255 research outputs found
On Minimal Second-order IIR Bandpass Filters with Constrained Poles and Zeros
In this paper, several forms of infinite impulse response (IIR) bandpass filters with constrained poles and zeros are presented and compared. The comparison includes the filter structure, the frequency ranges and a number of controlled parameters that affect computational efforts. Using the relationship between bandpass and notch filters, the two presented filters were originally developed for notch filters. This paper also proposes a second-order IIR bandpass filter structure that constrains poles and zeros and can be used as a  minimal parameter adaptive digital second-order filter. The proposed filter has a wider frequency range and more flexibility in the range values of the adaptation parameters
Efficient Schemes for Adaptive Frequency Tracking and their Relevance for EEG and ECG
Amplitude and frequency are the two primary features of one-dimensional signals, and thus both are widely utilized to analysis data in numerous fields. While amplitude can be examined directly, frequency requires more elaborate approaches, except in the simplest cases. Consequently, a large number of techniques have been proposed over the years to retrieve information about frequency. The most famous method is probably power spectral density estimation. However, this approach is limited to stationary signals since the temporal information is lost. Time-frequency approaches were developed to tackle the problem of frequency estimation in non-stationary data. Although they can estimate the power of a signal in a given time interval and in a given frequency band, these tools have two drawbacks that make them less valuable in certain situations. First, due to their interdependent time and frequency resolutions, improving the accuracy in one domain means decreasing it in the other one. Second, it is difficult to use this kind of approach to estimate the instantaneous frequency of a specific oscillatory component. A solution to these two limitations is provided by adaptive frequency tracking algorithms. Typically, these algorithms use a time-varying filter (a band-pass or notch filter in most cases) to extract an oscillation, and an adaptive mechanism to estimate its instantaneous frequency. The main objective of the first part of the present thesis is to develop such a scheme for adaptive frequency tracking, the single frequency tracker. This algorithm compares favorably with existing methods for frequency tracking in terms of bias, variance and convergence speed. The most distinguishing feature of this adaptive algorithm is that it maximizes the oscillatory behavior at its output. Furthermore, due to its specific time-varying band-pass filter, it does not introduce any distortion in the extracted component. This scheme is also extended to tackle certain situations, namely the presence of several oscillations in a single signal, the related issue of harmonic components, and the availability of more than one signal with the oscillation of interest. The first extension is aimed at tracking several components simultaneously. The basic idea is to use one tracker to estimate the instantaneous frequency of each oscillation. The second extension uses the additional information contained in several signals to achieve better overall performance. Specifically, it computes separately instantaneous frequency estimates for all available signals which are then combined with weights minimizing the estimation variance. The third extension, which is based on an idea similar to the first one and uses the same weighting procedure as the second one, takes into account the harmonic structure of a signal to improve the estimation performance. A non-causal iterative method for offline processing is also developed in order to enhance an initial frequency trajectory by using future information in addition to past information. Like the single frequency tracker, this method aims at maximizing the oscillatory behavior at the output. Any approach can be used to obtain the initial trajectory. In the second part of this dissertation, the schemes for adaptive frequency tracking developed in the first part are applied to electroencephalographic and electrcardiographic data. In a first study, the single frequency tracker is used to analyze interactions between neuronal oscillations in different frequency bands, known as cross-frequency couplings, during a visual evoked potential experiment with illusory contour stimuli. With this adaptive approach ensuring that meaningful phase information is extracted, the differences in coupling strength between stimuli with and without illusory contours are more clearly highlighted than with traditional methods based on predefined filter-banks. In addition, the adaptive scheme leads to the detection of differences in instantaneous frequency. In a second study, two organization measures are derived from the harmonic extension. They are based on the power repartition in the frequency domain for the first one and on the phase relation between harmonic components for the second one. These measures, computed from the surface electrocardiogram, are shown to help predicting the outcome of catheter ablation of persistent atrial fibrillation. The proposed adaptive frequency tracking schemes are also applied to signals recorded in the field of sport sciences in order to illustrate their potential uses. To summarize, the present thesis introduces several algorithms for adaptive frequency tracking. These algorithms are presented in full detail and they are then applied to practical situations. In particular, they are shown to improve the detection of coupling mechanisms in brain activity and to provide relevant organization measures for atrial fibrillation
Hybrid DDS-PLL based reconfigurable oscillators with high spectral purity for cognitive radio
Analytical, design and simulation studies on the performance optimization of reconfigurable architecture of a Hybrid DDS – PLL are presented in this thesis. The original contributions of this thesis are aimed towards the DDS, the dithering (spur suppression) scheme and the PLL. A new design of Taylor series-based DDS that reduces the dynamic power and number of multipliers is a significant contribution of this thesis. This thesis compares dynamic power and SFDR achieved in the design of varieties of DDS such as Quartic, Cubic, Linear and LHSC.
This thesis proposes two novel schemes namely “Hartley Image Suppression” and “Adaptive Sinusoidal Interference Cancellation” overcoming the low noise floor of traditional dithering schemes. The simulation studies on a Taylor series-based DDS reveal an improvement in SFDR from 74 dB to 114 dB by using Least Mean Squares -Sinusoidal Interference Canceller (LM-SIC) with the noise floor maintained at -200 dB.
Analytical formulations have been developed for a second order PLL to relate the phase noise to settling time and Phase Margin (PM) as well as to relate jitter variance and PM. New expressions relating phase noise to PM and lock time to PM are derived. This thesis derives the analytical relationship between the roots of the characteristic equation of a third order PLL and its performance metrics like PM, Gardner’s stability factor, jitter variance, spur gain and ratio of noise power to carrier power. This thesis presents an analysis to relate spur gain and capacitance ratio of a third order PLL. This thesis presents an analytical relationship between the lock time and the roots of its characteristic equation of a third order PLL. Through Vieta’s circle and Vieta’s angle, the performance metrics of a third order PLL are related to the real roots of its characteristic equation
Recommended from our members
Adaptive techniques in signal processing and connectionist models
This thesis covers the development of a series of new methods and the application of
adaptive filter theory which are combined to produce a generalised adaptive filter system
which may be used to perform such tasks as pattern recognition. Firstly, the relevant
background adaptive filter theory is discussed in Chapter 1 and methods and results which are important to the rest of the thesis are derived or referenced. Chapter 2 of this thesis covers the development of a new adaptive algorithm which is designed to give faster convergence than the LMS algorithm but unlike the Recursive Least Squares family of algorithms it does not require storage of a matrix with n2 elements, where n is the number of filter taps. In Chapter 3 a new extension of the LMS adaptive notch filter is derived and applied which gives an adaptive notch filter the ability to lock and track signals of varying pitch without sacrificing notch depth. This application of the LMS filter is of interest as it demonstrates a time varying filter solution to a stationary problem. The
LMS filter is next extended to the multidimensional case which allows the application
of LMS filters to image processing. The multidimensional filter is then applied to the
problem of image registration and this new application of the LMS filter is shown to have significant advantages over current image registration methods. A consideration of
the multidimensional LMS filter as a template matcher and pattern recogniser is given.
In Chapter 5 a brief review of statistical pattern recognition is given, and in Chapter 6 a review of relevant connectionist models. In Chapter 7 the generalised adaptive filter is derived. This is an adaptive filter with the ability to model non-linear input-output
relationships. The Volterra functional analysis of non-linear systems is given and this is
combined with adaptive filter methods to give a generalised non-linear adaptive digital
filter. This filter is then considered as a linear adaptive filter operating in a non-linearly
extended vector space. This new filter is shown to have desirable properties as a pattern
recognition system. The performance and properties of the new filter is compared with current connectionist models and results demonstrated in Chapter 8. In Chapter 9 further mathematical analysis of the networks leads to suggested methods to greatly
reduce network complexity for a given problem by choosing suitable pattern classification indices and allowing it to define its own internal structure. In Chapter 10 robustness of the network to imperfections in its implementation is considered. Chapter 11 finishes the thesis with some conclusions and suggestions for future work.Science and Engineering Research Council; Dr W. Fitzgerald; Marconi
The Viking seismometry
Efforts were made to determine the seismicity of Mars as well as define its internal structure by detecting vibrations generated by marsquakes and meteoroid impacts. The lack of marsquakes recognized in the Viking data made it impossible to make any direct inferences about the interior of Mars and only allowed the setting of upper bounds on the seismic activity of the planet. After obtaining more than 2100 hours worth of data during the quite periods at rates of one sample per second or higher, the Viking 2 seismometer was turned off as a consequence of a landing system failure. During the periods when adequate data were obtained, one event of possible seismic or meteoroid impact origin was recognized; however, there is a significant probability that this event was generated by a wind gust
The Telecommunications and Data Acquisition Report
This quarterly publication provides archival reports on developments in programs in space communications, radio navigation, radio science, and ground-based radio and radar astronomy. It reports on activities of the Deep Space Network (DSN) in planning, supporting research and technology, implementation, and operations. Also included are standardization activities at the Jet Propulsion Laboratory for space data and information systems
Long Stroke FTS
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.Includes bibliographical references (p. 375-384).In this thesis, I detail the design and control of a linear long stroke fast tool servo (FTS) with integral balance mass. The long stroke fast tool servo consists of an air bearing stage driven by a unique three phase oil cooled linear motor. The linear FTS has a travel range of 25 mm and is capable of 100 m/s² accelerations. The FTS is mounted to a T-base diamond turning machine (DTM). The FTS is attached to a hydrostatic bearing supported in-feed stage which is driven by a second linear motor. The in-feed stage is allowed to move in response to the FTS actuation forces and thus acts as an integral balance mass. We have developed a unique control structure to control the position of both the FTS and the reaction mass. The FTS controller employs a conventional lead-lag inner loop, an adaptive feedforward cancelation (AFC) outer loop, and command pre-shifting. For the FTS controller, the AFC resonators are placed in the forward path which creates infinite gain at the resonator frequency. The controller for the hydrostatic stage consists of a conventional lead-lag control inner-loop and a base acceleration feedback controller. The acceleration feedback controller consists of a high-pass filter, a double integrator for phase compensation, and an array of AFC resonators. For the base acceleration controller, the AFC resonators are placed in the feedback path and thus act as narrow-frequency notch filters. The notch filters allow the hydrostatic stage/balance mass to move freely at the commanded trajectory harmonics thus attenuating the forces introduced into the DTM. The AFC control loops are designed using a new loop shaping perspective for AFC control. In this thesis, we present two extensions to AFC control.(cont.) The first extension called Oscillator Amplitude Control (OAC) is used to approximate the convergence characteristics of an AFC controller. The second extension termed Amplitude Modulated Adaptive Feedforward Cancelation (AMAFC) is designed to exactly cancel disturbances with a time varying amplitude.by Marten F. Byl.Ph.D
Geostationary Operational Environmental Satellite (GOES-N report). Volume 2: Technical appendix
The contents include: operation with inclinations up to 3.5 deg to extend life; earth sensor improvements to reduce noise; sensor configurations studied; momentum management system design; reaction wheel induced dynamic interaction; controller design; spacecraft motion compensation; analog filtering; GFRP servo design - modern control approach; feedforward compensation as applied to GOES-1 sounder; discussion of allocation of navigation, inframe registration and image-to-image error budget overview; and spatial response and cloud smearing study
- …