11 research outputs found
On the Performance of MIMO-ARQ Systems with Channel State Information at the Receiver
This paper investigates the performance of multiple-input-multiple-output (MIMO) systems in the presence of automatic repeat request (ARQ) feedback. We show that, for a large range of performance metrics, the data transmission efficiency of the ARQ schemes is determined by a set of parameters which are scheme-dependent and not metric-dependent. Then, the results are used to study different aspects of MIMO-ARQ such as the effect of nonlinear power amplifiers, large-scale MIMO-ARQ, adaptive power allocation and different data communication models. The results, which are valid for various forward and feedback channel models, show the efficiency of the MIMO-ARQ techniques in different conditions
Distributed Space-Time Coding Techniques with Limited Feedback in Cooperative MIMO Networks
DSTC designs with high diversity and coding gains and efficient detection and code matrices optimization algorithms in cooperative MIMO networks are proposed in this thesis. Firstly, adaptive power allocation (PA) algorithms with different criteria for a cooperative MIMO system equipped with DSTC schemes are proposed and evaluated. Linear receive filter and maximum likelihood (ML) detection are considered with amplify-and-forward (AF) and decode-and-forward (DF) cooperation strategies. In the proposed algorithms, the elements in the PA matrices are optimized at the destination node and then transmitted back to the relay nodes via a feedback channel. Linear minimum mean square error (MMSE) receive filter expressions and the PA matrices depend on each other and are updated iteratively. Stochastic gradient (SG) algorithms are developed with reduced detection complexity. Secondly, an DSTC scheme is proposed for two-hop cooperative MIMO networks. An adjustable code matrix obtained by a feedback channel is employed to transform the space-time coded matrix at the relay node. The effects of the limited feedback and the feedback errors are assessed. An upper bound on the pairwise error probability analysis is derived and indicates the advantage of employing the adjustable code matrices at the relay nodes. An alternative optimization algorithm for the adaptive DSTC scheme is also derived in order to eliminate the need for feedback. Thirdly, an adaptive delay-tolerant DSTC (DT-DSTC) scheme is proposed for two-hop cooperative MIMO networks. An ML receiver and adjustable code matrices are considered for different DSTC configuration schemes subject to a power constraint with a DF cooperation strategy. An upper bound on the pairwise error probability and rank criteria analysis are derived and indicates the advantage of the proposed coding algorithm. Adaptive DT-DSTC algorithms are extended to the cooperative MIMO systems using an AF strategy and opportunistic relaying algorithms in order to achieve a delay-tolerant coding scheme combined with the optimal power allocation strategies
On multiple-antenna communications: signal detection, error exponent and and quality of service
Motivated by the demand of increasing data rate in wireless communication,
multiple-antenna communication is becoming a key technology in the next generation
wireless system. This dissertation considers three different aspects of multipleantenna
communication.
The first part is signal detection in the multiple-input multiple-output (MIMO)
communication. Some low complexity near optimal detectors are designed based on
an improved version of Bell Laboratories Layered Space-Time (BLAST) architecture
detection and an iterative space alternating generalized expectation-maximization
(SAGE) algorithm. The proposed algorithms can almost achieve the performance of
optimal maximum likelihood detection. Signal detections without channel knowledge
(noncoherent) and with co-channel interference are also investigated. Novel solutions
are proposed with near optimal performance.
Secondly, the error exponent of the distributed multiple-antenna communication
(relay) in the windband regime is computed. Optimal power allocation between the
source and relay node, and geometrical relay node placement are investigated based
on the error exponent analysis.
Lastly, the quality of service (QoS) of MIMO/single-input single- output(SISO)
communication is studied. The tradeoff of the end-to-end distortion and transmission
buffer delay is derived. Also, the SNR exponent of the distortion is computed for MIMO communication, which can provide some insights of the interplay among time
diversity, space diversity and the spatial multiplex gain
Ultra Wideband
Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations
Non-binary LDPC coded STF-MIMO-OFDM with an iterative joint receiver structure
The aim of the dissertation was to design a realistic, low-complexity non-binary (NB) low density parity check (LDPC) coded space-time-frequency (STF) coded multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) system with an iterative joint decoder and detector structure at the receiver. The goal of the first part of the dissertation was to compare the performance of different design procedures for NB-LDPC codes on an additive white Gaussian noise (AWGN) channel, taking into account the constraint on the code length. The effect of quantisation on the performance of the code was also analysed. Different methods for choosing the NB elements in the parity check matrix were compared. For the STF coding, a class of universal STF codes was used. These codes use linear pre-coding and a layering approach based on Diophantine numbers to achieve full diversity and a transmission rate (in symbols per channel use per frequency) equal to the number of transmitter antennas. The study of the system considers a comparative performance analysis of di erent ST, SF and STF codes. The simulations of the system were performed on a triply selective block fading channel. Thus, there was selectivity in the fading over time, space and frequency. The effect of quantisation at the receiver on the achievable diversity of linearly pre-coded systems (such as the STF codes used) was mathematically derived and verified with simulations. A sphere decoder (SD) was used as a MIMO detector. The standard method used to create a soft-input soft output (SISO) SD uses a hard-to-soft process and the max-log-map approximation. A new approach was developed which combines a Hopfield network with the SD. This SD-Hopfield detector was connected with the fast Fourier transform belief propagation (FFT-BP) algorithm in an iterative structure. This iterative system was able to achieve the same bit error rate (BER) performance as the original SISO-SD at a reduced complexity. The use of the iterative Hopfield-SD and FFT-BP decoder system also allows performance to be traded off for complexity by varying the number of decoding iterations. The complete system employs a NB-LDPC code concatenated with an STF code at the transmitter with a SISO-SD and FFT-BP decoder connected in an iterative structure at the receiver. The system was analysed in varying channel conditions taking into account the effect of correlation and quantisation. The performance of different SF and STF codes were compared and analysed in the system. An analysis comparing different numbers of FFT-BP and outer iterations was also done. AFRIKAANS : Die doel van die verhandeling was om ’n realistiese, lae-kompleksiteit nie-binˆere (NB) LDPC gekodeerde ruimte-tyd-frekwensie-gekodeerde MIMO-OFDM-sisteem met iteratiewe gesamentlike dekodeerder- en detektorstrukture by die ontvanger te ontwerp. Die eerstem deel van die verhandeling was om die werkverrigting van verskillende ontwerpprosedures vir NB-LDPC kodes op ’n gesommeerde wit Gausruiskanaal te vergelyk met inagneming van die beperking op die lengte van die kode. Verskillende metodes om die nie-bineêre elemente in die pariteitstoetsmatriks te kies, is gebruik. Vir die ruimte-tyd-frekwensiekodering is ’n klas universele ruimte-tyd-frekwensiekodes gebruik. Hierdie kodes gebruik lineêre pre-kodering en ’n laagbenadering gebaseer op Diofantiese syfers om volle diversiteit te bereik en ’n oordragtempo (in simbole per kanaalgebruik per frekwensie) gelyk aan die aantal senderantennes. Die studie van die sisteem oorweeg ’n vergelykende werkverrigtinganalisie van verskillende ruimte-tyd-, ruimte-freksensie- en ruimte-tyd-frekwensiekodes. Die simulasies van die sisteem is gedoen op ’n drievoudig selektiewe blokwegsterwingskanaal. Daar was dus selektiwiteit in die wegsterwing oor tyd, ruimte en frekwensie. Die effek van kwantisering by die ontvanger op die bereikbare diversiteit van lineêr pre-gekodeerde sisteme (soos die ruimte-tyd-frekwensiekodes wat gebruik is) is matematies afgelei en bevestig deur simulasies. ’n Sfeerdekodeerder (SD) is gebruik as ’n MIMO-detektor. Die standaardmetode wat gebuik is om ’n sagte-inset-sagte-uitset (SISO) SD te skep, gebruik ’n harde-na-sagte proses en die maksimum logaritmiese afbeelding-benadering. ’n Nuwe benadering wat ’n Hopfield-netwerk met die SD kombineer, is ontwikkel. Hierdie SD-Hopfield-detektor is verbind met die FFT-BP-algoritme in iteratiewe strukture. Hierdie iteratiewe sisteem was in staat om dieselfde bisfouttempo te bereik as die oorspronklike SISO-SD, met laer kompleksiteit. Die gebruik van die iteratiewe Hopfield-SD en FFT-BP-dekodeerdersisteem maak ook daarvoor voorsiening dat werkverrigting opgeweeg kan word teen kompleksiteit deur die aantal dekodering-iterasies te varieer. Die volledige sisteem maak gebruik van ’n QC-NB-LDPC-kode wat met ’n ruimte-tyd-frekwensiekode by die sender aaneengeskakel is met ’n SISO-SD en FFT-BP-dekodeerder wat in ’n iteratiewe struktuur by die ontvanger gekoppel is. Die sisteem is onder ’n verskeidenheid kanaalkondisies ge-analiseer met inagneming van die effek van korrelasie en kwantisering. Die werkverrigting van verskillende ruimte-frekwensie- en ruimte-tyd-frekwensiekodes is vergelyk en in die sisteem ge-analiseer. ’n Analise om ’n wisselende aantal FFT-BP en buite-iterasies te vergelyk, is ook gedoen. CopyrightDissertation (MEng)--University of Pretoria, 2010.Electrical, Electronic and Computer Engineeringunrestricte
Interleaved frequency Division Multiple Access with Multiple Antennas and Block spreading for Mobile Broadband Communications
Ph.DDOCTOR OF PHILOSOPH
Aeronautical engineering: A continuing bibliography with indexes (supplement 253)
This bibliography lists 637 reports, articles, and other documents introduced into the NASA scientific and technical information system in May, 1990. Subject coverage includes: design, construction and testing of aircraft and aircraft engines; aircraft components, equipment and systems; ground support systems; and theoretical and applied aspects of aerodynamics and general fluid dynamics
Recommended from our members
Computer Modelling of Compact Photonics Devices for Optical Communications
This thesis discusses several important applications of directional coupler-based and multimode interference coupler-based devices. The numerical analysis in this study has been carried out by using the powerful and versatile finite element method (FEM). This method has been proved to be the most accurate numerical methods to date for the analysis of optical waveguides. In this study the vector H-field formulation is used along with the penalty function term to eliminate the spurious solutions.
Using the finite element method the accurate propagation constants o f all the modes and the field profiles can be calculated. However, the finite element method cannot calculate the power transfer efficiency directly, hence the Least Squares Boundary Residual method (LSBR) is used with the FEM for this purpose. The LSBR method is rigorously convergent, satisfying the boundary conditions in the least squares sense over the discontinuity interface. The error minimisation in this approach is global rather than sampled as in the point matching method. Using this method the transmission coefficients of all the modes and the reflection coefficients of the fundamental mode can be determined once the transmission coefficients o f all the modes are calculated, and the power transfer from the input to the coupler section and at the output ports can be evaluated.
In this work, to show the advantages o f the finite element approach an optical polarizer with metal clad directional coupler has been designed and analyzed. The modal loss is also calculated for the TM polarised mode and a Multiple Quantum Well based optical polarizer with two-dimensional confinement is studied. Its equivalent index has been calculated by using the finite element and the results are compared with the analytical results. A large section of this thesis is devoted to the study of multimode interference based devices. An interesting and useful comparison is made on their operating properties such as the crosstalk, device length, polarization dependence and fabrication tolerance of the multimode and the directional coupler-based devices. Finally, the spot size expander approach for improved laser-to-fibre coupling is discussed. In this study initially a taper-based approach is discussed with the simulated values for the coupling loss and reflection coefficients, following which a novel approach using a synchronous directional coupler-based mode expander is studied. Some multiguide directional coupler-based spot size expanders are also discussed and finally a new approach using multimode interference-based compact devices is presented, which is technologically more promising, due to the fascinating properties o f the multimode based devices. This is an interesting exciting area in the field of photonic engineering.
This thesis, starting with a small introductory chapter on optical communication will take the reader in a step-by-step approach to understand the principles and properties of the optical devices that are important for the design of all optical systems. Most of the applications that are presented in this thesis are of great interest to the optical community and I hope the reader will enjoy the contents of this thesis