An automated and improved methodology to retrieve long-time series of evapotranspiration based on remote sensing and reanalysis data

The large-scale quantification of accurate evapotranspiration (ET) time series has substantially been developed in recent decades using automated approaches based on remote sensing data. However, there are still several model-related uncertainties that require precise assessment. In this study, the Surface Energy Balance Algorithm for Land (SEBAL) and meteorological data from the Global Land Data Assimilation System (GLDAS) were used to estimate long-term daily actual ET based on three endmember selection procedures: two land cover-based models, one with (WF) and the other without (WOF) morphological functions, and the Allen method (with the default percentiles) for 2270 Landsat images. Models were evaluated for 23 flux tower sites with four main vegetation cover types as well as different climate types. Results showed that endmember selection with morphological functions (WF_ET) generally performed better than the other endmember approaches. Climate-based classification assessment provided the clearest discrimination between the performance of the different endmember selection approaches for the humid category. For humid zones, the land cover-based methods, especially WF, appropriately outperformed Allen. However, the performance of the three approaches was similar for sub-humid, semi-arid and arid climates together; the Allen approach was therefore recommended to avoid the need for dependency on land cover maps. Tower-by-tower validation also showed that the WF approach performed best at 12 flux tower sites, the WOF approach best at 5 and the Allen approach best at 6, suggesting that the use of land cover maps alone does not explain the differences between the performance of the land cover-based models and the Allen approach. Additionally, the satisfactory error metrics results when comparing the EC estimations with EC measurements, with root mean square error (RMSE) ≈ 0.91 and 1.59 mm·day−1, coefficient of determination (R2) ≈ 0.71 and 0.41, and bias percentage (PBias) ≈ 2% and 60% for crop and non-crop flux tower sites, respectively, supports the use of GLDAS meteorological forcing datasets with the different automated ET estimation approaches. Overall, given that the thorough evaluation of different endmember selection approaches at large scale confirmed the validity of the WF approach for different climate and land cover types, this study can be considered an important contribution to the global retrieval of long time series of ETinfo:eu-repo/semantics/publishedVersio

Incorporating an iterative energy restraint for the Surface Energy Balance System (SEBS)

© 2017 Elsevier Inc. The Surface Energy Balance System (SEBS) has proven itself as an effective remotely sensed estimator of actual evapotranspiration (ETa). However, it has several vulnerabilities associated with the partitioning of the available energy (AE) at the land surface. We introduce a two stage energy restraint process into the SEBS algorithm (SEBS-ER) to overcome these vulnerabilities. The first offsets the remotely sensed surface temperature to ensure the surface to air temperature difference reflects AE, while the second stage uses a domain based image search process to identify and adjust the proportions of sensible (H) and latent (λE) heat flux with respect to AE. We effectively implemented SEBS-ER over 61 acquisitions over two Landsat tiles (path 90 row 84 and path 91 row 85) in south-eastern Australia that feature heterogeneous land covers. Across the two areas we showed that the SEBS-ER algorithm has: greater resilience to perturbed errors in surface energy balance algorithm inputs; significantly improved accuracy (p < 0.05) at two eddy covariance flux towers in heavily forested (RMSE 62.3 W m− 2, R2 0.879) and sub-alpine grassland (RMSE 33.2 W m− 2, R2 0.939) land covers; and greater temporal stability across 52 daily actual evapotranspiration (ETa) estimates compared to a temporally stable and independent ETa dataset. The energy restraint within SEBS-ER has reduced exposure to the complex errors and uncertainties within remotely sensed, meteorological, and land type SEBS inputs, providing more reliable and accurate spatially distributed ETa products

Parameterization of the Satellite-Based Model (METRIC) for the Estimation of Instantaneous Surface Energy Balance Components over a Drip-Irrigated Vineyard

A study was carried out to parameterize the METRIC (Mapping EvapoTranspiration at high Resolution with Internalized Calibration) model for estimating instantaneous values of albedo (shortwave albedo) (αi), net radiation (Rni) and soil heat flux (Gi), sensible (Hi) and latent heat (LEi) over a drip-irrigated Merlot vineyard (location: 35°25′ LS; 71°32′ LW; 125 m.a.s. (l). The experiment was carried out in a plot of 4.25 ha, processing 15 Landsat images, which were acquired from 2006 to 2009. An automatic weather station was placed inside the experimental plot to measure αi, Rni and Gi. In the same tower an Eddy Covariance (EC) system was mounted to measure Hi and LEi. Specific sub-models to estimate Gi, leaf area index (LAI) and aerodynamic roughness length for momentum transfer (zom) were calibrated for the Merlot vineyard as an improvement to the original METRIC model. Results indicated that LAI, zom and Gi were estimated using the calibrated functions with errors of 4%, 2% and 17%, while those were computed using the original functions with errors of 58%, 81%, and 5%, respectively. At the time of satellite overpass, comparisons between measured and estimated values indicated that METRIC overestimated αi in 21% and Rni in 11%. Also, METRIC using the calibrated functions overestimated Hi and LEi with errors of 16% and 17%, respectively while it using the original functions overestimated Hi and LEi with errors of 13% and 15%, respectively. Finally, LEi was estimated with root mean square error (RMSE) between 43 and 60 W·m−2 and mean absolute error (MAE) between 35 and 48 W·m−2 for both calibrated and original functions, respectively. These results suggested that biases observed for instantaneous pixel-by-pixel values of Rni, Gi and other intermediate components of the algorithm were presumably absorbed into the computation of sensible heat flux as a result of the internal self-calibration of METRIC

Evapotranspiration Estimates Derived Using Multi-Platform Remote Sensing in a Semiarid Region

Evapotranspiration (ET) is a key component of the water balance, especially in arid and semiarid regions. The current study takes advantage of spatially-distributed, near real-time information provided by satellite remote sensing to develop a regional scale ET product derived from remotely-sensed observations. ET is calculated by scaling PET estimated from Moderate Resolution Imaging Spectroradiometer (MODIS) products with downscaled soil moisture derived using the Soil Moisture Ocean Salinity (SMOS) satellite and a second order polynomial regression formula. The MODis-Soil Moisture ET (MOD-SMET) estimates are validated using four flux tower sites in southern Arizona USA, a calibrated empirical ET model, and model output from Version 2 of the North American Land Data Assimilation System (NLDAS-2). Validation against daily eddy covariance ET indicates correlations between 0.63 and 0.83 and root mean square errors (RMSE) between 40 and 96 W/m2. MOD-SMET estimates compare well to the calibrated empirical ET model, with a −0.14 difference in correlation between sites, on average. By comparison, NLDAS-2 models underestimate daily ET compared to both flux towers and MOD-SMET estimates. Our analysis shows the MOD-SMET approach to be effective for estimating ET. Because it requires limited ancillary ground-based data and no site-specific calibration, the method is applicable to regions where ground-based measurements are not available

Assessment and Development of Remotely Sensed Evapotranspiration Modeling Approaches

Remote sensing has been a promising approach to extracting distributed evapotranspiration (ET) information at varying spatial and temporal scales. Performances of several vegetation index (VI) based and remotely sensed surface energy balance (RSEB) models were evaluated to identify simple and accurate models and apply them to study ET variations from field to regional scales. A simple VI model using a single Landsat image to estimate annual ET was evaluated and successfully captured inter-annual riparian ET variations along a section of the Colorado River, U.S. The study showed the applicability of a simple and accurate approach for annual ET estimation with fewer data and resources. A modeling framework was developed to derive daily time series of ET maps using a RSEB model, satellite imagery, and ground-based weather data. The daily and annual ET maps obtained from the modeling framework successfully captured spatial and temporal ET variations across Oklahoma, U.S. The model also identified the regions that are more susceptible to droughts. Finally, five RSEB models were evaluated for their performance in estimating daily ET of winter wheat under variable grazing and tillage practices in central Oklahoma. The surface energy balance algorithm for land (SEBAL) had the best agreement whit eddy covariance estimates. The daily ET estimates from SEBAL captured the field-scale ET variations within grazing/tillage managements. All studies conducted based on VI and RSEB models over different land covers and spatial/temporal scales identified advantages and limitations of models and developed a framework to construct time series of ET maps, which has a wide range of applications