the recorded signal