Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks

Goodbye, ALOHA!

©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft

802.11n performance analysis for a real multimedia industrial application

In spite of their limitations, wireless networks are being increasingly used in industrial environments. The electromagnetic phenomena that can occur, along with the interference that may occur due to it being an open medium, mean that fluctuations in latencies are often produced. These drawbacks limit the use of wireless networks for distributed factory applications where timeliness is essential. Recent standards, such as 802.11n, offer some interesting characteristics applicable to factory automation. In particular, QoS support and a very high data rate aids their operation under non-saturation conditions, allowing their satisfactory use as an industrial network. In this paper, the potential of these networks is analyzed in a real world scenario and their performance is compared with an idealized scenario. In both cases the priorities behave as expected, however, the algorithms for an auto-rate functioning perform badly in real world situations, especially in industrial scenarios such as those analyzed here, where the mobility of sources and the interference produced by other sources produce frequent rate changes, leading to a reduction in network performance. (C) 2014 Elsevier B.V. All rights reserved.This work is supported by the MCYT of Spain under the project TIN2013-47272-C2-1-R.Silvestre Blanes, JL.; Berenguer Sebastiá, JR.; Sempere Paya, VM.; Todoli Ferrandis, D. (2015). 802.11n performance analysis for a real multimedia industrial application. Computers in Industry. 66:31-40. https://doi.org/10.1016/j.compind.2014.08.00331406

Delay-Reliability Trade-off in MIMO-Enabled IEEE 802.11-Based Wireless Sensor and Actuator Networks

AbstractOne of the main challenges in Wireless Sensor and Actuator Networks (WSAN) is the delay caused by shared and nondeterministic behavior of wireless communication medium. The Retry-Limit parameter of IEEE 802.11 standard can be used to control packet reliability, whereas other parameters mostly effect on the packet delay. In this paper, at first the delay-reliability trade-off in WSANs based on MIMO-Enabled IEEE 802.11 standard, utilizing Enhanced Distributed Channel Access (EDCA) at Medium Access Control (MAC) layer and Maximum Likelihood Spatial Multiplexing at PHYsical (PHY) Layer is studied. Then two simple adaptive schemes have been proposed to minimize packet delay while satisfying the required reliability at noisy factory environment

An improved medium access control protocol for real-time applications in WLANs and its firmware development

The IEEE 802.11 Wireless Local Area Network (WLAN), commonly known as Wi-Fi, has emerged as a popular internet access technology and researchers are continuously working on improvement of the quality of service (QoS) in WLAN by proposing new and efficient schemes. Voice and video over Internet Protocol (VVoIP) applications are becoming very popular in Wi-Fi enabled portable/handheld devices because of recent technological advancements and lower service costs. Different from normal voice and video streaming, these applications demand symmetric throughput for the upstream and downstream. Existing Wi-Fi standards are optimised for generic internet applications and fail to provide symmetric throughput due to traffic bottleneck at access points. Performance analysis and benchmarking is an integral part of WLAN research, and in the majority of the cases, this is done through computer simulation using popular network simulators such as Network Simulator ff 2 (NS-2) or OPNET. While computer simulation is an excellent approach for saving time and money, results generated from computer simulations do not always match practical observations. This is why, for proper assessment of the merits of a proposed system in WLAN, a trial on a practical hardware platform is highly recommended and is often a requirement. In this thesis work, with a view to address the abovementioned challenges for facilitating VoIP and VVoIP services over Wi-Fi, two key contributions are made: i) formulating a suitable medium access control (MAC) protocol to address symmetric traffic scenario and ii) firmware development of this newly devised MAC protocol for real WLAN hardware. The proposed solution shows signifocant improvements over existing standards by supporting higher number of stations with strict QoS criteria. The proposed hardware platform is available off-the-shelf in the market and is a cost effective way of generating and evaluating performance results on a hardware system

Modular software architecture for flexible reservation mechanisms on heterogeneous resources

Management, allocation and scheduling of heterogeneous resources for complex distributed real-time applications is a chal- lenging problem. Timing constraints of applications may be fulfilled by a proper use of real-time scheduling policies, admission control and enforcement of timing constraints. However, it is not easy to design basic infrastructure services that allow for an easy access to the allocation of multiple heterogeneous resources in a distributed environment. In this paper, we present a middleware for providing distributed soft real-time applications with a uniform API for reserving heterogeneous resources with real-time scheduling capabilities in a distributed environment. The architecture relies on standard POSIX OS facilities, such as time management and standard TCP/IP networking services, and it is designed around CORBA, in order to facilitate modularity, flexibility and portability of the applications using it. However, real-time scheduling is supported by proper extensions at the kernel-level, plugged within the framework by means of dedicated resource managers. Our current implementation on Linux supports reservation of CPU, disk and network bandwidth. However, additional resource managers supporting alternative real-time schedulers for these resources, as well as additional types of resources, may be easily added. We present experimental results gathered on both synthetic applications and a real multimedia video streaming case study, showing advantages deriving from the use of the proposed middleware. Finally, overhead figures are reported, showing sustainability of the approach for a wide class of complex, distributed, soft real-time applications

Supporting Real-Time Communication in CSMA-Based Networks : the VTP-CSMA Virtual Token Passing Approach

Tese de doutoramento. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 200

A framework for smart production-logistics systems based on CPS and industrial IoT

Industrial Internet of Things (IIoT) has received increasing attention from both academia and industry. However, several challenges including excessively long waiting time and a serious waste of energy still exist in the IIoT-based integration between production and logistics in job shops. To address these challenges, a framework depicting the mechanism and methodology of smart production-logistics systems is proposed to implement intelligent modeling of key manufacturing resources and investigate self-organizing configuration mechanisms. A data-driven model based on analytical target cascading is developed to implement the self-organizing configuration. A case study based on a Chinese engine manufacturer is presented to validate the feasibility and evaluate the performance of the proposed framework and the developed method. The results show that the manufacturing time and the energy consumption are reduced and the computing time is reasonable. This paper potentially enables manufacturers to deploy IIoT-based applications and improve the efficiency of production-logistics systems

Energy and quality of service management in wireless multimedia sensor networks

Sensor networks are composed of resource constrained nodes that capture data from the environment, preprocess it and then transmit it to a sink node. This paper presents a scenario for monitoring an electricity distribution network, an energy analysis of the used sensor nodes and an intelligent energy and quality of service (QoS) manager. This manager continuously adapts the provided QoS according to the energy level of the nodes