286 research outputs found
Hardware-Impaired Rician-Faded Cell-Free Massive MIMO Systems With Channel Aging
We study the impact of channel aging on the uplink of a cell-free (CF)
massive multiple-input multiple-output (mMIMO) system by considering i)
spatially-correlated Rician-faded channels; ii) hardware impairments at the
access points and user equipments (UEs); and iii) two-layer large-scale fading
decoding (LSFD). We first derive a closed-form spectral efficiency (SE)
expression for this system, and later propose two novel optimization techniques
to optimize the non-convex SE metric by exploiting the
minorization-maximization (MM) method. The first one requires a numerical
optimization solver, and has a high computation complexity. The second one with
closed-form transmit power updates, has a trivial computation complexity. We
numerically show that i) the two-layer LSFD scheme effectively mitigates the
interference due to channel aging for both low- and high-velocity UEs; and ii)
increasing the number of AP antennas does not mitigate the SE deterioration due
to channel aging. We numerically characterize the optimal pilot length required
to maximize the SE for various UE speeds. We also numerically show that the
proposed closed-form MM optimization yields the same SE as that of the first
technique, which requires numerical solver, and that too with a much reduced
time-complexity.Comment: This work has been submitted to the IEEE Transactions on
Communications for possible publication. Copyright may be transferred without
notice, after which this version may no longer be accessible, 32 pages, 14
figure
Massive MIMO with Non-Ideal Arbitrary Arrays: Hardware Scaling Laws and Circuit-Aware Design
Massive multiple-input multiple-output (MIMO) systems are cellular networks
where the base stations (BSs) are equipped with unconventionally many antennas,
deployed on co-located or distributed arrays. Huge spatial degrees-of-freedom
are achieved by coherent processing over these massive arrays, which provide
strong signal gains, resilience to imperfect channel knowledge, and low
interference. This comes at the price of more infrastructure; the hardware cost
and circuit power consumption scale linearly/affinely with the number of BS
antennas . Hence, the key to cost-efficient deployment of large arrays is
low-cost antenna branches with low circuit power, in contrast to today's
conventional expensive and power-hungry BS antenna branches. Such low-cost
transceivers are prone to hardware imperfections, but it has been conjectured
that the huge degrees-of-freedom would bring robustness to such imperfections.
We prove this claim for a generalized uplink system with multiplicative
phase-drifts, additive distortion noise, and noise amplification. Specifically,
we derive closed-form expressions for the user rates and a scaling law that
shows how fast the hardware imperfections can increase with while
maintaining high rates. The connection between this scaling law and the power
consumption of different transceiver circuits is rigorously exemplified. This
reveals that one can make the circuit power increase as , instead of
linearly, by careful circuit-aware system design.Comment: Accepted for publication in IEEE Transactions on Wireless
Communications, 16 pages, 8 figures. The results can be reproduced using the
following Matlab code: https://github.com/emilbjornson/hardware-scaling-law
Spatial modulation schemes and modem architectures for millimeter wave radio systems
The rapid growth of wireless industry opens the door to several use cases such as internet of things and device-to-device communications, which require boosting the reliability and the spectral efficiency of the wireless access network, while reducing the energy consumption at the terminals. The vast spectrum available in millimeter-wave (mmWave) frequency band is one of the most promising candidates to achieve high-speed communications. However, the propagation of the radio signals at high carrier frequencies suffers from severe path-loss which reduces the coverage area. Fortunately, the small wavelengths of the mmWave signals allow packing a large number of antennas not only at the base station (BS) but also at the user terminal (UT). These massive antenna arrays can be exploited to attain high beamforming and combining gains and overcome the path-loss associated with the mmWave propagation. In conventional (fully digital) multiple-input-multiple-output (MIMO) transceivers, each antenna is connected to a specific radio-frequency (RF) chain and high resolution analog-to-digital-converter. Unfortunately, these devices are expensive and power hungry especially at mmWave frequency band and when operating in large bandwidths. Having this in mind, several MIMO transceiver architectures have been proposed with the purpose of reducing the hardware cost and the energy consumption.
Fully connected hybrid analog and digital precoding schemes were proposed in with the aim of replacing some of the conventional RF chains by energy efficient analog devices. These fully connected mapping requires many analog devices that leads to non-negligible energy consumption. Partially connected hybrid architectures have been proposed to improve the energy efficiency of the fully connected transceivers by reducing the number of analog devices. Simplifying the transceiver’s architecture to reduce the power consumption results in a degradation of the attained spectral efficiency.
In this PhD dissertation, we propose novel modulation schemes and massive MIMO transceiver design to combat the challenges at the mmWave cellular systems. The structure of the doctoral manuscript can be expressed as
In Chapter 1, we introduce the transceiver design challenges at mmWave cellular communications. Then, we illustrate several state of the art architectures and highlight their limitations. After that, we propose scheme that attains high-energy efficiency and spectrum efficiency.
In chapter 2, first, we mathematically describe the state of the art of the SM and highlight the main challenges with these schemes when applied at mmWave frequency band. In order to combat these challenges (for example, high cost and high power consumption), we propose novel SM schemes specifically designed for mmWave massive MIMO systems. After that, we explain how these schemes can be exploited in attaining energy efficient UT architecture. Finally, we present the channel model, systems assumptions and the transceiver devices power consumption models.
In chapter 3, we consider single user SM system. First, we propose downlink (DL) receive SM (RSM) scheme where the UT can be implemented with single or multiple radio-frequency chains and the BS can be fully digital or hybrid architecture. Moreover, we consider different precoders at the BS and propose low complexity and efficient antenna selection schemes for narrowband and wideband transmissions. After that, we propose joint uplink-downlink SM scheme where we consider RSM in the DL and transmit SM (TSM) in the UL based on energy efficient hybrid UT architecture.
In chapter 4, we extend the SM system to the multi-user case. Specifically, we develop joint multi-user power allocation, user selection and antenna selection algorithms for the broadcast and the multiple access channels.
Chapter 5 is presented for concluding the thesis and proposing future research directions.Considerando los altos requerimientos de los servicios de nueva generación, las infraestructuras de red actual se han visto obligadas a evolucionar en la forma de manejar los diferentes recursos de red y computación. Con este fin, nuevas tecnologías han surgido para soportar las funcionalidades necesarias para esta evolución, significando también un gran cambio de paradigma en el diseño de arquitecturas para la futura implementación de redes.En este sentido, este documento de tesis doctoral presenta un análisis sobre estas tecnologías, enfocado en el caso de redes inter/intra Data Centre. Por consiguiente, la introducción de tecnologías basadas en redes ópticas ha sido estudiada, con el fin de identificar problemas actuales que puedan llegar a ser solucionados mediante el diseño y aplicación de nuevas técnicas, asimismo como a través del desarrollo o la extensión de los componentes de arquitectura de red.Con este propósito, se han definido una serie de propuestas relacionadas con aspectos cruciales, así como el control de dispositivos ópticos por SDN para habilitar el manejo de redes híbridas, la necesidad de definir un mecanismo de descubrimiento de topologías ópticas capaz de exponer información precisa, y el analizar las brechas existentes para la definición de una arquitectura común en fin de soportar las comunicaciones 5G.Para validar estas propuestas, se han presentado una serie de validaciones experimentales por medio de escenarios de prueba específicos, demostrando los avances en control, orquestación, virtualización y manejo de recursos con el fin de optimizar su utilización. Los resultados expuestos, además de corroborar la correcta operación de los métodos y componentes propuestos, abre el camino hacia nuevas formas de adaptar los actuales despliegues de red respecto a los desafíos definidos en el inicio de una nueva era de las telecomunicaciones.Postprint (published version
Performance Evaluation of Hybrid Precoder Design for Multi-User Massive MIMO Systems with Low-Resolution ADCs/DACs
This paper presents a comprehensive analysis and design of a hybrid precoding system tailored for mmWave multi-user massive MIMO systems in both downlink and uplink scenarios. The proposed system employs a two-stage precoding approach, incorporating UQ and NUQ techniques, along with low-resolution DACs in downlink and ADCs in uplink to address hardware limitations. The system considers Zero Forcing and Minimum Mean Square Error algorithms as digital precoding methods for the uplink scenario, while exploring the impact of different DAC resolutions on system performance. Extensive simulations reveal that the proposed system surpasses conventional analog beamforming methods, particularly in multi-user scenarios involving inter-user interference. In downlink, the system demonstrates a trade-off between SE and EE, achieving higher Energy Efficiency with NUQ. In uplink, NUQ and UQ converters exhibit similar performance trends regardless of the chosen combiner algorithm. The proposed system attains enhanced Spectral and Energy Efficiency while maintaining reduced complexity and overhead. The study significantly contributes to the advancement of efficient and effective mmWave multi-user massive MIMO systems by providing a thorough analysis of various quantization schemes and precoding techniques. The findings of this research are expected to aid in the optimization of 5G and beyond technologies, particularly in high-density deployment scenarios
Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions
Massive MIMO is a compelling wireless access concept that relies on the use
of an excess number of base-station antennas, relative to the number of active
terminals. This technology is a main component of 5G New Radio (NR) and
addresses all important requirements of future wireless standards: a great
capacity increase, the support of many simultaneous users, and improvement in
energy efficiency. Massive MIMO requires the simultaneous processing of signals
from many antenna chains, and computational operations on large matrices. The
complexity of the digital processing has been viewed as a fundamental obstacle
to the feasibility of Massive MIMO in the past. Recent advances on
system-algorithm-hardware co-design have led to extremely energy-efficient
implementations. These exploit opportunities in deeply-scaled silicon
technologies and perform partly distributed processing to cope with the
bottlenecks encountered in the interconnection of many signals. For example,
prototype ASIC implementations have demonstrated zero-forcing precoding in real
time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing
of 8 terminals). Coarse and even error-prone digital processing in the antenna
paths permits a reduction of consumption with a factor of 2 to 5. This article
summarizes the fundamental technical contributions to efficient digital signal
processing for Massive MIMO. The opportunities and constraints on operating on
low-complexity RF and analog hardware chains are clarified. It illustrates how
terminals can benefit from improved energy efficiency. The status of technology
and real-life prototypes discussed. Open challenges and directions for future
research are suggested.Comment: submitted to IEEE transactions on signal processin
- …