8,408 research outputs found
Embedded Model Control calls for disturbance modeling and rejection
Robust control design is mainly devoted to guaranteeing the closed-loop stability of a model-based control law in the presence of parametric uncertainties. The control law is usually a static feedback law which is derived from a (nonlinear) model using different methodologies. From this standpoint, stability can only be guaranteed by introducing some ignorance coefficients and restricting the feedback control effort with respect to the model-based design. Embedded Model Control shows that, the model-based control law must and can be kept intact in the case of uncertainty, if, under certain conditions, the controllable dynamics is complemented by suitable disturbance dynamics capable of real-time encoding the different uncertainties affecting the ‘embedded model', i.e. the model which is both the design source and the core of the control unit. To be real-time updated the disturbance state is driven by an unpredictable input vector, the noise, which can only be estimated from the model error. The uncertainty-based (or plant-based) design concerns the noise estimator, so as to prevent the model error from conveying uncertainty components (parametric, cross-coupling, neglected dynamics) which are command-dependent and thus prone to destabilizing the controlled plant, into the embedded model. Separation of the components in the low and high frequency domain by the noise estimator itself allows stability recovery and guarantee, and the rejection of low frequency uncertainty components. Two simple case studies endowed with simulated and experimental runs will help to understand the key assets of the methodolog
Design of generalized minimum variance controllers for nonlinear multivariable systems
The design and implementation of Generalized Minimum Variance control laws for nonlinear multivariable systems that can include severe nonlinearities is considered. The quadratic cost index minimised involves dynamically weighted error and nonlinear control signal costing terms. The aim here is to show the controller obtained is simple to design and implement. The features of the control law are explored. The controller obtained includes an internal model of the process and in one form is a nonlinear version of the Smith Predictor
State-space approach to nonlinear predictive generalized minimum variance control
A Nonlinear Predictive Generalized Minimum Variance (NPGMV) control algorithm is introduced for the control of nonlinear discrete-time multivariable systems. The plant model is represented by the combination of a very general nonlinear operator and also a linear subsystem which can be open-loop unstable and is represented in state-space model form. The multi-step predictive control cost index to be minimised involves both weighted error and control signal costing terms. The solution for the control law is derived in the time-domain using a general operator representation of the process. The controller includes an internal model of the nonlinear process but because of the assumed structure of the system the state observer is only required to be linear. In the asymptotic case, where the plant is linear, the controller reduces to a state-space version of the well known GPC controller
Closed-Loop Control of a Piezo-Fluidic Amplifier
Fluidic valves based on the Coand\u{a} effect are increasingly being
considered for use in aerodynamic flow control applications. A limiting factor
is their variation in switching time, which often precludes their use. The
purpose of this paper is to demonstrate the closed-loop control of a recently
developed, novel piezo-fluidic valve that reduces response time uncertainty at
the expense of operating bandwidth. Use is made of the fact that a fluidic jet
responds to a piezo tone by deflecting away from its steady state position. A
control signal used to vary this deflection is amplitude modulated onto the
piezo tone. Using only a pressure measurement from one of the device output
channels, an output-based LQG regulator was designed to follow a desired
reference deflection, achieving control of a 90 m/s jet. Finally, the
controller's performance in terms of disturbance rejection and response time
predictability is demonstrated.Comment: 31 pages, 23 figures. Published in AIAA Journal, 4th May 202
Optimal cooperative control synthesis of active displays
A technique is developed that is intended to provide a systematic approach to synthesizing display augmentation for optimal manual control in complex, closed-loop tasks. A cooperative control synthesis technique, previously developed to design pilot-optimal control augmentation for the plant, is extended to incorporate the simultaneous design of performance enhancing displays. The technique utilizes an optimal control model of the man in the loop. It is applied to the design of a quickening control law for a display and a simple K/s(2) plant, and then to an F-15 type aircraft in a multi-channel task. Utilizing the closed loop modeling and analysis procedures, the results from the display design algorithm are evaluated and an analytical validation is performed. Experimental validation is recommended for future efforts
Sparse and Constrained Stochastic Predictive Control for Networked Systems
This article presents a novel class of control policies for networked control
of Lyapunov-stable linear systems with bounded inputs. The control channel is
assumed to have i.i.d. Bernoulli packet dropouts and the system is assumed to
be affected by additive stochastic noise. Our proposed class of policies is
affine in the past dropouts and saturated values of the past disturbances. We
further consider a regularization term in a quadratic performance index to
promote sparsity in control. We demonstrate how to augment the underlying
optimization problem with a constant negative drift constraint to ensure
mean-square boundedness of the closed-loop states, yielding a convex quadratic
program to be solved periodically online. The states of the closed-loop plant
under the receding horizon implementation of the proposed class of policies are
mean square bounded for any positive bound on the control and any non-zero
probability of successful transmission
Norm Optimal Iterative Learning Control with Application to Problems in Accelerator based Free Electron Lasers and Rehabilitation Robotics
This paper gives an overview of the theoretical basis of the norm optimal approach to iterative learning control followed by results that describe more recent work which has experimentally benchmarking the performance that can be achieved. The remainder of then paper then describes its actual application to a physical process and a very novel application in stroke rehabilitation
- …