1,491 research outputs found
AirSync: Enabling Distributed Multiuser MIMO with Full Spatial Multiplexing
The enormous success of advanced wireless devices is pushing the demand for
higher wireless data rates. Denser spectrum reuse through the deployment of
more access points per square mile has the potential to successfully meet the
increasing demand for more bandwidth. In theory, the best approach to density
increase is via distributed multiuser MIMO, where several access points are
connected to a central server and operate as a large distributed multi-antenna
access point, ensuring that all transmitted signal power serves the purpose of
data transmission, rather than creating "interference." In practice, while
enterprise networks offer a natural setup in which distributed MIMO might be
possible, there are serious implementation difficulties, the primary one being
the need to eliminate phase and timing offsets between the jointly coordinated
access points.
In this paper we propose AirSync, a novel scheme which provides not only time
but also phase synchronization, thus enabling distributed MIMO with full
spatial multiplexing gains. AirSync locks the phase of all access points using
a common reference broadcasted over the air in conjunction with a Kalman filter
which closely tracks the phase drift. We have implemented AirSync as a digital
circuit in the FPGA of the WARP radio platform. Our experimental testbed,
comprised of two access points and two clients, shows that AirSync is able to
achieve phase synchronization within a few degrees, and allows the system to
nearly achieve the theoretical optimal multiplexing gain. We also discuss MAC
and higher layer aspects of a practical deployment. To the best of our
knowledge, AirSync offers the first ever realization of the full multiuser MIMO
gain, namely the ability to increase the number of wireless clients linearly
with the number of jointly coordinated access points, without reducing the per
client rate.Comment: Submitted to Transactions on Networkin
Uplink Performance of Time-Reversal MRC in Massive MIMO Systems Subject to Phase Noise
Multi-user multiple-input multiple-output (MU-MIMO) cellular systems with an
excess of base station (BS) antennas (Massive MIMO) offer unprecedented
multiplexing gains and radiated energy efficiency. Oscillator phase noise is
introduced in the transmitter and receiver radio frequency chains and severely
degrades the performance of communication systems. We study the effect of
oscillator phase noise in frequency-selective Massive MIMO systems with
imperfect channel state information (CSI). In particular, we consider two
distinct operation modes, namely when the phase noise processes at the BS
antennas are identical (synchronous operation) and when they are independent
(non-synchronous operation). We analyze a linear and low-complexity
time-reversal maximum-ratio combining (TR-MRC) reception strategy. For both
operation modes we derive a lower bound on the sum-capacity and we compare
their performance. Based on the derived achievable sum-rates, we show that with
the proposed receive processing an array gain is achievable. Due
to the phase noise drift the estimated effective channel becomes progressively
outdated. Therefore, phase noise effectively limits the length of the interval
used for data transmission and the number of scheduled users. The derived
achievable rates provide insights into the optimum choice of the data interval
length and the number of scheduled users.Comment: 13 pages, 6 figures, 2 tables, IEEE Transactions on Wireless
Communications (accepted
Massive MIMO with Non-Ideal Arbitrary Arrays: Hardware Scaling Laws and Circuit-Aware Design
Massive multiple-input multiple-output (MIMO) systems are cellular networks
where the base stations (BSs) are equipped with unconventionally many antennas,
deployed on co-located or distributed arrays. Huge spatial degrees-of-freedom
are achieved by coherent processing over these massive arrays, which provide
strong signal gains, resilience to imperfect channel knowledge, and low
interference. This comes at the price of more infrastructure; the hardware cost
and circuit power consumption scale linearly/affinely with the number of BS
antennas . Hence, the key to cost-efficient deployment of large arrays is
low-cost antenna branches with low circuit power, in contrast to today's
conventional expensive and power-hungry BS antenna branches. Such low-cost
transceivers are prone to hardware imperfections, but it has been conjectured
that the huge degrees-of-freedom would bring robustness to such imperfections.
We prove this claim for a generalized uplink system with multiplicative
phase-drifts, additive distortion noise, and noise amplification. Specifically,
we derive closed-form expressions for the user rates and a scaling law that
shows how fast the hardware imperfections can increase with while
maintaining high rates. The connection between this scaling law and the power
consumption of different transceiver circuits is rigorously exemplified. This
reveals that one can make the circuit power increase as , instead of
linearly, by careful circuit-aware system design.Comment: Accepted for publication in IEEE Transactions on Wireless
Communications, 16 pages, 8 figures. The results can be reproduced using the
following Matlab code: https://github.com/emilbjornson/hardware-scaling-law
Self-Interference Cancellation with Nonlinear Distortion Suppression for Full-Duplex Systems
In full-duplex systems, due to the strong self-interference signal, system
nonlinearities become a significant limiting factor that bounds the possible
cancellable self-interference power. In this paper, a self-interference
cancellation scheme for full-duplex orthogonal frequency division multiplexing
systems is proposed. The proposed scheme increases the amount of cancellable
self-interference power by suppressing the distortion caused by the transmitter
and receiver nonlinearities. An iterative technique is used to jointly estimate
the self-interference channel and the nonlinearity coefficients required to
suppress the distortion signal. The performance is numerically investigated
showing that the proposed scheme achieves a performance that is less than 0.5dB
off the performance of a linear full-duplex system.Comment: To be presented in Asilomar Conference on Signals, Systems &
Computers (November 2013
Intersymbol and Intercarrier Interference in OFDM Transmissions through Highly Dispersive Channels
This work quantifies, for the first time, intersymbol and intercarrier
interferences induced by very dispersive channels in OFDM systems. The
resulting achievable data rate for \wam{suboptimal} OFDM transmissions is
derived based on the computation of signal-to-interference-plus-noise ratio for
arbitrary length finite duration channel impulse responses. Simulation results
point to significant differences between data rates obtained via conventional
formulations, for which interferences are supposed to be limited to two or
three blocks, versus the data rates considering the actual channel dispersion
Optical Time-Frequency Packing: Principles, Design, Implementation, and Experimental Demonstration
Time-frequency packing (TFP) transmission provides the highest achievable
spectral efficiency with a constrained symbol alphabet and detector complexity.
In this work, the application of the TFP technique to fiber-optic systems is
investigated and experimentally demonstrated. The main theoretical aspects,
design guidelines, and implementation issues are discussed, focusing on those
aspects which are peculiar to TFP systems. In particular, adaptive compensation
of propagation impairments, matched filtering, and maximum a posteriori
probability detection are obtained by a combination of a butterfly equalizer
and four 8-state parallel Bahl-Cocke-Jelinek-Raviv (BCJR) detectors. A novel
algorithm that ensures adaptive equalization, channel estimation, and a proper
distribution of tasks between the equalizer and BCJR detectors is proposed. A
set of irregular low-density parity-check codes with different rates is
designed to operate at low error rates and approach the spectral efficiency
limit achievable by TFP at different signal-to-noise ratios. An experimental
demonstration of the designed system is finally provided with five
dual-polarization QPSK-modulated optical carriers, densely packed in a 100 GHz
bandwidth, employing a recirculating loop to test the performance of the system
at different transmission distances.Comment: This paper has been accepted for publication in the IEEE/OSA Journal
of Lightwave Technolog
Mobile Communications Beyond 52.6 GHz: Waveforms, Numerology, and Phase Noise Challenge
In this article, the first considerations for the 5G New Radio (NR) physical
layer evolution to support beyond 52.6GHz communications are provided. In
addition, the performance of both OFDM based and DFT-s-OFDM based networks are
evaluated with special emphasis on the phase noise (PN) induced distortion. It
is shown that DFT-s-OFDM is more robust against PN under 5G NR Release 15
assumptions, namely regarding the supported phase tracking reference signal
(PTRS) designs, since it enables more effective PN mitigation directly in the
time domain. To further improve the PN compensation capabilities, the PTRS
design for DFT-s-OFDM is revised, while for the OFDM waveform a novel block
PTRS structure is introduced, providing similar link performance as DFT-s-OFDM
with enhanced PTRS design. We demonstrate that the existing 5G NR Release 15
solutions can be extended to support efficient mobile communications at 60GHz
carrier frequency with the enhanced PTRS structures. In addition, DFT-s-OFDM
based downlink for user data could be considered for beyond 52.6GHz
communications to further improve system power efficiency and performance with
higher order modulation and coding schemes. Finally, network link budget and
cell size considerations are provided, showing that at certain bands with
specific transmit power regulation, the cell size can eventually be downlink
limited.Comment: This manuscript has been submitted to IEEE Wireless Communications
Magazine (WCM). 8 pages, 4 figures, and 2 table
- …