Deliverable JRA1.1: Evaluation of current network control and management planes for multi-domain network infrastructure

This deliverable includes a compilation and evaluation of available control and management architectures and protocols applicable to a multilayer infrastructure in a multi-domain Virtual Network environment.The scope of this deliverable is mainly focused on the virtualisation of the resources within a network and at processing nodes. The virtualization of the FEDERICA infrastructure allows the provisioning of its available resources to users by means of FEDERICA slices. A slice is seen by the user as a real physical network under his/her domain, however it maps to a logical partition (a virtual instance) of the physical FEDERICA resources. A slice is built to exhibit to the highest degree all the principles applicable to a physical network (isolation, reproducibility, manageability, ...). Currently, there are no standard definitions available for network virtualization or its associated architectures. Therefore, this deliverable proposes the Virtual Network layer architecture and evaluates a set of Management- and Control Planes that can be used for the partitioning and virtualization of the FEDERICA network resources. This evaluation has been performed taking into account an initial set of FEDERICA requirements; a possible extension of the selected tools will be evaluated in future deliverables. The studies described in this deliverable define the virtual architecture of the FEDERICA infrastructure. During this activity, the need has been recognised to establish a new set of basic definitions (taxonomy) for the building blocks that compose the so-called slice, i.e. the virtual network instantiation (which is virtual with regard to the abstracted view made of the building blocks of the FEDERICA infrastructure) and its architectural plane representation. These definitions will be established as a common nomenclature for the FEDERICA project. Other important aspects when defining a new architecture are the user requirements. It is crucial that the resulting architecture fits the demands that users may have. Since this deliverable has been produced at the same time as the contact process with users, made by the project activities related to the Use Case definitions, JRA1 has proposed a set of basic Use Cases to be considered as starting point for its internal studies. When researchers want to experiment with their developments, they need not only network resources on their slices, but also a slice of the processing resources. These processing slice resources are understood as virtual machine instances that users can use to make them behave as software routers or end nodes, on which to download the software protocols or applications they have produced and want to assess in a realistic environment. Hence, this deliverable also studies the APIs of several virtual machine management software products in order to identify which best suits FEDERICA’s needs.Postprint (published version

Energy Saving and Virtualization Technologies in Switching

Switching is the key functionality for many devices like electronic Router and Switch, optical Router, Network on Chips (NoCs) and so on. Basically, switching is responsible for moving data unit from one port/location to another (or multiple) port(s)/location(s). In past years, the high capacity, low delay were the main concerns when designing high-end switching unit. As new demands, requests and technologies emerge, flexibility and low power cost switching design become to weight the same as throughput and delay. On one hand, highly flexible (i.e, programming ability) switching can cope with variable needs stem from new applications (i.e, VoIP) and popular user behavior (i.e, p2p downloading); on the other hand, reduce the energy and power dissipation for switching could not only save bills and build echo system but also expand components life time. Many research efforts have been devoted to increase switching flexibility and reduce its power cost. In this thesis work, we consider to exploit virtualization as the main technique to build flexible software router in the first part, then in the second part we draw our attention on energy saving in NoC (i.e, a switching fabric designed to handle the on chip data transmission) and software router. In the first part of the thesis, we consider the virtualization inside Software Routers (SRs). SR, i.e, routers running in commodity Personal Computers (PCs), become an appealing solution compared to traditional Proprietary Routing Devices (PRD) for various reasons such as cost (the multi-vendor hardware used by SRs can be cheap, while the equipment needed by PRDs is more expensive and their training cost is higher), openness (SRs can make use of a large number of open source networking applications, while PRDs are more closed) and flexibility. The forwarding performance provided by SRs has been an obstacle to their deployment in real networks. For this reason, we proposed to aggregate multiple routing units that form an powerful SR known as the Multistage Software Router (MSR) to overcome the performance limitation for a single SR. Our results show that the throughput can increase almost linearly as the number of the internal routing devices. But some other features related to flexibility (such as power saving, programmability, router migration or easy management) have been investigated less than performance previously. We noticed that virtualization techniques become reality thanks to the quick development of the PC architectures, which are now able to easily support several logical PCs running in parallel on the same hardware. Virtualization could provide many flexible features like hardware and software decoupling, encapsulation of virtual machine state, failure recovery and security, to name a few. Virtualization permits to build multiple SRs inside one physical host and a multistage architecture exploiting only logical devices. By doing so, physical resources can be used in a more efficient way, energy savings features (switching on and off device when needed) can be introduced and logical resources could be rented on-demand instead of being owned. Since virtualization techniques are still difficult to deploy, several challenges need to be faced when trying to integrate them into routers. The main aim of the first part in this thesis is to find out the feasibility of the virtualization approach, to build and test virtualized SR (VSR), to implement the MSR exploiting logical, i.e. virtualized, resources, to analyze virtualized routing performance and to propose improvement techniques to VSR and virtual MSR (VMSR). More specifically, we considered different virtualization solutions like VMware, XEN, KVM to build VSR and VMSR, being VMware a closed source solution but with higher performance and XEN/KVM open source solutions. Firstly we built and tested each single component of our multistage architecture (i.e, back-end router, load balancer )inside the virtual infrastructure, then and we extended the performance experiments with more complex scenarios like multiple Back-end Router (BR) or Load Balancer (LB) which cooperate to route packets. Our results show that virtualization could introduce 40~\% performance penalty compare with the hardware only solution. Keep the performance limitation in mind, we developed the whole VMSR and we obtained low throughput with 64B packet flow as expected. To increase the VMSR throughput, two directions could be considered, the first one is to improve the single component ( i.e, VSR) performance and the other is to work from the topology (i.e, best allocation of the VMs into the hardware ) point of view. For the first method, we considered to tune the VSR inside the KVM and we studied closely such as Linux driver, scheduler, interconnect methodology which could impact the performance significantly with proper configuration; then we proposed two ways for the VMs allocation into physical servers to enhance the VMSR performance. Our results show that with good tuning and allocation of VMs, we could minimize the virtualization penalty and get reasonable throughput for running SRs inside virtual infrastructure and add flexibility functionalities into SRs easily. In the second part of the thesis, we consider the energy efficient switching design problem and we focus on two main architecture, the NoC and MSR. As many research works suggest, the energy cost in the Communication Technologies ( ICT ) is constantly increasing. Among the main ICT sectors, a large portion of the energy consumption is contributed by the telecommunication infrastructure and their devices, i.e, router, switch, cell phone, ip TV settle box, storage home gateway etc. More in detail, the linecards, links, System on Chip (SoC) including the transmitter/receiver on these variate devices are the main power consuming units. We firstly present the work on the power reduction of the data transmission in SoC, which is carried out by the NoC. NoC is an approach to design the communication subsystem between different Processing Units (PEs) in a SoC. PEs could be different elements such as CPU, memory, digital signal/analog signal processor etc. Different PEs performs specific tasks depending on the applications running on the chip. Different tasks need to exchange data information among each other, thus flits ( chopped packet with limited header information ) are generated by PEs. The flits are injected into the NoC by the proper interface and routed until reach the destination PEs. For the whole procedure, the NoC behaves as a packet switch network. Studies show that in general the information processing in the PEs only consume 60~\% energy while the remaining 40~\% are consumed by the NoC. More importantly, as the current network designing principle, the NoC capacity is devised to handle the peak load. This is a clear sign for energy saving when the network load is low. In our work, we considered to exploit Dynamic Voltage and Frequency Scaling (DVFS) technique, which can jointly decrease or increase the system voltage and frequency when necessary, i.e, decrease the voltage and frequency at low load scenario to save energy and reduce power dissipation. More precisely, we studied two different NoC architectures for energy saving, namely single plane chip and multi-plane chip architecture. In both cases we have a very strict constraint to be that all the links and transmitter/receivers on the same plane work at the same frequency/voltage to avoid synchronization problem. This is the main difference with many existing works in the literature which usually assume different links can work at different frequency, that is hard to be implemented in reality. For the single plane NoC, we exploited different routing schemas combined with DVFS to reduce the power for the whole chip. Our results haven been compared with the optimal value obtained by modeling the power saving formally as a quadratic programming problem. Results suggest that just by using simple load balancing routing algorithm, we can save considerable energy for the single chip NoC architecture. Furthermore, we noticed that in the single plane NoC architecture, the bottleneck link could limit the DVFS effectiveness. Then we discovered that multiplane NoC architecture is fairly easy to be implemented and it could help with the energy saving. Thus we focus on the multiplane architecture and we found out that DVFS could be more efficient when we concentrate more traffic into one plane and send the remaining flows to other planes. We compared load concentration and load balancing with different power modeling and all simulation results show that load concentration is better compared with load balancing for multiplan NoC architecture. Finally, we also present one of the the energy efficient MSR design technique, which permits the MSR to follow the day-night traffic pattern more efficiently with our on-line energy saving algorithm

Perfomance Analysis of the Xen Hypervisor For Virtualizing Network Devices

Acknowledging the great potential of virtualization techniques in communication networks, the aim of this project is to understand and analyze the possibilities of virtualization in the network scope. For that reason we set the objectives of the project as follows:• To analyze the different virtualization techniques currently available and to understand their impact in the virtualization process • To identify virtualization tools supporting the above virtualization techniques • To devise a set of scenarios where virtualization can play a role and implement a subset of them for evaluation purposes • To devise a set of performance indexes to evaluate the behaviour of virtual network scenarios. • To select a virtualization tool and run a set of experiments with the virtual network infrastructure • To propose a monitoring mechanism of the usage of resources of each virtual machine • To extrapolate the evaluation results of the proposed tests to more complex scenario

Exploring the Virtual Infrastructures as a Service concept with HIPerNET

With the expansion and convergence of communication and computing, dynamic provisioning of customized networking and processing infrastructures, as well as resource virtualization, are appealing concepts and technologies. Therefore, new models and tools are needed to allow users to create, trust and enjoy such on-demand virtual infrastructures within a wide area context. This research report presents the HIPerNET framework that we are designing and developing for creating, managing and controlling virtual infrastructures in the context of high-speed Internet. The key idea of this proposal is the combination of network- and system-virtualization associated with controlled resource reservation to provide fully isolated environments. HIPerNET's motivations and design principles are presented. We then examine specifically how this framework handles the virtual infrastructures, called Virtual Private eXecution Infrastructures (VPXI). To help specifying customized isolated infrastructures, HIPerNET relies on VXDL, a language for VPXI description and modeling which considers end-host resource as well as the virtual network topology interconnecting them, including virtual routers. We exemplify the VPXI specification, allocation and execution using a real large-scale distributed medical application. Experimental results obtained within the Grid'5000 testbed are presented and analyzed

Virtualizing Network Processors

This paper considers the problem of virtualizing the resources of a network processor (NP) in order to allow multiple third-parties to execute their own virtual router software on a single physical router at the same time. Our broad interest is in designing such a router capable of supporting virtual networking. We discuss the issues and challenges involved in this virtualization, and then describe specific techniques for virtualizing both the control and data-plane processors on NPs. For Intel IXP NPs in particular, we present a dynamic, macro-based technique for virtualization that allows multiple virtual routers to run on multiple data plane processors (or micro-engines) while maintaining memory isolation and enforcing memory bandwidth allocations

In the Direction of Service Guarantees for Virtualized Network Functions

The trend of consolidating network functions from specialized hardware to software running on virtualization servers brings significant advantages for reducing costs and simplifying service deployment. However, virtualization techniques have significant limitations when it comes to networking as there is no support for guaranteeing that network functions meet their service requirements. In this paper, we present a design for providing service guarantees to virtualized network functions based on rate control. The design is a combination of rate regulation through token bucket filters and the regular scheduling mechanisms in operating systems. It has the attractive property that traffic profiles are maintained throughout a series of network functions, which makes it well suited for service function chaining. We discuss implementation alternatives for the design and demonstrate how it can be implemented on two virtualization platforms: LXC containers and the KVM hypervisor. To evaluate the design, we conduct experiments where we measure throughput and latency using IP forwarders (routers) as examples of virtual network functions. Two significant factors for performance are investigated: the design of token buckets and the packet clustering effect that comes from scheduling. Finally, we demonstrate how performance guarantees are achieved for rate-controlled virtual routers under different scenarios.publishedVersio

An open virtual multi-services networking architecture for the future internet

© 2015, El Barachi et al.; licensee Springer. Network virtualization is considered as a promising way to overcome the limitations and fight the gradual ossification of the current Internet infrastructure. The network virtualization concept consists in the dynamic creation of several co-existing logical network instances (or virtual networks) over a shared physical network infrastructure. We have previously proposed a service-oriented hierarchical business model for virtual networking environments. This model promotes the idea of network as a service, by considering the functionalities offered by different types of network resources as services of different levels – services that can be dynamically discovered, used, and composed. In this paper, we propose an open, virtual, multi-services networking architecture enabling the realization of our business model. We also demonstrate the operation of our architecture using a virtualized QoS-enabled VoIP scenario. Moreover, virtual routing and control level performance was evaluated using proof-of-concept prototyping. Several important findings were made in the course of this work; one is that service-oriented concepts can be used to build open, flexible, and collaborative virtual networking environments. Another finding is that some of the existing open source virtual routing solutions such as Vyatta are only suitable for building small to medium size virtual networking infrastructures

An open virtual multi-services networking architecture for the future internet

© 2015, El Barachi et al.; licensee Springer. Network virtualization is considered as a promising way to overcome the limitations and fight the gradual ossification of the current Internet infrastructure. The network virtualization concept consists in the dynamic creation of several co-existing logical network instances (or virtual networks) over a shared physical network infrastructure. We have previously proposed a service-oriented hierarchical business model for virtual networking environments. This model promotes the idea of network as a service, by considering the functionalities offered by different types of network resources as services of different levels – services that can be dynamically discovered, used, and composed. In this paper, we propose an open, virtual, multi-services networking architecture enabling the realization of our business model. We also demonstrate the operation of our architecture using a virtualized QoS-enabled VoIP scenario. Moreover, virtual routing and control level performance was evaluated using proof-of-concept prototyping. Several important findings were made in the course of this work; one is that service-oriented concepts can be used to build open, flexible, and collaborative virtual networking environments. Another finding is that some of the existing open source virtual routing solutions such as Vyatta are only suitable for building small to medium size virtual networking infrastructures

Container network functions: bringing NFV to the network edge

In order to cope with the increasing network utilization driven by new mobile clients, and to satisfy demand for new network services and performance guarantees, telecommunication service providers are exploiting virtualization over their network by implementing network services in virtual machines, decoupled from legacy hardware accelerated appliances. This effort, known as NFV, reduces OPEX and provides new business opportunities. At the same time, next generation mobile, enterprise, and IoT networks are introducing the concept of computing capabilities being pushed at the network edge, in close proximity of the users. However, the heavy footprint of today's NFV platforms prevents them from operating at the network edge. In this article, we identify the opportunities of virtualization at the network edge and present Glasgow Network Functions (GNF), a container-based NFV platform that runs and orchestrates lightweight container VNFs, saving core network utilization and providing lower latency. Finally, we demonstrate three useful examples of the platform: IoT DDoS remediation, on-demand troubleshooting for telco networks, and supporting roaming of network functions

Virtualization to build large scale networks

Abstract. There is not much research concerning network virtualization, even though virtualization has been a hot topic for some time and networks keep growing. Physical routers can be expensive and laborious to setup and manage, not to mention immobile. Network virtualization can be utilized in many ways, such as reducing costs, increasing agility and increasing deployment speed. Virtual routers are easy to create, copy and move. This study will research into the subjects of networks, virtualization solutions and network virtualization. Furthermore, it will show how to build a virtual network consisting of hundreds of nodes, all performing network routing. In addition, the virtual network can be connected to physical routers in the real world to provide benefits, such as performance testing or large-scale deployment. All this will be achieved using only commodity hardware