Transmission transformer tap changer optimisation while minimising system losses using security unconstrained Optimal Power Flow (OPF) techniques

This dissertation investigates the feasibility of fixed tap or reduced tap transformers on the Eskom Transmission system, thereby reducing transformer failures and reducing the cost of new or replacement transformers. The main analysis uses Optimal Power Flow (OPF) techniques based on a Siemens PSS/E software platform and a minimum system loss operating point or objective function while reducing tap movements and maintaining prudent system limits but allowing shunt VAr devices to freely compensate for the reduced tapping. Various years and system conditions are analysed.Finally it is shown that replacing some Transmission transformers with fixed-tap transformers is a more cost effective solution. The contribution of this research is two-fold: 1. to show that there is scope for Eskom System Operations to operate its system more efficiently in terms of system losses 2. to show that an OPF methodology is a practical technique to limit transformer tap movements and allow optimal VAr placement while minimising system losse

Aspects industriels de la gestion de tension et la capacité d'accueil de la génération photovoltaïque dans les réseaux basse tension

In this thesis, voltage measurements provided by the advanced metering infrastructure (AMI) are used to control an on-load tap changer located at the secondary substation. The thesis presents a practical and a straightforward method of selecting the low voltage customers whose voltage measurements are used as an input to the controller of the on-load tap changer. The developed method takes into account the load and the topology of the network. Furthermore, a simple method of creating synthetic and statistically correct load curves for networks studies is presented. The created methods have been tested by using real data of low voltage networks on a common platform in the power distribution industry leading to encouraging results; a few customers per low voltage network should be monitored in order to achieve accurate voltage measurements.This methodology is further applied to estimate the hosting capacity of photovoltaic power generation in a given low voltage network.In the first part, the evolution of the hosting capacity by using three different types of voltage control; an on-load tap changer of five and nine tap positions and voltage control through photovoltaic power generators, is studied. The study considers two different cases for placing and sizing the photovoltaic generators in a low voltage network. The results of 38 low voltage networks are provided.In the second part, the hosting capacities of 631 low voltage networks, located in a French metropolitan area, are analysed by using an on-load tap changer of five and an on-load tap changer of nine tap positions.The work has been together with Électricité Réseau Distribution France (ERDF), the major French distribution system operator. All studies presented in the thesis are based on the real operational data of the company. Moreover, all studies are implemented on a platform that is widely used in the power distribution industry.As an introductory part to low voltage networks, the thesis provides a general view about the French power system. In addition, the thesis presents a number of selected technologies considering low voltage networks that seem promising in the future.Dans cette thèse, les mesures de tension fournies par l'infrastructure de comptage avancé (Advanced Metering Infrastructure, AMI) sont utilisées pour contrôler un régleur en charge situé à la sous station HTA/BT. La thèse présente une méthode simple permettant de sélectionner les clients basse tension pour lesquels les mesures de tension sont utilisées comme une entrée au contrôleur du régleur en charge. Le procédé mis au point tient compte de la charge et de la topologie du réseau. En outre, une méthode simple pour créer des courbes réalistes et statistiquement correctes pour les études de réseaux est présenté. Les méthodes créées ont été testées en utilisant des données réelles de réseaux basse tension sur un logiciel très utilisé dans le secteur de la distribution d'électricité ont conduit à des résultats encourageants; quelques clients par réseau basse tension doivent être surveillés afin d’estimer avec une grande précision où se situe les extremums de tension sur le réseau.Cette méthodologie est également utilisée pour estimer la capacité d'accueil de génération d'énergie photovoltaïque dans un réseau à basse tension donné.Dans la première partie, l'évolution de la capacité d'accueil en utilisant trois types de contrôle de tension différents; un régleur en charge de cinq et neuf positions et le contrôle de la tension à travers les générateurs photovoltaïques, sont étudiés. L'étude considère deux cas différents pour le placement et le dimensionnement des générateurs photovoltaïques dans un réseau basse tension. Les résultats sur 38 réseaux basse tension sont fournis.Dans la deuxième partie, les capacités d'accueil de 631 réseaux basse tension, situés dans une région métropolitaine française, sont analysés en utilisant un régleur en charge de cinq et neuf positions.Le travail a été réalisé en collaboration avec Électricité Réseau Distribution France (ERDF), le principal opérateur du réseau de distribution français. Toutes les études présentées dans la thèse reposent sur les données réelles de fonctionnement normal. En outre, toutes les études sont mises en œuvre sur un logiciel largement utilisé dans l'industrie de la distribution d'énergie.Comme une partie introductive aux réseaux basse tension, la thèse fournit une vue générale sur le système électrique français. De plus, la thèse présente un certain nombre de technologies sélectionnés en tenant compte des réseaux basse-tension qui semblent prometteurs pour le futur

Aspects industriels de la gestion de tension et la capacité d'accueil de la génération photovoltaïque dans les réseaux basse tension

In this thesis, voltage measurements provided by the advanced metering infrastructure (AMI) are used to control an on-load tap changer located at the secondary substation. The thesis presents a practical and a straightforward method of selecting the low voltage customers whose voltage measurements are used as an input to the controller of the on-load tap changer. The developed method takes into account the load and the topology of the network. Furthermore, a simple method of creating synthetic and statistically correct load curves for networks studies is presented. The created methods have been tested by using real data of low voltage networks on a common platform in the power distribution industry leading to encouraging results; a few customers per low voltage network should be monitored in order to achieve accurate voltage measurements.This methodology is further applied to estimate the hosting capacity of photovoltaic power generation in a given low voltage network.In the first part, the evolution of the hosting capacity by using three different types of voltage control; an on-load tap changer of five and nine tap positions and voltage control through photovoltaic power generators, is studied. The study considers two different cases for placing and sizing the photovoltaic generators in a low voltage network. The results of 38 low voltage networks are provided.In the second part, the hosting capacities of 631 low voltage networks, located in a French metropolitan area, are analysed by using an on-load tap changer of five and an on-load tap changer of nine tap positions.The work has been together with Électricité Réseau Distribution France (ERDF), the major French distribution system operator. All studies presented in the thesis are based on the real operational data of the company. Moreover, all studies are implemented on a platform that is widely used in the power distribution industry.As an introductory part to low voltage networks, the thesis provides a general view about the French power system. In addition, the thesis presents a number of selected technologies considering low voltage networks that seem promising in the future.Dans cette thèse, les mesures de tension fournies par l'infrastructure de comptage avancé (Advanced Metering Infrastructure, AMI) sont utilisées pour contrôler un régleur en charge situé à la sous station HTA/BT. La thèse présente une méthode simple permettant de sélectionner les clients basse tension pour lesquels les mesures de tension sont utilisées comme une entrée au contrôleur du régleur en charge. Le procédé mis au point tient compte de la charge et de la topologie du réseau. En outre, une méthode simple pour créer des courbes réalistes et statistiquement correctes pour les études de réseaux est présenté. Les méthodes créées ont été testées en utilisant des données réelles de réseaux basse tension sur un logiciel très utilisé dans le secteur de la distribution d'électricité ont conduit à des résultats encourageants; quelques clients par réseau basse tension doivent être surveillés afin d’estimer avec une grande précision où se situe les extremums de tension sur le réseau.Cette méthodologie est également utilisée pour estimer la capacité d'accueil de génération d'énergie photovoltaïque dans un réseau à basse tension donné.Dans la première partie, l'évolution de la capacité d'accueil en utilisant trois types de contrôle de tension différents; un régleur en charge de cinq et neuf positions et le contrôle de la tension à travers les générateurs photovoltaïques, sont étudiés. L'étude considère deux cas différents pour le placement et le dimensionnement des générateurs photovoltaïques dans un réseau basse tension. Les résultats sur 38 réseaux basse tension sont fournis.Dans la deuxième partie, les capacités d'accueil de 631 réseaux basse tension, situés dans une région métropolitaine française, sont analysés en utilisant un régleur en charge de cinq et neuf positions.Le travail a été réalisé en collaboration avec Électricité Réseau Distribution France (ERDF), le principal opérateur du réseau de distribution français. Toutes les études présentées dans la thèse reposent sur les données réelles de fonctionnement normal. En outre, toutes les études sont mises en œuvre sur un logiciel largement utilisé dans l'industrie de la distribution d'énergie.Comme une partie introductive aux réseaux basse tension, la thèse fournit une vue générale sur le système électrique français. De plus, la thèse présente un certain nombre de technologies sélectionnés en tenant compte des réseaux basse-tension qui semblent prometteurs pour le futur

Discrete Event Simulations

Considered by many authors as a technique for modelling stochastic, dynamic and discretely evolving systems, this technique has gained widespread acceptance among the practitioners who want to represent and improve complex systems. Since DES is a technique applied in incredibly different areas, this book reflects many different points of view about DES, thus, all authors describe how it is understood and applied within their context of work, providing an extensive understanding of what DES is. It can be said that the name of the book itself reflects the plurality that these points of view represent. The book embraces a number of topics covering theory, methods and applications to a wide range of sectors and problem areas that have been categorised into five groups. As well as the previously explained variety of points of view concerning DES, there is one additional thing to remark about this book: its richness when talking about actual data or actual data based analysis. When most academic areas are lacking application cases, roughly the half part of the chapters included in this book deal with actual problems or at least are based on actual data. Thus, the editor firmly believes that this book will be interesting for both beginners and practitioners in the area of DES

Improvement of voltage and power flow control in the GCC power grid by using coordinated FACTS devices

This work presents HVDC/FACTS control device implementation framework in the Gulf cooperative council’s countries. It comprises of five layers of FACTS control devices (STATCOM, SSSC, UPFC, HVDC and centralized/De-centralized Control). This five-layer architecture is designed in order to configure and produce the desired results; based on these outcomes, GCC power system network control and operational problems can be identified and addressed within the control architecture on the GCC power grid. In the context of power FACTS-FRAME, this work is to identify and determine a number of power systems operational and control problems which are persistent on the GCC power grid e.g. poor voltage quality (SAG-Swell), poor load flow control, and limited power transfer capacity issues. The FACTS-FRAME is configured and synthesized by integrating multiple FACTS control devices (STATCOM, SSSC, UPFC) in parallel at different locations on the GCC power grid in order to meet stringent power system control and operational requirements with improved power transfer capacity, controllability and reliability. The mathematical models are derived to indentify and determine operational constraints on the GCC power grid by incorporating real-time and estimated data and the acquired desired results. Herein, FACTS-FRAME is designed to handle distributed computation for intensive power system calculation by integrating multiple FACTS devices on multiple networks within the GCC power network. Distributed power flow algorithms are also derived in order to understand and implement centralized and decentralized control topologies as appropriate. The simulation results indicate the feasibility of FACTS devices implementation and their potential benefits under current operating conditions on the GCC power grid.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

City-Friendly Smart Network Technologies and Infrastructures: The Spanish Experience

Efficient, resilient, and sustainable electricity delivery is a key cornerstone in increasingly large and complex urban environments, where citizens expect to keep or rise their living standards. In this context, cost-effective and ubiquitous digital technologies are driving the transformation of existing electrical infrastructures into truly smart systems capable of better providing the services a low-carbon society is demanding. The goal of this paper is twofold: 1) to review the dramatically evolving landscape of power systems, from the old framework based on centralized generation and control, aimed at serving inelastic customers through alternating current (ac) transmission networks and one-way distribution feeders, to a new paradigm centered mainly around two main axes: renewable generation, both centralized and distributed, and active customers (prosumers), interacting with each other through hybrid ac/dc smart grids; 2) to illustrate, through featured success stories, how several smart grid concepts and technologies have been put into practice in Spain over the last few years to optimize the performance of urban electrical assets

Increasing the capacity of the Low Voltage Distribution Networks using All-SiC AC-AC Converters

Towards 2020, future energy scenarios predict an excessive penetration of distributed generation (DG) in low voltage (LV) networks as well as a significant uptake of electric vehicles (EVs) and electro-heating. The Distribution Network Operators (DNOs) in UK will face significant challenges towards this de-carbonised electricity generation and consumption shift. The deployment of these so-called low carbon technologies (LCTs) will impact the performance of the distribution network in such way where solutions will be needed to maintain capacity, reliability and the availability of the electricity supply to customers. The practise to put more copper on the ground – reinforcement - in order to facilitate these changes is found to be expensive and disruptive to the public and business. An innovative solution proposed in this thesis is to increase the voltage along the distribution feeders and step it back down at a customer’s premises. Results show that a significant increase at the hosting capacity of the existing network can be achieved and power quality problems such as overvoltage caused by DG can be avoided. The voltage step-down device, which is termed a voltage control unit (VCU), is to be located in the meter-box of each house. This location raises challenges round the temperature rise in the box caused by VCU losses, and the subsequent effect on the electricity meter and cut-out fuse. It also imposes constraints on the size and weight of the VCU so that a very high efficiency design is required, with high power density and small mass. The optimum VCU design was found to be a power electronic AC Chopper using new Silicon Carbide (SiC) MOSFETs and diodes. The technology was demonstrated by designing, constructing and testing two interleaved, parallel operation, 1 kW AC Chopper modules. Results from the prototype were compared against Spice simulation results and theory and confirmed that the target efficiency of 99% was achieved

Enhancing the performance of flexible AC transmission systems (FACTS) by computational intelligence

The thesis studies and analyzes UPFC technology concerns the management of active and reactive power in the power networks to improve the performance aiming to reach the best operation criteria. The contributions of the thesis start with formatting, deriving, coding and programming the network equations required to link UPFC steady-state and dynamic models to the power systems. The thesis derives GA applications on UPFC to achieve real criteria on a real world sub-transmission network. An enhanced GA technique is proposed by enhancing and updating the working phases of the GA including the objective function formulation and computing the fitness using the diversity in the population and selection probability. The simulations and results show the advantages of using the proposed technique. Integrating the results by linking the case studies of the steady-state and the dynamic analysis is achieved. In the dynamic analysis section, a new idea for integrating the GA with ANFIS to be applied on the control action procedure is presented. The main subject of the thesis deals with enhancing the steady-state and dynamics performance of the power grids by Flexible AC Transmission System (FACTS) based on computational intelligence. Control of the electric power system can be achieved by designing the FACTS controller, where the new trends as Artificial Intelligence can be applied to this subject to enhance the characteristics of controller performance. The proposed technique will be applied to solve real problems in a Finnish power grid. The thesis seeks to deal, solve, and enhance performances until the year 2020, where the data used is until the conditions of year 2020. The FACTS device, which will be used in the thesis, is the most promising one, which known as the Unified Power Flow Controller (UPFC). The thesis achieves the optimization of the type, the location and the size of the power and control elements for UPFC to optimize the system performance. The thesis derives the criteria to install the UPFC in an optimal location with optimal parameters and then designs an AI based damping controller for enhancing power system dynamic performance. In this thesis, for every operating point GA is used to search for controllers' parameters, parameters found at certain operating point are different from those found at others. ANFISs are required in this case to recognize the appropriate parameters for each operating point