Optimal simulation of full binary trees on faulty hypercubes

The problem of operating full binary tree based algorithms on a hypercube with faulty nodes was investigated. Developing a method for embedding a full binary tree into the faulty hypercube is the solution to this problem. Two outcomes for embedding an (n-1)-tree into an n-cube with unit dilation and load, that were based on a new embedding technique, were presented. For the problem where the root can be mapped to any nonfaulty hypercube node, the optimum toleration of faults was shown. Moreover, it was demonstrated that the algorithm for the variable root embedding problem is maximal within a class algorithms called recursive embedding algorithms as far as the number of tolerable faults is concerned. Lastly, it was demonstrated that when an O(1/√n) fraction of nodes in the hypercube are faulty, a O(1)-load variable root embedding is not always possible regardless of the significance of the dilation.published_or_final_versio

Efficient hypercube communications

Hypercube algorithms may be developed for a variety of communication-intensive tasks such as sending a message from one node to another, broadcasting a message from one node to all others, broadcasting a message from each node to all others, all-to-all personalized communication, one-to-all personalized communication, and exchanging messages between nodes via fixed permutations. All these communication patterns are special cases of many-to-many personalized communication. The problem of many-to-many personalized communication is investigated here. Two routing algorithms for many-to-many personalized communication are presented here. The algorithms proposed yield very high performance with respect to the number of time steps and packet transmissions. The first algorithm yields high performance through attempts to equibalance the number of messages at intermediate nodes. This technique tries to avoid creating a bottleneck at any node and thus reduces the total communication time. The second algorithm yields high performance through one-step time-lookahead equibalancing. It chooses from the candidate intermediate nodes the one which will probably have the minimum number of messages in the next cycle

Interconnection Networks Embeddings and Efficient Parallel Computations.

To obtain a greater performance, many processors are allowed to cooperate to solve a single problem. These processors communicate via an interconnection network or a bus. The most essential function of the underlying interconnection network is the efficient interchanging of messages between processes in different processors. Parallel machines based on the hypercube topology have gained a great respect in parallel computation because of its many attractive properties. Many versions of the hypercube have been introduced by many researchers mainly to enhance communications. The twisted hypercube is one of the most attractive versions of the hypercube. It preserves the important features of the hypercube and reduces its diameter by a factor of two. This dissertation investigates relations and transformations between various interconnection networks and the twisted hypercube and explore its efficiency in parallel computation. The capability of the twisted hypercube to simulate complete binary trees, complete quad trees, and rings is demonstrated and compared with the hypercube. Finally, the fault-tolerance of the twisted hypercube is investigated. We present optimal algorithms to simulate rings in a faulty twisted hypercube environment and compare that with the hypercube

Processor allocation strategies for modified hypercubes

Parallel processing has been widely accepted to be the future in high speed computing. Among the various parallel architectures proposed/implemented, the hypercube has shown a lot of promise because of its poweful properties, like regular topology, fault tolerance, low diameter, simple routing, and ability to efficiently emulate other architectures. The major drawback of the hypercube network is that it can not be expanded in practice because the number of communication ports for each processor grows as the logarithm of the total number of processors in the system. Therefore, once a hypercube supercomputer of a certain dimensionality has been built, any future expansions can be accomplished only by replacing the VLSI chips. This is an undesirable feature and a lot of work has been under progress to eliminate this stymie, thus providing a platform for easier expansion. Modified hypercubes (MHs) have been proposed as the building blocks of hypercube-based systems supporting incremental growth techniques without introducing extra resources for individual hypercubes. However, processor allocation on MHs proves to be a challenge due to a slight deviation in their topology from that of the standard hypercube network. This thesis addresses the issue of processor allocation on MHs and proposes various strategies which are based, partially or entirely, on table look-up approaches. A study of the various task allocation strategies for standard hypercubes is conducted and their suitability for MHs is evaluated. It is shown that the proposed strategies have a perfect subcube recognition ability and a superior performance. Existing processor allocation strategies for pure hypercube networks are demonstrated to be ineffective for MHs, in the light of their inability to recognize all available subcubes. A comparative analysis that involves the buddy strategy and the new strategies is carried out using simulation results

Fault-Tolerant Ring Embeddings in Hypercubes -- A Reconfigurable Approach

We investigate the problem of designing reconfigurable embedding schemes for a fixed hypercube (without redundant processors and links). The fundamental idea for these schemes is to embed a basic network on the hypercube without fully utilizing the nodes on the hypercube. The remaining nodes can be used as spares to reconfigure the embeddings in case of faults. The result of this research shows that by carefully embedding the application graphs, the topological properties of the embedding can be preserved under fault conditions, and reconfiguration can be carried out efficiently. In this dissertation, we choose the ring as the basic network of interest, and propose several schemes for the design of reconfigurable embeddings with the aim of minimizing reconfiguration cost and performance degradation. The cost is measured by the number of node-state changes or reconfiguration steps needed for processing of the reconfiguration, and the performance degradation is characterized as the dilation of the new embedding after reconfiguration. Compared to the existing schemes, our schemes surpass the existing ones in terms of applicability of schemes and reconfiguration cost needed for the resulting embeddings

Deterministic Computations on a PRAM with Static Processor and Memory Faults.

We consider Parallel Random Access Machine (PRAM) which has some processors and memory cells faulty. The faults considered are static, i.e., once the machine starts to operate, the operational/faulty status of PRAM components does not change. We develop a deterministic simulation of a fully operational PRAM on a similar faulty machine which has constant fractions of faults among processors and memory cells. The simulating PRAM has $n$ processors and $m$ memory cells, and simulates a PRAM with $n$ processors and a constant fraction of $m$ memory cells. The simulation is in two phases: it starts with preprocessing, which is followed by the simulation proper performed in a step-by-step fashion. Preprocessing is performed in time $O((\frac{m}{n}+ \log n)\log n)$. The slowdown of a step-by-step part of the simulation is $O(\log m)$

Interconnection networks for parallel and distributed computing

Parallel computers are generally either shared-memory machines or distributed- memory machines. There are currently technological limitations on shared-memory architectures and so parallel computers utilizing a large number of processors tend tube distributed-memory machines. We are concerned solely with distributed-memory multiprocessors. In such machines, the dominant factor inhibiting faster global computations is inter-processor communication. Communication is dependent upon the topology of the interconnection network, the routing mechanism, the flow control policy, and the method of switching. We are concerned with issues relating to the topology of the interconnection network. The choice of how we connect processors in a distributed-memory multiprocessor is a fundamental design decision. There are numerous, often conflicting, considerations to bear in mind. However, there does not exist an interconnection network that is optimal on all counts and trade-offs have to be made. A multitude of interconnection networks have been proposed with each of these networks having some good (topological) properties and some not so good. Existing noteworthy networks include trees, fat-trees, meshes, cube-connected cycles, butterflies, Möbius cubes, hypercubes, augmented cubes, k-ary n-cubes, twisted cubes, n-star graphs, (n, k)-star graphs, alternating group graphs, de Bruijn networks, and bubble-sort graphs, to name but a few. We will mainly focus on k-ary n-cubes and (n, k)-star graphs in this thesis. Meanwhile, we propose a new interconnection network called augmented k-ary n- cubes. The following results are given in the thesis.1. Let k ≥ 4 be even and let n ≥ 2. Consider a faulty k-ary n-cube Q(^k_n) in which the number of node faults f(_n) and the number of link faults f(_e) are such that f(_n) + f(_e) ≤ 2n - 2. We prove that given any two healthy nodes s and e of Q(^k_n), there is a path from s to e of length at least k(^n) - 2f(_n) - 1 (resp. k(^n) - 2f(_n) - 2) if the nodes s and e have different (resp. the same) parities (the parity of a node Q(^k_n) in is the sum modulo 2 of the elements in the n-tuple over 0, 1, ∙∙∙ , k - 1 representing the node). Our result is optimal in the sense that there are pairs of nodes and fault configurations for which these bounds cannot be improved, and it answers questions recently posed by Yang, Tan and Hsu, and by Fu. Furthermore, we extend known results, obtained by Kim and Park, for the case when n = 2.2. We give precise solutions to problems posed by Wang, An, Pan, Wang and Qu and by Hsieh, Lin and Huang. In particular, we show that Q(^k_n) is bi-panconnected and edge-bipancyclic, when k ≥ 3 and n ≥ 2, and we also show that when k is odd, Q(^k_n) is m-panconnected, for m = (^n(k - 1) + 2k - 6’ / ‘_2), and (k -1) pancyclic (these bounds are optimal). We introduce a path-shortening technique, called progressive shortening, and strengthen existing results, showing that when paths are formed using progressive shortening then these paths can be efficiently constructed and used to solve a problem relating to the distributed simulation of linear arrays and cycles in a parallel machine whose interconnection network is Q(^k_n) even in the presence of a faulty processor.3. We define an interconnection network AQ(^k_n) which we call the augmented k-ary n-cube by extending a k-ary n-cube in a manner analogous to the existing extension of an n-dimensional hypercube to an n-dimensional augmented cube. We prove that the augmented k-ary n-cube Q(^k_n) has a number of attractive properties (in the context of parallel computing). For example, we show that the augmented k-ary n-cube Q(^k_n) - is a Cayley graph (and so is vertex-symmetric); has connectivity 4n - 2, and is such that we can build a set of 4n - 2 mutually disjoint paths joining any two distinct vertices so that the path of maximal length has length at most max{{n- l)k- (n-2), k + 7}; has diameter [(^k) / (_3)] + [(^k - 1) /( _3)], when n = 2; and has diameter at most (^k) / (_4) (n+ 1), for n ≥ 3 and k even, and at most [(^k)/ (_4) (n + 1) + (^n) / (_4), for n ^, for n ≥ 3 and k odd.4. We present an algorithm which given a source node and a set of n - 1 target nodes in the (n, k)-star graph S(_n,k) where all nodes are distinct, builds a collection of n - 1 node-disjoint paths, one from each target node to the source. The collection of paths output from the algorithm is such that each path has length at most 6k - 7, and the algorithm has time complexity O(k(^3)n(^4))

Recursive circulants and their embeddings among hypercubes

AbstractWe propose an interconnection structure for multicomputer networks, called recursive circulant. Recursive circulant G(N,d) is defined to be a circulant graph with N nodes and jumps of powers of d. G(N,d) is node symmetric, and has some strong hamiltonian properties. G(N,d) has a recursive structure when N=cdm, 1⩽c<d. We develop a shortest-path routing algorithm in G(cdm,d), and analyze various network metrics of G(cdm,d) such as connectivity, diameter, mean internode distance, and visit ratio. G(2m,4), whose degree is m, compares favorably to the hypercube Qm. G(2m,4) has the maximum possible connectivity, and its diameter is ⌈(3m−1)/4⌉. Recursive circulants have interesting relationship with hypercubes in terms of embedding. We present expansion one embeddings among recursive circulants and hypercubes, and analyze the costs associated with each embedding. The earlier version of this paper appeared in Park and Chwa (Proc. Internat. Symp. Parallel Architectures, Algorithms and Networks ISPAN’94, Kanazawa, Japan, December 1994, pp. 73–80)