A survey on fractional order control techniques for unmanned aerial and ground vehicles

In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

Hybrid Electric Distributed Propulsion for Vertical Takeoff and Landing Aircraft

This research effort explores the interactions between aerodynamics and hybridelectric power system (HEPS) design and control for vertical takeoff and landing (VTOL) aircraft applications. Specifically, this research focuses on embedded distributed electric propulsion systems, for which the aerodynamic forces and moments are inextricably linked to power input. This effort begins by characterizing the performance of two similar embedded propulsion systems using computational fluid dynamics (CFD). From this initial analysis, a wind tunnel model is constructed and the systems are tested across the operating conditions required to characterize the performance of a VTOL aircraft, where 0 deg ≤ α ≤ 90 deg. One of these configurations is selected for evaluating the interaction with the hybrid-power system. An experimental HEPS is constructed based on a small two-stroke internal combustion engine as well, with a rated continuous power output of 2kW. This experiment is used to develop a validated dynamical HEPS model in MATLAB and Simulink, where the control systems are refined and the performance of the system is extended to accommodate the VTOL power demand during transitional flight. A robust control design is developed using a second order sliding mode controller (2-SMC), implemented using the super-twisting algorithm and integrated with classical linear control schemes in an interleaved-cascade architecture. The resulting system has a variable voltage output and a robust response to rapid changes in power demand. Additionally, the HEPS is also demonstrated to fully utilize the mechanical power output capability of the two-stroke engine. Ultimately, the HEPS is demonstrated, via the dynamical model, to be capable of supplying power for an embedded propulsion VTOL aircraft. This performance is further extended with the addition of an actively controlled slack bus, utilizing battery energy storage and a buck-converter integrated with the HEPS control system. In this configuration, the peak power demands of the system can exceed the maximum sustained power threshold (MSPT) of the HEPS

Nonlinear Feedback Control of Axisymmetric Aerial Vehicles

We investigate the use of simple aerodynamic models for the feedback control of aerial vehicles with large flight envelopes. Thrust-propelled vehicles with a body shape symmetric with respect to the thrust axis are considered. Upon a condition on the aerodynamic characteristics of the vehicle, we show that the equilibrium orientation can be explicitly determined as a function of the desired flight velocity. This allows for the adaptation of previously proposed control design approaches based on the thrust direction control paradigm. Simulation results conducted by using measured aerodynamic characteristics of quasi-axisymmetric bodies illustrate the soundness of the proposed approach

Tools for Nonlinear Control Systems Design

This is a brief statement of the research progress made on Grant NAG2-243 titled "Tools for Nonlinear Control Systems Design", which ran from 1983 till December 1996. The initial set of PIs on the grant were C. A. Desoer, E. L. Polak and myself (for 1983). From 1984 till 1991 Desoer and I were the Pls and finally I was the sole PI from 1991 till the end of 1996. The project has been an unusually longstanding and extremely fruitful partnership, with many technical exchanges, visits, workshops and new avenues of investigation begun on this grant. There were student visits, long term.visitors on the grant and many interesting joint projects. In this final report I will only give a cursory description of the technical work done on the grant, since there was a tradition of annual progress reports and a proposal for the succeeding year. These progress reports cum proposals are attached as Appendix A to this report. Appendix B consists of papers by me and my students as co-authors sorted chronologically. When there are multiple related versions of a paper, such as a conference version and journal version they are listed together. Appendix C consists of papers by Desoer and his students as well as 'solo' publications by other researchers supported on this grant similarly chronologically sorted

Unified Dynamics and Control of a Robot Manipulator Mounted on a VTOL Aircraft Platform

An innovative type of mobile manipulator, designated Manipulator on VTOL (Vertical Take-Off and Landing) Aircraft (MOVA), is proposed as a potential candidate for autonomous execution of field work in less-structured indoor and outdoor environments. Practical use of the MOVA system requires a unified controller that addresses the coupled and complex dynamics of the composite system; especially the interaction of the robotic manipulator with the aircraft airframe. Model-based controller design methods require explicit dynamics models of the MOVA system. Preliminary investigation of a two-dimensional MOVA system toward a dynamics model and controller design is presented in preparation for developing the controller of the more complex MOVA system in 3D space. Dynamics of the planar MOVA system are derived using the Lagrangian approach and then transforming the result into a form that facilitates controller design using the concept of a virtual manipulator. A MOVA end-effector trajectory tracking controller was designed with the transformed dynamics equation using the integrator back-stepping control design framework. Validity of the controller is shown via stability analysis, simulation results, and results from a physical test-bed. A systematic approach is illustrated for the derivation of the 3D MOVA system dynamics equations. The resulting dynamics equations are represented abstractly in the standard robot dynamics form and proven to have the skew-symmetric property, which is a useful property for control derivation. An open source Mathematica program was developed to achieve automatic symbolic derivation of the MOVA system dynamics. Accessory tools were also designed to create a tool-chain that starts with an Autodesk Inventor CAD drawing, generates input to the Mathematica program, and then formats the output for direct use in MATLAB and Simulink. A unified nonlinear control algorithm that controls the 3D MOVA system, including both the aircraft and the onboard manipulator, as a single entity was developed to achieve trajectory tracking of the MOVA end-effector position and attitude based on the explicit dynamics equation. Globally Uniformly Ultimately Bounded (GUUB) stability is proven for the controller using Lyapunov-type stability analysis. Physical testing was constructed in order to to demonstrate the performance of the proposed controller on a MOVA system with a two-link onboard manipulator

Bounded Coordination Control of Second-order Dynamic Agents

This paper presents a constructive design of distributed and bounded coordination controllers that force mobile agents with second-order dynamics to track desired trajectories and to avoid collision between them. The control design is based on the new bounded control design technique for second-order systems, and new pairwise collision avoidance functions. The pair wise collision functions are functions of both the relative position and velocity of the agents instead of only the relative position as in the literature. Desired features of the proposed control design include:1) Boundedness of the control inputs by a predefined bound despite collision avoidance between the agentsconsidered,2) No collision between any agents,3) Asymptotical stability of desired equilibrium set, and4) Instability of all other undesired critical sets of the closed loop system. The proposed control design is then applied to design a coordination control system for a group of vertical take-off and landing (VTOL) aircraft

Validation of Quad Tail-sitter VTOL UAV Model in Fixed Wing Mode

Vertical take-off and landing (VTOL) is a type of unmanned aerial vehicle (UAV) that is growing rapidly because its ability to take off and land anywhere in tight spaces. One type of VTOL UAV, the tail-sitter, has the best efficiency. However, besides the efficiency offered, some challenges must still be overcome, including the complexity of combining the ability to hover like a helicopter and fly horizontally like a fixed-wing aircraft. This research has two contributions: in the form of how the analytical model is generated and the tools used (specifically for the small VTOL quad tail-sitter UAV) and how to utilize off-the-shelf components for UAV empirical modeling. This research focuses on increasing the speed and accuracy of the UAV VTOL control design in fixed-wing mode. The first step is to carry out analysis and simulation. The model is analytically obtained using OpenVSP in longitudinal and lateral modes. The next step is to realize this analytical model for both the aircraft and the controls. The third step is to measure the flight characteristics of the aircraft. Based on the data recorded during flights, an empirical model is made using system identification technique. The final step is to vali-date the analytical model with the empirical model. The results show that the characteristics of the analytical mode fulfill the specified requirements and are close to the empirical model. Thus, it can be concluded that the analytical model can be implemented directly, and consequently, the VTOL UAV design and development process has been shortened

PID vs LQR controller for tilt rotor airplane

The main thematic of this paper is controlling the main manoeuvers of a tilt rotor UAV airplane in several modes such as vertical takeoff and landing, longitudinal translation and the most important phase which deal with the transition from the helicopter mode to the airplane mode and visversa based on a new actuators combination technique for specially the yaw motion with not referring to rotor speed control strategy which is used in controlling the attitude of a huge number of vehicles nowadays. This new actuator combination is inspired from that the transient response of a trirotor using tilting motion dynamics provides a faster response than using rotor speed dynamics. In the literature, a lot of control technics are used for stabilizing and guarantee the necessary manoeuvers for executing such task, a multiple Attitude and Altitude PID controllers were chosen for a simple linear model of our tilt rotor airplane in order to fulfill the desired trajectory, for reasons of complexity of our model the multiple PID controller doesnt take into consideration all the coupling that exists between the degrees of freedom in our model, so an LQR controller is adopted for more feasible solution of complex manoeuvering, the both controllers need linearization of the model for an easy implementation

Real-time UAV Complex Missions Leveraging Self-Adaptive Controller with Elastic Structure

The expectation of unmanned air vehicles (UAVs) pushes the operation environment to narrow spaces, where the systems may fly very close to an object and perform an interaction. This phase brings the variation in UAV dynamics: thrust and drag coefficient of the propellers might change under different proximity. At the same time, UAVs may need to operate under external disturbances to follow time-based trajectories. Under these challenging conditions, a standard controller approach may not handle all missions with a fixed structure, where there may be a need to adjust its parameters for each different case. With these motivations, practical implementation and evaluation of an autonomous controller applied to a quadrotor UAV are proposed in this work. A self-adaptive controller based on a composite control scheme where a combination of sliding mode control (SMC) and evolving neuro-fuzzy control is used. The parameter vector of the neuro-fuzzy controller is updated adaptively based on the sliding surface of the SMC. The autonomous controller possesses a new elastic structure, where the number of fuzzy rules keeps growing or get pruned based on bias and variance balance. The interaction of the UAV is experimentally evaluated in real time considering the ground effect, ceiling effect and flight through a strong fan-generated wind while following time-based trajectories.Comment: 18 page