Synthesis and Optimization of Reversible Circuits - A Survey

Reversible logic circuits have been historically motivated by theoretical research in low-power electronics as well as practical improvement of bit-manipulation transforms in cryptography and computer graphics. Recently, reversible circuits have attracted interest as components of quantum algorithms, as well as in photonic and nano-computing technologies where some switching devices offer no signal gain. Research in generating reversible logic distinguishes between circuit synthesis, post-synthesis optimization, and technology mapping. In this survey, we review algorithmic paradigms --- search-based, cycle-based, transformation-based, and BDD-based --- as well as specific algorithms for reversible synthesis, both exact and heuristic. We conclude the survey by outlining key open challenges in synthesis of reversible and quantum logic, as well as most common misconceptions.Comment: 34 pages, 15 figures, 2 table

Design Methods for Reliable Quantum Circuits

Quantum computing is an emerging technology that has the potential to change the perspectives and applications of computing in general. A wide range of applications are enabled: from faster algorithmic solutions of classically still difficult problems to theoretically more secure communication protocols. A quantum computer uses the quantum mechanical effects of particles or particle-like systems, and a major similarity between quantum and classical computers consists of both being abstracted as information processing machines. Whereas a classical computer operates on classical digital information, the quantum computer processes quantum information, which shares similarities with analog signals. One of the central differences between the two types of information is that classical information is more fault-tolerant when compared to its quantum counterpart. Faults are the result of the quantum systems being interfered by external noise, but during the last decades quantum error correction codes (QECC) were proposed as methods to reduce the effect of noise. Reliable quantum circuits are the result of designing circuits that operate directly on encoded quantum information, but the circuit’s reliability is also increased by supplemental redundancies, such as sub-circuit repetitions. Reliable quantum circuits have not been widely used, and one of the major obstacles is their vast associated resource overhead, but recent quantum computing architectures show promising scalabilities. Consequently the number of particles used for computing can be more easily increased, and that the classical control hardware (inherent for quantum computation) is also more reliable. Reliable quantum circuits haev been investigated for almost as long as general quantum computing, but their limited adoption (until recently) has not generated enough interest into their systematic design. The continuously increasing practical relevance of reliability motivates the present thesis to investigate some of the first answers to questions related to the background and the methods forming a reliable quantum circuit design stack. The specifics of quantum circuits are analysed from two perspectives: their probabilistic behaviour and their topological properties when a particular class of QECCs are used. The quantum phenomena, such as entanglement and superposition, are the computational resources used for designing quantum circuits. The discrete nature of classical information is missing for quantum information. An arbitrary quantum system can be in an infinite number of states, which are linear combinations of an exponential number of basis states. Any nontrivial linear combination of more than one basis states is called a state superposition. The effect of superpositions becomes evident when the state of the system is inferred (measured), as measurements are probabilistic with respect to their output: a nontrivial state superposition will collapse to one of the component basis states, and the measurement result is known exactly only after the measurement. A quantum system is, in general, composed from identical subsystems, meaning that a quantum computer (the complete system) operates on multiple similar particles (subsystems). Entanglement expresses the impossibility of separating the state of the subsystems from the state of the complete system: the nontrivial interactions between the subsystems result into a single indivisible state. Entanglement is an additional source of probabilistic behaviour: by measuring the state of a subsystem, the states of the unmeasured subsystems will probabilistically collapse to states from a well defined set of possible states. Superposition and entanglement are the building blocks of quantum information teleportation protocols, which in turn are used in state-of-the-art fault-tolerant quantum computing architectures. Information teleportation implies that the state of a subsystem is moved to a second subsystem without copying any information during the process. The probabilistic approach towards the design of quantum circuits is initiated by the extension of classical test and diagnosis methods. Quantum circuits are modelled similarly to classical circuits by defining gate-lists, and missing quantum gates are modelled by the single missing gate fault. The probabilistic approaches towards quantum circuits are facilitated by comparing these to stochastic circuits, which are a particular type of classical digital circuits. Stochastic circuits can be considered an emulation of analogue computing using digital components. A first proposed design method, based on the direct comparison, is the simulation of quantum circuits using stochastic circuits by mapping each quantum gate to a stochastic computing sub-circuit. The resulting stochastic circuit is compiled and simulated on FPGAs. The obtained results are encouraging and illustrate the capabilities of the proposed simulation technique. However, the exponential number of possible quantum basis states was translated into an exponential number of stochastic computing elements. A second contribution of the thesis is the proposal of test and diagnosis methods for both stochastic and quantum circuits. Existing verification (tomographic) methods of quantum circuits were targeting the reconstruction of the gate-lists. The repeated execution of the quantum circuit was followed by different but specific measurement at the circuit outputs. The similarities between stochastic and quantum circuits motivated the proposal of test and diagnosis methods that use a restricted set of measurement types, which minimise the number of circuit executions. The obtained simulation results show that the proposed validation methods improve the feasibility of quantum circuit tomography for small and medium size circuits. A third contribution of the thesis is the algorithmic formalisation of a problem encountered in teleportation-based quantum computing architectures. The teleportation results are probabilistic and require corrections represented as quantum gates from a particular set. However, there are known commutation properties of these gates with the gates used in the circuit. The corrections are not applied as dynamic gate insertions (during the circuit’s execution) into the gate-lists, but their effect is tracked through the circuit, and the corrections are applied only at circuit outputs. The simulation results show that the algorithmic solution is applicable for very large quantum circuits. Topological quantum computing (TQC) is based on a class of fault-tolerant quantum circuits that use the surface code as the underlying QECC. Quantum information is encoded in lattice-like structures and error protection is enabled by the topological properties of the lattice. The 3D structure of the lattice allows TQC computations to be visualised similarly to knot diagrams. Logical information is abstracted as strands and strand interactions (braids) represent logical quantum gates. Therefore, TQC circuits are abstracted using a geometrical description, which allows circuit input-output transformations (correlations) to be represented as geometric sub-structures. TQC design methods were not investigated prior to this work, and the thesis introduces the topological computational model by first analysing the necessary concepts. The proposed TQC design stack follows a top-down approach: an arbitrary quantum circuit is decomposed into the TQC supported gate set; the resulting circuit is mapped to a lattice of appropriate dimensions; relevant resulting topological properties are extracted and expressed using graphs and Boolean formulas. Both circuit representations are novel and applicable to TQC circuit synthesis and validation. Moreover, the Boolean formalism is broadened into a formal mechanism for proving circuit correctness. The thesis introduces TQC circuit synthesis, which is based on a novel logical gate geometric description, whose formal correctness is demonstrated. Two synthesis methods are designed, and both use a general planar representation of the circuit. Initial simulation results demonstrate the practicality and performance of the methods. An additional group of proposed design methods solves the problem of automatic correlation construction. The methods use validity criteria which were introduced and analysed beforehand in the thesis. Input-output correlations existing in the circuit are inferred using both the graph and the Boolean representation. The thesis extends the TQC state-of-the-art by recognising the importance of correlations in the validation process: correlation construction is used as a sub-routine for TQC circuit validation. The presented cross-layer validation procedure is useful when investigating both the QECC and the circuit, while a second proposed method is QECC-independent. Both methods are scalable and applicable even to very large circuits. The thesis completes with the analysis of TQC circuit identities, where the developed Boolean formalism is used. The proofs of former known circuit identities were either missing or complex, and the presented approach reduces the length of the proofs and represents a first step towards standardising them. A new identity is developed and detailed during the process of illustrating the known circuit identities. Reliable quantum circuits are a necessity for quantum computing to become reality, and specialised design methods are required to support the quest for scalable quantum computers. This thesis used a twofold approach towards this target: firstly by focusing on the probabilistic behaviour of quantum circuits, and secondly by considering the requirements of a promising quantum computing architecture, namely TQC. Both approaches resulted in a set of design methods enabling the investigation of reliable quantum circuits. The thesis contributes with the proposal of a new quantum simulation technique, novel and practical test and diagnosis methods for general quantum circuits, the proposal of the TQC design stack and the set of design methods that form the stack. The mapping, synthesis and validation of TQC circuits were developed and evaluated based on a novel and promising formalism that enabled checking circuit correctness. Future work will focus on improving the understanding of TQC circuit identities as it is hoped that these are the key for circuit compaction and optimisation. Improvements to the stochastic circuit simulation technique have the potential of spawning new insights about quantum circuits in general

Measurements, Models, Systems and Design

531 s.

QUANTUM COMPUTING AND HPC TECHNIQUES FOR SOLVING MICRORHEOLOGY AND DIMENSIONALITY REDUCTION PROBLEMS

Tesis doctoral en período de exposición públicaDoctorado en Informática (RD99/11)(8908

A Survey of Challenges for Runtime Verification from Advanced Application Domains (Beyond Software)

Runtime verification is an area of formal methods that studies the dynamic analysis of execution traces against formal specifications. Typically, the two main activities in runtime verification efforts are the process of creating monitors from specifications, and the algorithms for the evaluation of traces against the generated monitors. Other activities involve the instrumentation of the system to generate the trace and the communication between the system under analysis and the monitor. Most of the applications in runtime verification have been focused on the dynamic analysis of software, even though there are many more potential applications to other computational devices and target systems. In this paper we present a collection of challenges for runtime verification extracted from concrete application domains, focusing on the difficulties that must be overcome to tackle these specific challenges. The computational models that characterize these domains require to devise new techniques beyond the current state of the art in runtime verification

Reversible Computation: Extending Horizons of Computing

This open access State-of-the-Art Survey presents the main recent scientific outcomes in the area of reversible computation, focusing on those that have emerged during COST Action IC1405 "Reversible Computation - Extending Horizons of Computing", a European research network that operated from May 2015 to April 2019. Reversible computation is a new paradigm that extends the traditional forwards-only mode of computation with the ability to execute in reverse, so that computation can run backwards as easily and naturally as forwards. It aims to deliver novel computing devices and software, and to enhance existing systems by equipping them with reversibility. There are many potential applications of reversible computation, including languages and software tools for reliable and recovery-oriented distributed systems and revolutionary reversible logic gates and circuits, but they can only be realized and have lasting effect if conceptual and firm theoretical foundations are established first

Automated equivalence checking of quantum information systems

Quantum technologies have progressed beyond the laboratory setting and are beginning to make an impact on industrial development. The construction of practical, general purpose quantum computers has been challenging, to say the least. But quantum cryptographic and communication devices have been available in the commercial marketplace for a few years. Quantum networks have been built in various cities around the world, and plans are afoot to launch a dedicated satellite for quantum communication. Such new technologies demand rigorous analysis and verification before they can be trusted in safety and security-critical applications. In this thesis we investigate the theory and practice of equivalence checking of quantum information systems. We present a tool, Quantum Equivalence Checker (QEC), which uses a concurrent language for describing quantum systems, and performs verification by checking equivalence between specification and implementation. For our process algebraic language CCSq, we define an operational semantics and a superoperator semantics. While in general, simulation of quantum systems using current computing technology is infeasible, we restrict ourselves to the stabilizer formalism, in which there are efficient simulation algorithms and representation of quantum states. By using the stabilizer representation of quantum states we introduce various algorithms for testing equality of stabilizer states. In this thesis, we consider concurrent quantum protocols that behave functionally in the sense of computing a deterministic input-output relation for all interleavings of a concurrent system. Crucially, these input-output relations can be abstracted by superoperators, enabling us to take advantage of linearity. This allows us to analyse the behaviour of protocols with arbitrary input, by simulating their operation on a finite basis set consisting of stabilizer states. We present algorithms for the checking of functionality and equivalence of quantum protocols. Despite the limitations of the stabilizer formalism and also the range of protocols that can be analysed using equivalence checking, QEC is applied to specify and verify a variety of interesting and practical quantum protocols from quantum communication and quantum cryptography to quantum error correction and quantum fault tolerant computation, where for each protocol different sequential and concurrent model are defined in CCSq. We also explain the implementation details of the QEC tool and report on the experimental results produced by using it on the verification of a number of case studies

Reversible Computation: Extending Horizons of Computing

This open access State-of-the-Art Survey presents the main recent scientific outcomes in the area of reversible computation, focusing on those that have emerged during COST Action IC1405 "Reversible Computation - Extending Horizons of Computing", a European research network that operated from May 2015 to April 2019. Reversible computation is a new paradigm that extends the traditional forwards-only mode of computation with the ability to execute in reverse, so that computation can run backwards as easily and naturally as forwards. It aims to deliver novel computing devices and software, and to enhance existing systems by equipping them with reversibility. There are many potential applications of reversible computation, including languages and software tools for reliable and recovery-oriented distributed systems and revolutionary reversible logic gates and circuits, but they can only be realized and have lasting effect if conceptual and firm theoretical foundations are established first

Dagstuhl News January - December 2011

"Dagstuhl News" is a publication edited especially for the members of the Foundation "Informatikzentrum Schloss Dagstuhl" to thank them for their support. The News give a summary of the scientific work being done in Dagstuhl. Each Dagstuhl Seminar is presented by a small abstract describing the contents and scientific highlights of the seminar as well as the perspectives or challenges of the research topic

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems