A cost-effective clustered architecture

In current superscalar processors, all floating-point resources are idle during the execution of integer programs. As previous works show, this problem can be alleviated if the floating-point cluster is extended to execute simple integer instructions. With minor hardware modifications to a conventional superscalar processor, the issue width can potentially be doubled without increasing the hardware complexity. In fact, the result is a clustered architecture with two heterogeneous clusters. We propose to extend this architecture with a dynamic steering logic that sends the instructions to either cluster. The performance of clustered architectures depends on the inter-cluster communication overhead and the workload balance. We present a scheme that uses run-time information to optimise the trade-off between these figures. The evaluation shows that this scheme can achieve an average speed-up of 35% over a conventional 8-way issue (4 int+4 fp) machine and that it outperforms the previously proposed one.Peer ReviewedPostprint (published version

Improving multithreading performance for clustered VLIW architectures.

Very Long Instruction Word (VLIW) processors are very popular in embedded and mobile computing domain. Use of VLIW processors range from Digital Signal Processors (DSPs) found in a plethora of communication and multimedia devices to Graphics Processing Units (GPUs) used in gaming and high performance computing devices. The advantage of VLIWs is their low complexity and low power design which enable high performance at a low cost. Scalability of VLIWs is limited by the scalability of register file ports. It is not viable to have a VLIW processor with a single large register file because of area and power consumption implications of the register file. Clustered VLIW solve the register file scalability issue by partitioning the register file into multiple clusters and a set of functional units that are attached to register file of that cluster. Using a clustered approach, higher issue width can be achieved while keeping the cost of register file within reasonable limits. Several commercial VLIW processors have been designed using the clustered VLIW model. VLIW processors can be used to run a larger set of applications. Many of these applications have a good Lnstruction Level Parallelism (ILP) which can be efficiently utilized. However, several applications, specially the ones that are control code dominated do not exibit good ILP and the processor is underutilized. Cache misses is another major source of resource underutiliztion. Multithreading is a popular technique to improve processor utilization. Interleaved MultiThreading (IMT) hides cache miss latencies by scheduling a different thread each cycle but cannot hide unused instructions slots. Simultaneous MultiThread (SMT) can also remove ILP under-utilization by issuing multiple threads to fill the empty instruction slots. However, SMT has a higher implementation cost than IMT. The thesis presents Cluster-level Simultaneous MultiThreading (CSMT) that supports a limited form of SMT where VLIW instructions from different threads are merged at a cluster-level granularity. This lowers the hardware implementation cost to a level comparable to the cheap IMT technique. The more complex SMT combines VLIW instructions at the individual operation-level granularity which is quite expensive especially in for a mobile solution. We refer to SMT at operation-level as OpSMT to reduce ambiguity. While previous studies restricted OpSMT on a VLIW to 2 threads, CSMT has a better scalability and upto 8 threads can be supported at a reasonable cost. The thesis proposes several other techniques to further improve CSMT performance. In particular, Cluster renaming remaps the clusters used by instructions of different threads to reduce resource conflicts. Cluster renaming is quite effective in reducing the issue-slots under-utilization and significantly improves CSMT performance.The thesis also proposes: a hybrid between IMT and CSMT which increases the number of supported threads, heterogeneous instruction merging where some instructions are combined using SMT and CSMT rest, and finally, split-issue, a technique that allows to launch partially an instruction making it easier to be combined with others

Hybrid multithreading for VLIW processors

© ACM, 2009. This is the author's version of the work: http://doi.acm.org/10.1145/1629395.1629403Several multithreading techniques have been proposed to reduce resource underutilization in Very Long Instruction Word (VLIW) processors. Simultaneous MultiThreading (SMT) is a popular technique that improves processor performance by issuing multiple instructions from di erent threads. In VLIW processors, SMT requires extra hardware to merge instructions from di erent threads. The complexity of this hardware increases substantially with the number of threads. On the other hand, techniques like Interleaved MultiThreading (IMT) do not need any merging hardware, and support a larger number of threads at reasonable cost. In this paper, we propose Hybrid MultiThreading (HMT), a technique that at each cycle merges instructions from only a subset of threads. HMT supports a reasonable number of threads with a low merging hardware cost. For instance, it is possible to support 8 hardware threads with a merging hardware for only 2 threads. The experimental results show that using HMT improves the multithreading performance significantly. Further, supporting 8 hardware threads with HMT but using a 4-thread merging hardware achieves a performance similar to merging 8 threads simultaneously with a significantly lower merging hardware cost.Peer ReviewedPostprint (author’s final draft

Late allocation and early release of physical registers

The register file is one of the critical components of current processors in terms of access time and power consumption. Among other things, the potential to exploit instruction-level parallelism is closely related to the size and number of ports of the register file. In conventional register renaming schemes, both register allocation and releasing are conservatively done, the former at the rename stage, before registers are loaded with values, and the latter at the commit stage of the instruction redefining the same register, once registers are not used any more. We introduce VP-LAER, a renaming scheme that allocates registers later and releases them earlier than conventional schemes. Specifically, physical registers are allocated at the end of the execution stage and released as soon as the processor realizes that there will be no further use of them. VP-LAER enhances register utilization, that is, the fraction of allocated registers having a value to be read in the future. Detailed cycle-level simulations show either a significant speedup for a given register file size or a reduction in the register file size for a given performance level, especially for floating-point codes, where the register file pressure is usually high.Peer ReviewedPostprint (published version

Reducing exception management overhead with software restart markers

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2008.Includes bibliographical references (p. 181-196).Modern processors rely on exception handling mechanisms to detect errors and to implement various features such as virtual memory. However, these mechanisms are typically hardware-intensive because of the need to buffer partially-completed instructions to implement precise exceptions and enforce in-order instruction commit, often leading to issues with performance and energy efficiency. The situation is exacerbated in highly parallel machines with large quantities of programmer-visible state, such as VLIW or vector processors. As architects increasingly rely on parallel architectures to achieve higher performance, the problem of exception handling is becoming critical. In this thesis, I present software restart markers as the foundation of an exception handling mechanism for explicitly parallel architectures. With this model, the compiler is responsible for delimiting regions of idempotent code. If an exception occurs, the operating system will resume execution from the beginning of the region. One advantage of this approach is that instruction results can be committed to architectural state in any order within a region, eliminating the need to buffer those values. Enabling out-of-order commit can substantially reduce the exception management overhead found in precise exception implementations, and enable the use of new architectural features that might be prohibitively costly with conventional precise exception implementations. Additionally, software restart markers can be used to reduce context switch overhead in a multiprogrammed environment. This thesis demonstrates the applicability of software restart markers to vector, VLIW, and multithreaded architectures. It also contains an implementation of this exception handling approach that uses the Trimaran compiler infrastructure to target the Scale vectorthread architecture. I show that using software restart markers incurs very little performance overhead for vector-style execution on Scale.(cont.) Finally, I describe the Scale compiler flow developed as part of this work and discuss how it targets certain features facilitated by the use of software restart markersby Mark Jerome Hampton.Ph.D

Smart memory management through locality analysis

Las memorias caché fueron incorporadas en los microprocesadores ya desde los primeros tiempos, y representan la solución más común para tratar la diferencia de velocidad entre el procesador y la memoria. Sin embargo, muchos estudios señalan que la capacidad de almacenamiento de la caché es malgastada muchas veces, lo cual tiene un impacto directo en el rendimiento del procesador. Aunque una caché está diseñada para explotar diferentes tipos de localidad, todas la referencias a memoria son tratadas de la misma forma, ignorando comportamientos particulares de localidad. El uso restringido de la información de localidad para cada acceso a memoria puede limitar la eficiencia de la cache. En esta tesis se demuestra como un análisis de localidad de datos puede ayudar al investigador a entender dónde y porqué ocurren los fallos de caché, y proponer entonces diferentes técnicas que hacen uso de esta información con el objetivo de mejorar el rendimiento de la memoria caché. Proponemos técnicas en las cuales la información de localidad obtenida por el analizador de localidad es pasada desde el compilador al hardware a través del ISA para guiar el manejo de los accesos a memoria.Hemos desarrollado un análisis estático de localidad de datos. Este análisis está basado en los vectores de reuso y contiene los tres típicos pasos: reuso, volumen y análisis de interferencias. Comparado con trabajos previos, tanto el análisis de volúmenes como el de interferencias ha sido mejorado utilizando información de profiling así como un análisis de interferencias más preciso. El analizador de localidad de datos propuesto ha sido incluido como un paso más en un compilador de investigación. Los resultados demuestran que, para aplicaciones numéricas, el análisis es muy preciso y el overhead de cálculo es bajo. Este análisis es la base para todas las otras partes de la tesis. Además, para algunas propuestas en la última parte de la tesis, hemos usado un análisis de localidad de datos basado en las ecuaciones de fallos de cache. Este análisis, aunque requiere más tiempo de cálculo, es más preciso y más apropiado para cachés asociativas por conjuntos. El uso de dos análisis de localidad diferentes también demuestra que las propuestas arquitectónicas de esta tesis son independientes del análisis de localidad particular utilizado.Después de mostrar la precisión del análisis, lo hemos utilizado para estudiar el comportamiento de localidad exhibido por los programas SPECfp95. Este tipo de análisis es necesario antes de proponer alguna nueva técnica ya que ayuda al investigador a entender porqué ocurren los fallos de caché. Se muestra que con el análisis propuesto se puede estudiar de forma muy precisa la localidad de un programa y detectar donde estan los "puntos negros" así como la razón de estos fallos en cache. Este estudio del comportamiento de localidad de diferentes programas es la base y motivación para las diferentes técnicas propuestas en esta tesis para mejorar el rendimiento de la memoria.Así, usando el análisis de localidad de datos y basándonos en los resultados obtenidos después de analizar el comportamiento de localidad de un conjunto de programas, proponemos utilizar este análisis con el objetivo de guiar tres técnicas diferentes: (i) manejo de caches multimódulo, (ii) prebúsqueda software para bucles con planificación módulo, y (iii) planificación de instrucciones de arquitecturas VLIW clusterizadas.El primer uso del análisis de localidad propuesto es el manejo de una novedosa organización de caché. Esta caché soporta bypass y/o está compuesta por diferentes módulos, cada uno orientado a explotar un tipo particular de localidad. La mayor diferencia de esta caché con respecto propuestas previas es que la decisión de "cachear" o no, o en qué módulo un nuevo bloque es almacenado, está controlado por algunos bits en las instrucciones de memoria ("pistas" de localidad). Estas "pistas" (hints) son fijadas en tiempo de compilación utilizando el análisis de localidad propuesto. Así, la complejidad del manejo de esta caché se mantiene bajo ya que no requiere ningún hardware adicional. Los resultados demuestran que cachés más pequeñas con un manejo más inteligente pueden funcionar tan bien (o mejor) que cachés convencionales más grandes.Hemos utilizado también el análisis de localidad para estudiar la interacción entre la segmentación software y la prebúsqueda software. La segmentación software es una técnica muy efectiva para la planificación de código en bucles (principalmente en aplicaciones numéricas en procesadores VLIW). El esquema más popular de prebúsqueda software se llama planificación módulo. Muchos trabajos sobre planificación módulo se pueden encontrar en la literatura, pero casi todos ellos consideran una suposición crítica: consideran un comportamiento optimista de la cache (en otras palabras, usan siempre la latencia de acierto cuando planifican instrucciones de memoria). Así, los resultados que presentan ignoran los efectos del bloqueo debido a dependencias con instrucciones de memoria. En esta parte de la tesis mostramos que esta suposición puede llevar a planificaciones cuyo rendimiento es bastante más bajo cuando se considera una memoria real. Nosotros proponemos un algoritmo para planificar instrucciones de memoria en bucles con planificación módulo. Hemos estudiado diferentes estrategias de prebúsqueda software y finalmente hemos propuesto un algoritmo que realiza prebúsqueda basándose en el análisis de localidad y en la forma del grafo de dependencias del bucle. Los resultados obtenidos demuestran que el esquema propuesto mejora el rendimiento de las otras heurísticas ya que obtiene un mejor compromiso entre tiempo de cálculo y de bloqueo.Finalmente, el último uso del análisis de localidad estudiado en esta tesis es para guiar un planificador de instrucciones para arquitecturas VLIW clusterizadas. Las arquitecturas clusterizadas están siendo una tendencia común en el diseño de procesadores empotrados/DSP. Típicamente, el núcleo de estos procesadores está basado en un diseño VLIW el cual particiona tanto el banco de registros como las unidades funcionales. En este trabajo vamos un paso más allá y también hacemos la partición de la memoria caché. En este caso, tanto las comunicaciones entre registros como entre memorias han de ser consideradas. Nosotros proponemos un algoritmo que realiza la partición del grafo así como la planificación de instrucciones en un único paso en lugar de hacerlo secuencialmente, lo cual se demuestra que es más efectivo. Este algoritmo es mejorado añadiendo una análisis basado en las ecuaciones de fallos de cache con el objetivo de guiar en la planificación de las instrucciones de memoria para reducir no solo comunicaciones entre registros, sino también fallos de cache.Cache memories were incorporated in microprocessors in the early times and represent the most common solution to deal with the gap between processor and memory speeds. However, many studies point out that the cache storage capacity is wasted many times, which means a direct impact in processor performance. Although a cache is designed to exploit different types of locality, all memory references are handled in the same way, ignoring particular locality behaviors. The restricted use of the locality information for each memory access can limit the effectivity of the cache. In this thesis we show how a data locality analysis can help the researcher to understand where and why cache misses occur, and then to propose different techniques that make use of this information in order to improve the performance of cache memory. We propose techniques in which locality information obtained by the locality analyzer is passed from the compiler to the hardware through the ISA to guide the management of memory accesses.We have developed a static data locality analysis. This analysis is based on reuse vectors and performs the three typical steps: reuse, volume and interfere analysis. Compared with previous works, both volume and interference analysis have been improved by using profile information as well as a more precise inter-ference analysis. The proposed data locality analyzer has been inserted as another pass in a research compiler. Results show that for numerical applications the analysis is very accurate and the computing overhead is low. This analysis is the base for all other parts of the thesis. In addition, for some proposals in the last part of the thesis we have used a data locality analysis based on cache miss equations. This analysis, although more time consuming, is more accurate and more appropriate for set-associative caches. The usage of two different locality analyzers also shows that the architectural proposals of this thesis are independent from the particular locality analysis.After showing the accuracy of the analysis, we have used it to study the locality behavior exhibited by the SPECfp95 programs. This kind of analysis is necessary before proposing any new technique since can help the researcher to understand why cache misses occur. We show that with the proposed analysis we can study very accurately the locality of a program and detect where the hot spots are as well as the reason for these misses. This study of the locality behavior of different programs is the base and motivation for the different techniques proposed in this thesis to improve the memory performance.Thus, using the data locality analysis and based on the results obtained after analyzing the locality behavior of a set of programs, we propose to use this analysis in order to guide three different techniques: (i) management of multi-module caches, (ii) software prefetching for modulo scheduled loops, and (iii) instruction scheduling for clustered VLIW architectures.The first use of the proposed data locality analysis is to manage a novel cache organization. This cache supports bypassing and/or is composed of different modules, each one oriented to exploit a particular type of locality. The main difference of this cache with respect to previous proposals is that the decision of caching or not, or in which module a new fetched block is allocated is managed by some bits in memory instructions (locality hints). These hints are set at compile time using the proposed locality analysis. Thus, the management complexity of this cache is kept low since no additional hardware is required. Results show that smaller caches with a smart management can perform as well as (or better than) bigger conventional caches.We have also used the locality analysis to study the interaction between software pipelining and software prefetching. Software pipelining has been shown to be a very effective scheduling technique for loops (mainly in numerical applications for VLIW processors). The most popular scheme for software pipelining is called modulo scheduling. Many works on modulo scheduling can be found in the literature, but almost all of them make a critical assumption: they consider an optimistic behavior of the cache (in other words, they use the hit latency when a memory instruction is scheduled). Thus, the results they present ignore the effect of stalls due to dependences with memory instructions. In this part of the thesis we show that this assumption can lead to schedules whose performance is rather low when a real memory is considered. Thus, we propose an algorithm to schedule memory instructions in modulo scheduled loops. We have studied different software prefetching strategies and finally proposed an algorithm that performs prefetching based on the locality analysis and the shape of the loop dependence graph. Results obtained shows that the proposed scheme outperforms other heuristic approaches since it achieves a better trade-off between compute and stall time than the others. Finally, the last use of the locality analysis studied in this thesis is to guide an instruction scheduler for a clustered VLIW architecture. Clustered architectures are becoming a common trend in the design of embedded/DSP processors. Typically, the core of these processors is based on a VLIW design which partitionates both register file and functional units. In this work we go a step beyond and also make a partition of the cache memory. Then, both inter-register and inter-memory communications have to be taken into account. We propose an algorithm that performs both graph partition and instruction scheduling in a single step instead of doing it sequentially, which is shown to be more effective. This algorithm is improved by adding an analysis based on the cache miss equations in order to guide the scheduling of memory instructions in clusters with the aim of reducing not only inter-register communications, but also cache misses

Register Multimapping: Reducing Register Bank Conflicts Through One-to-Many Logical-to-Physical Register Mapping

Coordinated Science Laboratory was formerly known as Control Systems Laborator

Multithreaded Extension to Multicluster VLIW Processors for Embedded Applications

Instruction Level Parallelism (ILP) extraction for multi-cluster VLIW processors is a very hard task. In this paper, we propose a retargetable architecture that can exploit ILP and thread level parallelism jointly, thus allowing an eas-ier parallelism extraction and improving the performance with respect to traditional multicluster VLIW processors. 1