179 research outputs found

    Design guidelines for spatial modulation

    No full text
    A new class of low-complexity, yet energyefficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO) has emerged. These systems are capable of exploiting the spatial dimensions (i.e. the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication whilst relying on a single-Radio Frequency (RF) chain. Moreover, SM may also be viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/ cooperative protocol design issues, and on their meritorious variants

    Air Interface for Next Generation Mobile Communication Networks: Physical Layer Design:A LTE-A Uplink Case Study

    Get PDF

    Design a New Tomlinson-Harashima Non-Linear Pre-Coding Technique for MIMO WiMAX-OFDM Based on Wavelet Signals in Transmit-Antenna

    Get PDF
    This paper investigates a new technique to the adaptation  the Tomlinson-Harashima non-linear  Pre-coding (THP)  in  the WiMAX baseband, in the physical layer performance of multi-antenna techniques, All cases are based on the IEEE 802.16d standard using OFDM based Wavelet and QPSK (¾) of coding rates. The proposed pre-coding only requires the statistical knowledge of the channel at the transmitter, which significantly reduces the feedback requirements. Both linear and non-linear pre-coders amend the system bit error rate for WiMAX OSTBC DWT OFDM in transmit-antenna and path-correlated channels. The proposed non-linear pre-coder in closed loop design achieved much lower bit error rates, increased signal-to-noise power ratio (SNR) than linear pre-coder. Keywords: WiMAX, THP, OFDM, DWT, MIMO, OSTBC

    Técnicas de equalização e pré-codificação para sistemas MC-CDMA

    Get PDF
    Mestrado em Engenharia Eletrónica e TelecomunicaçõesO número de dispositivos com ligações e aplicações sem fios está a aumentar exponencialmente, causando problemas de interferência e diminuindo a capacidade do sistema. Isto desencadeou uma procura por uma eficiência espectral superior e, consequentemente, tornou-se necessário desenvolver novas arquitecturas celulares que suportem estas novas exigências. Coordenação ou cooperação multicelular é uma arquitectura promissora para sistemas celulares sem fios. Esta ajuda a mitigar a interferência entre células, melhorando a equidade e a capacidade do sistema. É, portanto, uma arquitectura já em estudo ao abrigo da tecnologia LTE-Advanced sob o conceito de coordenação multiponto (CoMP). Nesta dissertação, considerámos um sistema coordenado MC-CDMA com pré-codificação e equalização iterativas. Uma das técnicas mais eficientes de pré-codificação é o alinhamento de interferências (IA). Este é um conceito relativamente novo que permite aumentar a capacidade do sistema em canais de elevada interferência. Sabe-se que, para os sistemas MC-CDMA, os equalizadores lineares convencionais não são os mais eficientes, devido à interferência residual entre portadoras (ICI). No entanto, a equalização iterativa no domínio da frequência (FDE) foi identificada como sendo uma das técnicas mais eficientes para lidar com ICI e explorar a diversidade oferecida pelos sistemas MIMO MC-CDMA. Esta técnica é baseada no conceito Iterative Block Decision Feedback Equalization (IB-DFE). Nesta dissertação, é proposto um sistema MC-CDMA que une a pré-codificação iterativa do alinhamento de interferências no transmissor ao equalizador baseado no IB-DFE, com cancelamento sucessivo de interferências (SIC) no receptor. Este é construído por dois blocos: um filtro linear, que mitiga a interferência inter-utilizador, seguido por um bloco iterativo no domínio da frequência, que separa eficientemente os fluxos de dados espaciais na presença de interferência residual inter-utilizador alinhada. Este esquema permite atingir o número máximo de graus de liberdade e permite simultaneamente um ganho óptimo de diversidade espacial. O desempenho deste esquema está perto do filtro adaptado- Matched Filter Bound (MFB).The number of devices with wireless connections and applications is increasing exponentially, causing interference problems and reducing the system’s capacity gain. This initiated a search for a higher spectral efficiency and therefore it became necessary to develop new cellular architectures that support these new requirements. Multicell cooperation or coordination is a promising architecture for cellular wireless systems to mitigate intercell interference, improving system fairness and increasing capacity, and thus is already under study in LTE-Advanced under the coordinated multipoint (CoMP) concept. In this thesis, efficient iterative precoding and equalization is considered for coordinated MC-CDMA based systems. One of the most efficient precoding techniques is interference alignment (IA), which is a relatively new concept that allows high capacity gains in interfering channels. It is well known that for MC-CDMA systems standard linear equalizers are not the most efficient due to residual inter carrier interference (ICI). However, iterative frequency-domain equalization (FDE) has been identified as one of the most efficient technique to deal with ICI and exploit the inherent space-frequency diversity of the MIMO MC-CDMA systems, namely the one based on Iterative Block Decision Feedback Equalization (IB-DFE) concept. In this thesis, it is proposed a MC-CDMA system that joins iterative IA precoding at the transmitter with IB-DFE successive interference cancellation (SIC) based receiver structure. The receiver is implemented in two steps: a linear filter, which mitigates the inter-user aligned interference, followed by an iterative frequency-domain receiver, which efficiently separates the spatial streams in the presence of residual inter-user aligned interference. This scheme provides the maximum degrees of freedom (DoF) and allows almost the optimum space-diversity gain. The scheme performance is close to the matched filter bound (MFB)

    Técnicas de equalização para MIMO massivo com amplificação não linear

    Get PDF
    The dawn of the new generation of mobile communications and the trafic explosion that derives from its implementation pose great challenge. The milimeter wave band and the use of massive number of antennas are technologies which, when combined, allow the transmission of high data rate, functioning in zones of the electromagnetic spectrum that are less explored and with capability of allocation of dozens of GHz of bandwidth. In this dissertation we consider a massive MIMO millimeter wave system employing a hybrid architecture, i.e., the number of transmit and receive antennas are lower than the number of radio frequency chains. As consequence, the precoder and equalizers should be designed in both digital and analog domains. In the literature, most of the proposed hybrid beamforming schemes were evaluated without considering the effects of nonlinear amplifications. However, these systems face non-avoidable nonlinear effects due to power amplifiers functioning in nonlinear regions. The strong nonlinear effects throughout the transmission chain will have a negative impact on the overall system performance and thus its study and the design of equalizers that take into account these effects are of paramount importance. This dissertation proposes a hybrid iterative equalizer for massive MIMO millimeter wave SC-FDMA systems. The user terminals have low complexity, just equipped with analog precoders based on average angle of departure, each with a single radio frequency chain. At the base station it is designed an hybrid analog-digital iterative equalizer with fully connected architecture in order to eliminate both the multi-user interference and the nonlinear distortion caused by signal amplification during the transmission. The equalizer is optimized by minimizing the bit error rate, which is equivalent to minimize the mean square error rate. The impact of the saturation threshold of the amplifiers in the system performance is analysed, and it is demonstrated that the iterative process can efficiently remove the multi-user interference and the distortion, improving the overall system performance.O surgimento de uma nova geração de comunicações móveis e a explosão de tráfego que advém da sua implementação apresenta grandes desafios. A banda de ondas milimétricas e o uso massivo de antenas são tecnologias que, combinadas, permitem atingir elevadas taxas de transmissão, funcionando em zonas do espectro electromagnético menos exploradas e com capacidade de alocação de dezenas de GHz para largura de banda. Nesta dissertação foi considerado um sistema de MIMO massivo de ondas milimétricas usando uma arquitectura híbrida, i.e., o número de antenas para transmissão e recepção é menor que o número de cadeias de radiofrequência. Consequentemente, o pré-codificador e equalizadores devem ser projectados nos domínios digital e analógico. Na literatura, a maioria dos esquemas híbridos de beamforming são avaliados sem ter em conta os efeitos de não linearidade da amplificação do sinal. No entanto, estes sistemas sofrem inevitavelmente de efeitos não lineares devido aos amplificadores de potência operarem em regiões não lineares. Os fortes efeitos das não-linearidades ao longo da cadeia de transmissão têm um efeito nefasto no desempenho do sistema e portanto o seu estudo e projecto de equalizadores que tenham em conta estes efeitos são de extrema importância. Esta dissertação propõe um equalizador híbrido para sistemas baseados em ondas milimétricas para MIMO massivo com modulação SC-FDMA. Os terminais de utilizador possuem baixa complexidade, equipados apenas com pré-codificadores analógicos baseados no ângulo médio de partida, cada um com uma única cadeia de radiofrequência. Na estação base é projectado um equalizador iterativo híbrido analógico-digital com arquitectura completamente conectada de modo a eliminar a interferencia multi-utilizador e a distorção causada pela amplificação do sinal aquando da transmissão. O equalizador é optimizado minimizando a taxa de erro de bit, o que é equivalente a minimizar a taxa de erro quadrático médio. O impacto do limiar de saturação dos amplificadores no desempenho do sistema é analisado, e é demonstrado que o processo iterativo consegue eliminar de modo eficiente a interferência multi-utilizador e a distorção, melhorando o desempenho do sistema.Mestrado em Engenharia Eletrónica e Telecomunicaçõe

    Un-coordinated multi-user and inter-cell interference alignment based on partial and outdated information for large cellular networks

    Get PDF
    The cellular networks have gone through rapid evolution during the past decade. However, their performance is still limited due to the problem of interference. Therefore, interference management in current and future cellular networks is still an ongoing research topic. Interference Alignment is one of the techniques to manage the interference efficiently by using "align" and "suppression" strategy. In the first part of this thesis we focus on Coordinated inter cell interference alignment in a large cellular network. We assess the performance of interference alignment based transmit precoding under specific receiver strategies and coordination scenarios by comparing with different state of the art precoding schemes. We continue our assessment by considering imperfect channel state information at the transmitter. The results show that the gains of coordinated alignment based transmission are very sensitive to the receiver strategies and imperfections as compared to the other precoding schemes. However, in case of the availability of good channel conditions with very slow moving users, coordinated interference alignment outperforms the other baselines even with imperfect channel state information. In addition to that, we propose efficient user selection methods to enhance the performance of coordinated alignment. The results of our assessment draws important conclusions about the application of coordinated interference alignment in practical systems. In the second part of the thesis we consider a cellular system where each cell is serving multiple users simultaneously using the same radio resource. In this scenario, we have to manage not only the inter cell interference but also the multi user interference. For this purpose, we propose a novel Uncoordinated transmit precoding scheme for multi user cellular networks which is based on the alignment of multi user interference with partial and outdated inter cell interference. We show analytically that our scheme approaches the performance optimal transmission scheme. With the help of simulations we show that our proposal outperforms the state of the art non-alignment based multi user transmit precoding schemes We further propose user selection methods which exploit the diversity gains and improve the system spectral efficiency. In order to assess the feasibility of our proposal in a real system, we evaluate our scheme with practical constraints like imperfect information at the transmitter and limited feedback in uplink channel. For the proof of concept we also evaluate the performance of our scheme with measured channels using a software defined measurement platform. Finally, we also assess the application of our proposal in future heterogeneous networks. The outcome of our efforts states that as an interference alignment based transmission scheme, our scheme is a good candidate to manage the two dimensional interference in multi user cellular networks. It outperforms the non-alignment baselines in many scenarios even with practical constraints

    Adjustable dynamic range for paper reduction schemes in large-scale MIMO-OFDM systems

    Get PDF
    In a multi-input-multi-output (MIMO) communication system there is a necessity to limit the power that the output antenna amplifiers can deliver. Their signal is a combination of many independent channels, so the demanded amplitude can peak to many times the average value. The orthogonal frequency division multiplexing (OFDM) system causes high peak signals to occur because many subcarrier components are added by an inverse discrete Fourier transformation process at the base station. This causes out-of-band spectral regrowth. If simple clipping of the input signal is used, there will be in-band distortions in the transmitted signals and the bit error rate will increase substantially. This work presents a novel technique that reduces the peak-to-average power ratio (PAPR). It is a combination of two main stages, a variable clipping level and an Adaptive Optimizer that takes advantage of the channel state information sent from all users in the cell. Simulation results show that the proposed method achieves a better overall system performance than that of conventional peak reduction systems in terms of the symbol error rate. As a result, the linear output of the power amplifiers can be minimized with a great saving in cost

    INTERFERENCE MANAGEMENT IN LTE SYSTEM AND BEYOUND

    Get PDF
    The key challenges to high throughput in cellular wireless communication system are interference, mobility and bandwidth limitation. Mobility has never been a problem until recently, bandwidth has been constantly improved upon through the evolutions in cellular wireless communication system but interference has been a constant limitation to any improvement that may have resulted from such evolution. The fundamental challenge to a system designer or a researcher is how to achieve high data rate in motion (high speed) in a cellular system that is intrinsically interference-limited. Multi-antenna is the solution to data on the move and the capacity of multi-antenna system has been demonstrated to increase proportionally with increase in the number of antennas at both transmitter and receiver for point-to-point communications and multi-user environment. However, the capacity gain in both uplink and downlink is limited in a multi-user environment like cellular system by interference, the number of antennas at the base station, complexity and space constraint particularly for a mobile terminal. This challenge in the downlink provided the motivation to investigate successive interference cancellation (SIC) as an interference management tool LTE system and beyond. The Simulation revealed that ordered successive interference (OSIC) out performs non-ordered successive interference cancellation (NSIC) and the additional complexity is justified based on the associated gain in BER performance of OSIC. The major drawback of OSIC is that it is not efficient in network environment employing power control or power allocation. Additional interference management techniques will be required to fully manage the interference.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

    Low complexity detection for SC-FDE massive MIMO systems

    Get PDF
    Nowadays we continue to observe a big and fast growth of wireless com-munication usage due to the increasing number of access points, and fields of application of this technology. Furthermore, these new usages can require higher speed and better quality of service in order to create market. As example we can have: live 4K video transmission, M2M (Machine to Machine communication), IoT (Internet of Things), Tactile Internet, between many others. As a consequence of all these factors, the spectrum is getting overloaded with communications, increasing the interference and affecting the system's per-formance. Therefore a different path of ideas has been followed and the commu-nication process has been taken to the next level in 5G by the usage of big arrays of antennas and multi-stream communication (MIMO systems) which in a greater scale are called massive MIMO schemes. These systems can be combined with an SC-FDE (Single-Carrier Frequency Domain Equalization) scheme to im-prove the power efficiency due to the low envelope fluctuations. This thesis focused on the equalization in massive MIMO systems, more specifically in the FDE (Frequency Domain Equalization), studying the perfor-mance of different approaches, namely ZF (Zero Forcing), EGD (Equal Gain De-tector), MRD (Maximum Ratio Detector), IB-DFE (Iterative Block Decision Feed-back Equalizer) and a proposed receiver combining MRD (or EGD) and IB-DFE.With this approach we want to minimize the ICI (Inter Carrier Interference) in order to have almost independent data streams and to produce a low complexity code, so that the receiver's performance doesn't affect the total system's perfor-mance, with a final objective of increasing the data throughput in a great scale
    corecore