An efficient multichannel wireless sensor networks MAC protocol based on IEEE 802.11 distributed co-ordinated function.

This research aimed to create new knowledge and pioneer a path in the area relating to future trends in the WSN, by resolving some of the issues at the MAC layer in Wireless Sensor Networks. This work introduced a Multi-channel Distributed Coordinated Function (MC-DCF) which takes advantage of multi-channel assignment. The backoff algorithm of the IEEE 802.11 distributed coordination function (DCF) was modified to invoke channel switching, based on threshold criteria in order to improve the overall throughput for wireless sensor networks. This work commenced by surveying different protocols: contention-based MAC protocols, transport layer protocols, cross-layered design and multichannel multi-radio assignments. A number of existing protocols were analysed, each attempting to resolve one or more problems faced by the current layers. The 802.15.4 performed very poorly at high data rate and at long range. Therefore 802.15.4 is not suitable for sensor multimedia or surveillance system with streaming data for future multichannel multi-radio systems. A survey on 802.11 DCF - which was designed mainly for wireless networks –supports and confirm that it has a power saving mechanism which is used to synchronise nodes. However it uses a random back-off mechanism that cannot provide deterministic upper bounds on channel access delay and as such cannot support real-time traffic. The weaknesses identified by surveying this protocol form the backbone of this thesis The overall aim for this thesis was to introduce multichannel with single radio as a new paradigm for IEEE 802.11 Distributed Coordinated Function (DCF) in wireless sensor networks (WSNs) that is used in a wide range of applications, from military application, environmental monitoring, medical care, smart buildings and other industry and to extend WSNs with multimedia capability which sense for instance sounds or motion, video sensor which capture video events of interest. Traditionally WSNs do not need high data rate and throughput, since events are normally captured periodically. With the paradigm shift in technology, multimedia streaming has become more demanding than data sensing applications as such the need for high data rate protocol for WSN which is an emerging technology in this area. The IEEE 802.11 can support data rates up to 54Mbps and 802.11 DCF was designed specifically for use in wireless networks. This thesis focused on designing an algorithm that applied multichannel to IEEE 802.11 DCF back-off algorithm to reduce the waiting time of a node and increase throughput when attempting to access the medium. Data collection in WSN tends to suffer from heavy congestion especially nodes nearer to the sink node. Therefore, this thesis proposes a contention based MAC protocol to address this problem from the inspiration of the 802.11 DCF backoff algorithm resulting from a comparison of IEEE 802.11 and IEEE 802.15.4 for Future Green Multichannel Multi-radio Wireless Sensor Networks

Multi-Channel Distributed Coordinated Function over Single Radio in Wireless Sensor Networks

Multi-channel assignments are becoming the solution of choice to improve performance in single radio for wireless networks. Multi-channel allows wireless networks to assign different channels to different nodes in real-time transmission. In this paper, we propose a new approach, Multi-channel Distributed Coordinated Function (MC-DCF) which takes advantage of multi-channel assignment. The backoff algorithm of the IEEE 802.11 distributed coordination function (DCF) was modified to invoke channel switching, based on threshold criteria in order to improve the overall throughput for wireless sensor networks (WSNs) over 802.11 networks. We presented simulation experiments in order to investigate the characteristics of multi-channel communication in wireless sensor networks using an NS2 platform. Nodes only use a single radio and perform channel switching only after specified threshold is reached. Single radio can only work on one channel at any given time. All nodes initiate constant bit rate streams towards the receiving nodes. In this work, we studied the impact of non-overlapping channels in the 2.4 frequency band on: constant bit rate (CBR) streams, node density, source nodes sending data directly to sink and signal strength by varying distances between the sensor nodes and operating frequencies of the radios with different data rates. We showed that multi-channel enhancement using our proposed algorithm provides significant improvement in terms of throughput, packet delivery ratio and delay. This technique can be considered for WSNs future use in 802.11 networks especially when the IEEE 802.11n becomes popular thereby may prevent the 802.15.4 network from operating effectively in the 2.4 GHz frequency band

Wireless mesh networks for smart-grids

Tese de mestrado. Mestrado Integrado em Engenharia Electrotécnica e de Computadores - Major Telecomunicações. Faculdade de Engenharia. Universidade do Porto. 201

Coexistence and interference mitigation for WPANs and WLANs from traditional approaches to deep learning: a review

More and more devices, such as Bluetooth and IEEE 802.15.4 devices forming Wireless Personal Area Networks (WPANs) and IEEE 802.11 devices constituting Wireless Local Area Networks (WLANs), share the 2.4 GHz Industrial, Scientific and Medical (ISM) band in the realm of the Internet of Things (IoT) and Smart Cities. However, the coexistence of these devices could pose a real challenge—co-channel interference that would severely compromise network performances. Although the coexistence issues has been partially discussed elsewhere in some articles, there is no single review that fully summarises and compares recent research outcomes and challenges of IEEE 802.15.4 networks, Bluetooth and WLANs together. In this work, we revisit and provide a comprehensive review on the coexistence and interference mitigation for those three types of networks. We summarize the strengths and weaknesses of the current methodologies, analysis and simulation models in terms of numerous important metrics such as the packet reception ratio, latency, scalability and energy efficiency. We discover that although Bluetooth and IEEE 802.15.4 networks are both WPANs, they show quite different performances in the presence of WLANs. IEEE 802.15.4 networks are adversely impacted by WLANs, whereas WLANs are interfered by Bluetooth. When IEEE 802.15.4 networks and Bluetooth co-locate, they are unlikely to harm each other. Finally, we also discuss the future research trends and challenges especially Deep-Learning and Reinforcement-Learning-based approaches to detecting and mitigating the co-channel interference caused by WPANs and WLANs

TOWARD ENHANCED WIRELESS COEXISTENCE IN THE 2.4GHZ ISM BAND VIA TEMPORAL CHARACTERIZATION AND EMPIRICAL MODELING OF 802.11B/G/N NETWORKS A DISSERTATION

This dissertation presents an extensive experimental characterization and empirical modelling of 802.11 temporal behavior. A detailed characterization of 802.11b/g/n homogeneous and heterogeneous network traffic patterns is featured, including idle time distribution and channel utilization. Duty cycle serves as a measure for spectrum busyness. Higher duty cycle levels directly impact transceivers using the spectrum, which either refrain from transmission or suffer from increased errors. Duty cycle results are provided for 802.11b, g and n Wi-Fi technologies at various throughput levels. Lower values are observed for 802.11b and g networks. Spectrum occupancy measurements are essential for wireless networks planning and deployment. Detailed characterization of 802.11g/n homogeneous and heterogeneous network traffic patterns, including activity and idle time distribution are presented. Distributions were obtained from time domain measurements and represent time fragment distributions for active and inactive periods during a specific test. This information can assist other wireless technologies in using the crowded ISM band more efficiently and achieve enhanced wireless coexistence. Empirical models of 802.11 networks in the 2.4 GHz Industrial, Scientific, and Medical (ISM) band are also presented. This information can assist other wireless technologies aiming to utilize the crowded ISM band more efficiently and achieve enhanced wireless coexistence. In this work models are derived for both homogeneous and heterogeneous 802.11 network idle time distribution. Additionally, two applications of 802.11 networks temporal characterization are presented. The first application investigates a novel method for identifying wireless technologies through the use of simple energy detection techniques to measure the channel temporal characteristics including activity and idle time probability distributions. In this work, a wireless technology identification algorithm was assessed experimentally. Temporal traffic pattern for 802.11b/g/n homogeneous and heterogeneous networks were measured and used as algorithm input. Identification accuracies of up to 96.83% and 85.9% are achieved for homogeneous and heterogeneous networks, respectively. The second application provides a case study using 802.15.4 ZigBee transmitter packet size on-line adjustments is also presented. Packet size is adaptively modified based on channel idle time distribution obtained using simple channel power measurements. Results demonstrate improved ZigBee performance and significant enhancement in throughput as a result of using adaptive packet size transmissions

Graph-theoretic channel modeling and topology control protocols for wireless sensor networks

This report addresses two different research problems: (i) It presents a wireless channel model that reduces the complexity associated with high order Markov chains; and (ii) presents energy efficient topology control protocols which provide reliability while maintaining the topology in an energy efficient manner. For the above problems, real wireless sensor network traces were collected and extensive simulations were performed for evaluating the proposed protocols. Accurate simulation and analysis of wireless networks are inherently dependent on accurate models which are able to provide real-time channel characterization. High-order Markov chains are typically used to model errors and losses over wireless channels. However, complexity (i.e., the number of states) of a high-order Markov model increases exponentially with the memory-length of the underlying channel. In this report, a novel graph-theoretic methodology that uses Hamiltonian circuits to reduce the complexity of a high-order Markov model to a desired state budget is presented. The implication of unused states in complexity reduction of higher order Markov model is also explained. The trace-driven performance evaluations for real wireless local area network (WLAN) and wireless sensor network (WSN) channels demonstrate that the proposed Hamiltonian Model, while providing orders of magnitude reduction in complexity, renders an accuracy that is comparable to the Markov model and better than the existing reduced state models. Furthermore, a methodology to preserve energy is presented to increase the network lifetime by reducing the node degree forming an active backbone while considering network connectivity. However, in energy stringent wireless sensor networks, it is of utmost importance to construct the reduced topology with the minimal control overhead. Moreover, most wireless links in practice are lossy links with connectivity probability which desires that a routing protocol provides routing flexibility and reliability at a minimum energy consumption cost. For this purpose, distributed and semi-distributed novel graph-theoretic topology construction protocols are presented that exploit cliques and polygons in a WSN to achieve energy efficiency and reliability. The proposed protocols also facilitate load rotation under topology maintenance, thereby extending the network lifetime. In addition to the above, the report also evaluates why the backbone construction using connected dominating set (CDS) in certain cases remains unable to provide connected sensing coverage in the area covered. For this purpose, a novel protocol that reduces the topology while considering sensing area coverage is presented

Multi-channel distributed coordinated function over single radio in wireless sensor networks

Multi-channel assignments are becoming the solution of choice to improve performance in single radio for wireless networks. Multi-channel allows wireless networks to assign different channels to different nodes in real-time transmission. In this paper, we propose a new approach, Multi-channel Distributed Coordinated Function (MC-DCF) which takes advantage of multi-channel assignment. The backoff algorithm of the IEEE 802.11 distributed coordination function (DCF) was modified to invoke channel switching, based on threshold criteria in order to improve the overall throughput for wireless sensor networks (WSNs) over 802.11 networks. We presented simulation experiments in order to investigate the characteristics of multi-channel communication in wireless sensor networks using an NS2 platform. Nodes only use a single radio and perform channel switching only after specified threshold is reached. Single radio can only work on one channel at any given time. All nodes initiate constant bit rate streams towards the receiving nodes. In this work, we studied the impact of non-overlapping channels in the 2.4 frequency band on: constant bit rate (CBR) streams, node density, source nodes sending data directly to sink and signal strength by varying distances between the sensor nodes and operating frequencies of the radios with different data rates. We showed that multi-channel enhancement using our proposed algorithm provides significant improvement in terms of throughput, packet delivery ratio and delay. This technique can be considered for WSNs future use in 802.11 networks especially when the IEEE 802.11n becomes popular thereby may prevent the 802.15.4 network from operating effectively in the 2.4 GHz frequency band