The Hierarchic treatment of marine ecological information from spatial networks of benthic platforms

Measuring biodiversity simultaneously in different locations, at different temporal scales, and over wide spatial scales is of strategic importance for the improvement of our understanding of the functioning of marine ecosystems and for the conservation of their biodiversity. Monitoring networks of cabled observatories, along with other docked autonomous systems (e.g., Remotely Operated Vehicles [ROVs], Autonomous Underwater Vehicles [AUVs], and crawlers), are being conceived and established at a spatial scale capable of tracking energy fluxes across benthic and pelagic compartments, as well as across geographic ecotones. At the same time, optoacoustic imaging is sustaining an unprecedented expansion in marine ecological monitoring, enabling the acquisition of new biological and environmental data at an appropriate spatiotemporal scale. At this stage, one of the main problems for an effective application of these technologies is the processing, storage, and treatment of the acquired complex ecological information. Here, we provide a conceptual overview on the technological developments in the multiparametric generation, storage, and automated hierarchic treatment of biological and environmental information required to capture the spatiotemporal complexity of a marine ecosystem. In doing so, we present a pipeline of ecological data acquisition and processing in different steps and prone to automation. We also give an example of population biomass, community richness and biodiversity data computation (as indicators for ecosystem functionality) with an Internet Operated Vehicle (a mobile crawler). Finally, we discuss the software requirements for that automated data processing at the level of cyber-infrastructures with sensor calibration and control, data banking, and ingestion into large data portals.Peer ReviewedPostprint (published version

Feedback Control Goes Wireless: Guaranteed Stability over Low-power Multi-hop Networks

Closing feedback loops fast and over long distances is key to emerging applications; for example, robot motion control and swarm coordination require update intervals of tens of milliseconds. Low-power wireless technology is preferred for its low cost, small form factor, and flexibility, especially if the devices support multi-hop communication. So far, however, feedback control over wireless multi-hop networks has only been shown for update intervals on the order of seconds. This paper presents a wireless embedded system that tames imperfections impairing control performance (e.g., jitter and message loss), and a control design that exploits the essential properties of this system to provably guarantee closed-loop stability for physical processes with linear time-invariant dynamics. Using experiments on a cyber-physical testbed with 20 wireless nodes and multiple cart-pole systems, we are the first to demonstrate and evaluate feedback control and coordination over wireless multi-hop networks for update intervals of 20 to 50 milliseconds.Comment: Accepted final version to appear in: 10th ACM/IEEE International Conference on Cyber-Physical Systems (with CPS-IoT Week 2019) (ICCPS '19), April 16--18, 2019, Montreal, QC, Canad

Design of a multiple bloom filter for distributed navigation routing

Unmanned navigation of vehicles and mobile robots can be greatly simplified by providing environmental intelligence with dispersed wireless sensors. The wireless sensors can work as active landmarks for vehicle localization and routing. However, wireless sensors are often resource scarce and require a resource-saving design. In this paper, a multiple Bloom-filter scheme is proposed to compress a global routing table for a wireless sensor. It is used as a lookup table for routing a vehicle to any destination but requires significantly less memory space and search effort. An error-expectation-based design for a multiple Bloom filter is proposed as an improvement to the conventional false-positive-rate-based design. The new design is shown to provide an equal relative error expectation for all branched paths, which ensures a better network load balance and uses less memory space. The scheme is implemented in a project for wheelchair navigation using wireless camera motes. © 2013 IEEE

Continuous maintenance and the future – Foundations and technological challenges

High value and long life products require continuous maintenance throughout their life cycle to achieve required performance with optimum through-life cost. This paper presents foundations and technologies required to offer the maintenance service. Component and system level degradation science, assessment and modelling along with life cycle ‘big data’ analytics are the two most important knowledge and skill base required for the continuous maintenance. Advanced computing and visualisation technologies will improve efficiency of the maintenance and reduce through-life cost of the product. Future of continuous maintenance within the Industry 4.0 context also identifies the role of IoT, standards and cyber security

Collective gas sensing in a cyber-physical system

This paper discusses a novel collective sensing approach using autonomous sensors specially designed to monitor gas leaks and search for gas sources. The proposed collective behavior aims to improve the gas-source search by sharing information between mobile sensors and reducing the risks associated with gas leakage. The group acts as a composite sensor that can move independently to search for an optimal sensing zone. The autonomous searching behavior is bio-inspired by colonies of bacteria that continuously seek energy sources throughout their existence. Each sensor makes its own autonomous search decision, considering the group sense, to move in the direction of a better energy source. The collective approach is based on autonomous agents sharing information to achieve a collective sense of gas perception and utilizes more intelligent searching. The method is evaluated in a cyber-physical system specially developed to safely experiment with gases and mobile sensors while reproducing the realistic dynamic behavior of the gas. Experiments are performed to clarify the collective gas-sensing contributions, and the gas search is compared through multiple mobile sensors with and without collective sensing. The proposed approach is evaluated in an unhealthy environment to elucidate its effectiveness. In addition to presenting the related differences between collective and individual sensory approaches, this work contributes with analyzes of the scalability of mobile gas sensing systems. This work also contributed as a simulated semi-physical experimental system to test algorithms' performance before applying it to practice. © 2001-2012 IEEEinfo:eu-repo/semantics/publishedVersio

Cyber-Physical Systems: A Model-Based Approach

In this concise yet comprehensive Open Access textbook, future inventors are introduced to the key concepts of Cyber-Physical Systems (CPS). Using modeling as a way to develop deeper understanding of the computational and physical components of these systems, one can express new designs in a way that facilitates their simulation, visualization, and analysis. Concepts are introduced in a cross-disciplinary way. Leveraging hybrid (continuous/discrete) systems as a unifying framework and Acumen as a modeling environment, the book bridges the conceptual gap in modeling skills needed for physical systems on the one hand and computational systems on the other. In doing so, the book gives the reader the modeling and design skills they need to build smart, IT-enabled products. Starting with a look at various examples and characteristics of Cyber-Physical Systems, the book progresses to explain how the area brings together several previously distinct ones such as Embedded Systems, Control Theory, and Mechatronics. Featuring a simulation-based project that focuses on a robotics problem (how to design a robot that can play ping-pong) as a useful example of a CPS domain, Cyber-Physical Systems: A Model-Based Approach demonstrates the intimate coupling between cyber and physical components, and how designing robots reveals several non-trivial control problems, significant embedded and real-time computation requirements, and a need to consider issues of communication and preconceptions

Digital-Twins towards Cyber-Physical Systems: A Brief Survey

Cyber-Physical Systems (CPS) are integrations of computation and physical processes. Physical processes are monitored and controlled by embedded computers and networks, which frequently have feedback loops where physical processes affect computations and vice versa. To ease the analysis of a system, the costly physical plants can be replaced by the high-fidelity virtual models that provide a framework for Digital-Twins (DT). This paper aims to briefly review the state-of-the-art and recent developments in DT and CPS. Three main components in CPS, including communication, control, and computation, are reviewed. Besides, the main tools and methodologies required for implementing practical DT are discussed by following the main applications of DT in the fourth industrial revolution through aspects of smart manufacturing, sixth wireless generation (6G), health, production, energy, and so on. Finally, the main limitations and ideas for future remarks are talked about followed by a short guideline for real-world application of DT towards CPS