Multi-Granular Optical Cross-Connect: Design, Analysis, and Demonstration

A fundamental issue in all-optical switching is to offer efficient and cost-effective transport services for a wide range of bandwidth granularities. This paper presents multi-granular optical cross-connect (MG-OXC) architectures that combine slow (ms regime) and fast (ns regime) switch elements, in order to support optical circuit switching (OCS), optical burst switching (OBS), and even optical packet switching (OPS). The MG-OXC architectures are designed to provide a cost-effective approach, while offering the flexibility and reconfigurability to deal with dynamic requirements of different applications. All proposed MG-OXC designs are analyzed and compared in terms of dimensionality, flexibility/reconfigurability, and scalability. Furthermore, node level simulations are conducted to evaluate the performance of MG-OXCs under different traffic regimes. Finally, the feasibility of the proposed architectures is demonstrated on an application-aware, multi-bit-rate (10 and 40 Gbps), end-to-end OBS testbed

Towards An Optimal Core Optical Network Using Overflow Channels

This dissertation is based on a traditional circuit switched core WDM network that is supplemented by a pool of wavelengths that carry optical burst switched overflow data. These overflow channels function to absorb channel overflows from traditional circuit switched networks and they also provide wavelengths for newer, high bandwidth applications. The channel overflows that appear at the overflow layer as optical bursts are either carried over a permanently configured, primary light path, or over a burst-switched, best-effort path while traversing the core network. At every successive hop along the best effort path, the optical bursts will attempt to enter a primary light path to its destination. Thus, each node in the network is a Hybrid Node that will provide entry for optical bursts to hybrid path that is made of a point to point, pre-provisioned light path or a burst switched path. The dissertation's main outcome is to determine the cost optimality of a Hybrid Route, to analyze cost-effectiveness of a Hybrid Node and compare it to a route and a node performing non-hybrid operation, respectively. Finally, an example network that consists of several Hybrid Routes and Hybrid Nodes is analyzed for its cost-effectiveness. Cost-effectiveness and optimality of a Hybrid Route is tested for its dependency on the mean and variance of channel demands offered to the route, the number of sources sharing the route, and the relative cost of a primary and overflow path called path cost ratio. An optimality condition that relates the effect of traffic statistics to the path cost ratio is analytically derived and tested. Cost-effectiveness of a Hybrid Node is compared among different switching fabric architecture that is used to construct the Hybrid Node. Broadcast-Select, Benes and Clos architectures are each considered with different degrees of chip integration. An example Hybrid Network that consists of several Hybrid Routes and Hybrid Nodes is found to be cost-effective and dependent of the ratio of switching to transport costs

Multiservice QoS-Enabled MAC for Optical Burst Switching

The emergence of a broad range of network-driven applications (e.g., multimedia, online gaming) brings in the need for a network environment able to provide multiservice capabilities with diverse quality-of-service (QoS) guarantees. In this paper, a medium access control protocol is proposed to support multiple services and QoS levels in optical burst-switched mesh networks without wavelength conversion. The protocol provides two different access mechanisms, queue-arbitrated and prearbitrated for connectionless and connection-oriented burst transport, respectively. It has been evaluated through extensive simulations and its simplistic form makes it very promising for implementation and deployment. Results indicate that the protocol can clearly provide a relative quality differentiation for connectionless traffic and guarantee null (or negligible, and thus acceptable) burst loss probability for a wide range of network (or offered) load while ensuring low access delay for the higher-priority traffic. Furthermore, in the multiservice scenario mixing connectionless and connection-oriented burst transmissions, three different prearbitrated slot scheduling algorithms are evaluated, each one providing a different performance in terms of connection blocking probability. The overall results demonstrate the suitability of this architecture for future integrated multiservice optical networks

Burst switched optical networks supporting legacy and future service types

Focusing on the principles and the paradigm of OBS an overview addressing expectable performance and application issues is presented. Proposals on OBS were published over a decade and the presented techniques spread into many directions. The paper comprises discussions of several challenges that OBS meets, in order to compile the big picture. The OBS principle is presented unrestricted to individual proposals and trends. Merits are openly discussed, considering basic teletraffic theory and common traffic characterisation. A more generic OBS paradigm than usual is impartially discussed and found capable to overcome shortcomings of recent proposals. In conclusion, an OBS that offers different connection types may support most client demands within a sole optical network layer

Performance issues in optical burst/packet switching

The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-642-01524-3_8This chapter summarises the activities on optical packet switching (OPS) and optical burst switching (OBS) carried out by the COST 291 partners in the last 4 years. It consists of an introduction, five sections with contributions on five different specific topics, and a final section dedicated to the conclusions. Each section contains an introductive state-of-the-art description of the specific topic and at least one contribution on that topic. The conclusions give some points on the current situation of the OPS/OBS paradigms

Resource allocation and scalability in dynamic wavelength-routed optical networks.

This thesis investigates the potential benefits of dynamic operation of wavelength-routed optical networks (WRONs) compared to the static approach. It is widely believed that dynamic operation of WRONs would overcome the inefficiencies of the static allocation in improving resource use. By rapidly allocating resources only when and where required, dynamic networks could potentially provide the same service that static networks but at decreased cost, very attractive to network operators. This hypothesis, however, has not been verified. It is therefore the focus of this thesis to investigate whether dynamic operation of WRONs can save significant number of wavelengths compared to the static approach whilst maintaining acceptable levels of delay and scalability. Firstly, the wavelength-routed optical-burst-switching (WR-OBS) network architecture is selected as the dynamic architecture to be studied, due to its feasibility of implementation and its improved network performance. Then, the wavelength requirements of dynamic WR-OBS are evaluated by means of novel analysis and simulation and compared to that of static networks for uniform and non-uniform traffic demand. It is shown that dynamic WR-OBS saves wavelengths with respect to the static approach only at low loads and especially for sparsely connected networks and that wavelength conversion is a key capability to significantly increase the benefits of dynamic operation. The mean delay introduced by dynamic operation of WR-OBS is then assessed. The results show that the extra delay is not significant as to violate end-to-end limits of time-sensitive applications. Finally, the limiting scalability of WR-OBS as a function of the lightpath allocation algorithm computational complexity is studied. The trade-off between the request processing time and blocking probability is investigated and a new low-blocking and scalable lightpath allocation algorithm which improves the mentioned trade-off is proposed. The presented algorithms and results can be used in the analysis and design of dynamic WRONs

Optical Burst-Switched Networks Exploiting Traffic Engineering in the Wavelength Domain

In order to simplify the design and operation of telecommunications networks, it is common to describe them in a layered structure constituted by a service network layer on top of a transport network layer. The service network layer provides services to its users, whereas the transport network layer comprises the infrastructure required to support the service networks. Hence, transport networks should be designed to be as independent as possible from the services supported, while providing functions such as transmission, multiplexing, routing, capacity provisioning, protection, and management. Typically, a transport network includes multiple network domains, such as access, aggregation, metropolitan and core, ordered by decreasing proximity to the end-users, increasing geographical coverage, and growing level of traffic aggregation