Optimal frequency control in microgrid system using fractional order PID controller using Krill Herd algorithm

This paper investigates the use of fractional order Proportional, Integral and Derivative (FOPID) controllers for the frequency and power regulation in a microgrid power system. The proposed microgrid system composes of renewable energy resources such as solar and wind generators, diesel engine generators as a secondary source to support the principle generators, and along with different energy storage devices like fuel cell, battery and flywheel. Due to the intermittent nature of integrated renewable energy like wind turbine and photovoltaic generators, which depend on the weather conditions and climate change this affects the microgrid stability by considered fluctuation in frequency and power deviations which can be improved using the selected controller. The fractional-order controller has five parameters in comparison with the classical PID controller, and that makes it more flexible and robust against the microgrid perturbation. The Fractional Order PID controller parameters are optimized using a new optimization technique called Krill Herd which selected as a suitable optimization method in comparison with other techniques like Particle Swarm Optimization. The results show better performance of this system using the fractional order PID controller-based Krill Herd algorithm by eliminates the fluctuations in frequency and power deviation in comparison with the classical PID controller. The obtained results are compared with the fractional order PID controller optimized using Particle Swarm Optimization. The proposed system is simulated under nominal conditions and using the disconnecting of storage devices like battery and Flywheel system in order to test the robustness of the proposed methods and the obtained results are compared.У статті досліджено використання регуляторів пропорційного, інтегрального та похідного дробового порядку (FOPID) для регулювання частоти та потужності в електромережі. Запропонована мікромережева система складається з поновлюваних джерел енергії, таких як сонячні та вітрогенератори, дизельних генераторів як вторинного джерела для підтримки основних генераторів, а також з різних пристроїв для накопичування енергії, таких як паливна батарея, акумулятор і маховик. Через переривчасту природу інтегрованої відновлювальної енергії, наприклад, вітрогенераторів та фотоелектричних генераторів, які залежать від погодних умов та зміни клімату, це впливає на стабільність мікромережі, враховуючи коливання частоти та відхилення потужності, які можна поліпшити за допомогою вибраного контролера. Контролер дробового порядку має п’ять параметрів порівняно з класичним PID-контролером, що робить його більш гнучким та надійним щодо збурень мікромережі. Параметри PID-контролера дробового порядку оптимізовані за допомогою нової методики оптимізації під назвою «зграя криля», яка обрана як підходящий метод оптимізації порівняно з іншими методами, такими як оптимізація методом рою частинок. Результати показують кращі показники роботи цієї системи за допомогою алгоритму «зграя криля», заснованого на PID-контролері дробового порядку, виключаючи коливання частоти та відхилення потужності порівняно з класичним PID-контролером. Отримані результати порівнюються з PID-контролером дробового порядку, оптимізованим за допомогою оптимізації методом рою частинок. Запропонована система моделюється в номінальному режимі роботи та використовує відключення накопичувальних пристроїв, таких як акумулятор та маховик, щоб перевірити надійність запропонованих методів та порівняти отримані результати

Advanced and Innovative Optimization Techniques in Controllers: A Comprehensive Review

New commercial power electronic controllers come to the market almost every day to help improve electronic circuit and system performance and efficiency. In DC–DC switching-mode converters, a simple and elegant hysteretic controller is used to regulate the basic buck, boost and buck–boost converters under slightly different configurations. In AC–DC converters, the input current shaping for power factor correction posts a constraint. But, several brilliant commercial controllers are demonstrated for boost and fly back converters to achieve almost perfect power factor correction. In this paper a comprehensive review of the various advanced optimization techniques used in power electronic controllers is presented

Smart Algorithms to Control a Variable Speed Wind Turbine

In this paper, a robust adaptive fuzzy neural network sliding mode (AFNNSM) control design is proposed to maximize the captured energy for a variable speed wind turbine and to minimize the efforts of the drive shaft. Fuzzy neural network (FNN) is used to improve the mathematical system model, by the prediction of model unknown function, which is used by the Sliding mode control approach (SMC) and enables a lower switching gain to be used despite the presence of large uncertainties. As a result, the used robust control action did not exhibit any chattering behavior. This FNN is trained on-line using the backpropagation algorithm (BP). The particle swarm optimization (PSO) algorithm is used in this study to optimize the learning rate of BP algorithm in order to improve the network performance in term of the speed of convergence. The stability is shown by the Lyapunov theory and the trajectory tracking errors converge to zero without any oscillatory behavior. Simulations illustrate the effectiveness of the designed method

A Review on Optimal Operation of Distributed Network Embedded to Wind-Battery Storage System

Energy is a vital requirement for today's socio-economic welfare and development. But due to the continuous increase of the demand the conventional energy resources are depleting day by day and on the verge of extinction. Hence more renewable generation units are emphasised to integrate to the power network to supply the required demand. This incorporation of the distributed generation into the distributed network has the advantages of controllability, flexibility and tremendous potential if it can be exploited properly. However, due to their intermittent and unpredictable nature, there is a need for energy storages to ensure continuous operations, i.e., to meet the load all the time. There are many possible options for energy storage, but the most popular and technologically sound option is battery storage. Along with this battery storage system (BSS), a power conditioning system (PCS) has to be connected for generation of both active and reactive power from the BSS which in turn increases the overall installation cost of BSS. Moreover, the energy storage cost is a function of the storage device power, energy capacities and their specific costs depending on the chosen technology of optimization. Thus, profit from those renewable energy producers have to be maximized, and losses are to be minimized by using dynamic optimization techniques. But along with the advantages there comes the complexities due to the inclusion of distributed generation and the additional energy storages in the power system network. Moreover, it is highly critical to operate the vast system optimally. Hence there are lots of research had been done or are in process for finding the proper approach of optimization of the system. This paper presents a review of the current state of the optimization methods applied to renewable and sustainable energy source embedded with the Energy storage for maximization of the revenue obtained from the power trading to the network

A Review on Optimal Operation of Distributed Network Embedded to Wind-Battery Storage System

Energy is a vital requirement for today’s socio-economic welfare and development. But due to the continuous increase of the demand the conventional energy resources are depleting day by day and on the verge of extinction. Hence more renewable generation units are emphasised to integrate to the power network to supply the required demand. This incorporation of the distributed generation into the distributed network has the advantages of controllability, flexibility and tremendous potential if it can be exploited properly. However, due to their intermittent and unpredictable nature, there is a need for energy storages to ensure continuous operations, i.e., to meet the load all the time. There are many possible options for energy storage, but the most popular and technologically sound option is battery storage. Along with this battery storage system (BSS), a power conditioning system (PCS) has to be connected for generation of both active and reactive power from the BSS which in turn increases the overall installation cost of BSS. Moreover, the energy storage cost is a function of the storage device power, energy capacities and their specific costs depending on the chosen technology of optimization. Thus, profit from those renewable energy producers have to be maximized, and losses are to be minimized by using dynamic optimization techniques. But along with the advantages there comes the complexities due to the inclusion of distributed generation and the additional energy storages in the power system network. Moreover, it is highly critical to operate the vast system optimally. Hence there are lots of research had been done or are in process for finding the proper approach of optimization of the system. This paper presents a review of the current state of the optimization methods applied to renewable and sustainable energy source embedded with the Energy storage for maximization of the revenue obtained from the power trading to the network

A Comprehensive Survey on Particle Swarm Optimization Algorithm and Its Applications

Particle swarm optimization (PSO) is a heuristic global optimization method, proposed originally by Kennedy and Eberhart in 1995. It is now one of the most commonly used optimization techniques. This survey presented a comprehensive investigation of PSO. On one hand, we provided advances with PSO, including its modifications (including quantum-behaved PSO, bare-bones PSO, chaotic PSO, and fuzzy PSO), population topology (as fully connected, von Neumann, ring, star, random, etc.), hybridization (with genetic algorithm, simulated annealing, Tabu search, artificial immune system, ant colony algorithm, artificial bee colony, differential evolution, harmonic search, and biogeography-based optimization), extensions (to multiobjective, constrained, discrete, and binary optimization), theoretical analysis (parameter selection and tuning, and convergence analysis), and parallel implementation (in multicore, multiprocessor, GPU, and cloud computing forms). On the other hand, we offered a survey on applications of PSO to the following eight fields: electrical and electronic engineering, automation control systems, communication theory, operations research, mechanical engineering, fuel and energy, medicine, chemistry, and biology. It is hoped that this survey would be beneficial for the researchers studying PSO algorithms

A Review on Energy Consumption Optimization Techniques in IoT Based Smart Building Environments

In recent years, due to the unnecessary wastage of electrical energy in residential buildings, the requirement of energy optimization and user comfort has gained vital importance. In the literature, various techniques have been proposed addressing the energy optimization problem. The goal of each technique was to maintain a balance between user comfort and energy requirements such that the user can achieve the desired comfort level with the minimum amount of energy consumption. Researchers have addressed the issue with the help of different optimization algorithms and variations in the parameters to reduce energy consumption. To the best of our knowledge, this problem is not solved yet due to its challenging nature. The gap in the literature is due to the advancements in the technology and drawbacks of the optimization algorithms and the introduction of different new optimization algorithms. Further, many newly proposed optimization algorithms which have produced better accuracy on the benchmark instances but have not been applied yet for the optimization of energy consumption in smart homes. In this paper, we have carried out a detailed literature review of the techniques used for the optimization of energy consumption and scheduling in smart homes. The detailed discussion has been carried out on different factors contributing towards thermal comfort, visual comfort, and air quality comfort. We have also reviewed the fog and edge computing techniques used in smart homes

Controlling Techniques for STATCOM using Artificial Intelligence

The static synchronous compensator (STATCOM) is a power electronic converter designed to be shunt-connected with the grid to compensate for reactive power. Although they were originally proposed to increase the stability margin and transmission capability of electrical power systems, there are many papers where these compensators are connected to distribution networks for voltage control and power factor compensation. In these applications, they are commonly called distribution static synchronous compensator (DSTATCOM). In this paper we have focussed on STATCOM and the controlling techniques which are based on artificial intelligence