Visuohaptic Simulation of a Borescope for Aircraft Engine Inspection

Consisting of a long, fiber optic probe containing a small CCD camera controlled by hand-held articulation interface, a video borescope is used for remote visual inspection of hard to reach components in an aircraft. The knowledge and psychomotor skills, specifically the hand-eye coordination, required for effective inspection are hard to acquire through limited exposure to the borescope in aviation maintenance schools. Inexperienced aircraft maintenance technicians gain proficiency through repeated hands-on learning in the workplace along a steep learning curve while transitioning from the classroom to the workforce. Using an iterative process combined with focused user evaluations, this dissertation details the design, implementation and evaluation of a novel visuohaptic simulator for training novice aircraft maintenance technicians in the task of engine inspection using a borescope. First, we describe the development of the visual components of the simulator, along with the acquisition and modeling of a representative model of a {PT-6} aircraft engine. Subjective assessments with both expert and novice aircraft maintenance engineers evaluated the visual realism and the control interfaces of the simulator. In addition to visual feedback, probe contact feedback is provided through a specially designed custom haptic interface that simulates tip contact forces as the virtual probe intersects with the {3D} model surfaces of the engine. Compared to other haptic interfaces, the custom design is unique in that it is inexpensive and uses a real borescope probe to simulate camera insertion and withdrawal. User evaluation of this simulator with probe tip feedback suggested a trend of improved performance with haptic feedback. Next, we describe the development of a physically-based camera model for improved behavioral realism of the simulator. Unlike a point-based camera, the enhanced camera model simulates the interaction of the borescope probe, including multiple points of contact along the length of the probe. We present visual comparisons of a real probe\u27s motion with the simulated probe model and develop a simple algorithm for computing the resultant contact forces. User evaluation comparing our custom haptic device with two commonly available haptic devices, the Phantom Omni and the Novint Falcon, suggests that the improved camera model as well as probe contact feedback with the 3D engine model plays a significant role in the overall engine inspection process. Finally, we present results from a skill transfer study comparing classroom-only instruction with both simulator and hands-on training. Students trained using the simulator and the video borescope completed engine inspection using the real video borescope significantly faster than students who received classroom-only training. The speed improvements can be attributed to reduced borescope probe maneuvering time within the engine and improved psychomotor skills due to training. Given the usual constraints of limited time and resources, simulator training may provide beneficial skills needed by novice aircraft maintenance technicians to augment classroom instruction, resulting in a faster transition into the aviation maintenance workforce

Design and development of a VR system for exploration of medical data using haptic rendering and high quality visualization

[no abstract

Modelling and simulation of flexible instruments for minimally invasive surgical training in virtual reality

Improvements in quality and safety standards in surgical training, reduction in training hours and constant technological advances have challenged the traditional apprenticeship model to create a competent surgeon in a patient-safe way. As a result, pressure on training outside the operating room has increased. Interactive, computer based Virtual Reality (VR) simulators offer a safe, cost-effective, controllable and configurable training environment free from ethical and patient safety issues. Two prototype, yet fully-functional VR simulator systems for minimally invasive procedures relying on flexible instruments were developed and validated. NOViSE is the first force-feedback enabled VR simulator for Natural Orifice Transluminal Endoscopic Surgery (NOTES) training supporting a flexible endoscope. VCSim3 is a VR simulator for cardiovascular interventions using catheters and guidewires. The underlying mathematical model of flexible instruments in both simulator prototypes is based on an established theoretical framework – the Cosserat Theory of Elastic Rods. The efficient implementation of the Cosserat Rod model allows for an accurate, real-time simulation of instruments at haptic-interactive rates on an off-the-shelf computer. The behaviour of the virtual tools and its computational performance was evaluated using quantitative and qualitative measures. The instruments exhibited near sub-millimetre accuracy compared to their real counterparts. The proposed GPU implementation further accelerated their simulation performance by approximately an order of magnitude. The realism of the simulators was assessed by face, content and, in the case of NOViSE, construct validity studies. The results indicate good overall face and content validity of both simulators and of virtual instruments. NOViSE also demonstrated early signs of construct validity. VR simulation of flexible instruments in NOViSE and VCSim3 can contribute to surgical training and improve the educational experience without putting patients at risk, raising ethical issues or requiring expensive animal or cadaver facilities. Moreover, in the context of an innovative and experimental technique such as NOTES, NOViSE could potentially facilitate its development and contribute to its popularization by keeping practitioners up to date with this new minimally invasive technique.Open Acces

Development of A Kinetic Model For Loop-Free Colonoscopy Technology

The colonoscope is an important tool in diagnosis and management of diseases of the colon. One of the ongoing challenges with this device is that the colonoscope may form a loop together with the colon during the procedure. The result of the loop is that further insertion of the scope in the colon may not be possible. The loop may also cause risks of perforation of the colon and pain in the patient. There are currently several existing devices to overcome loop formation in colonoscopy, some of which have been introduced in clinical work. However, empirical assessment shows that these devices do not work very well. This is the motivation for the research presented in this thesis. In this thesis, a new paradigm of thinking, “doctor-assisted colonoscopy,” is proposed to overcome loop formation. In this new approach, the physician’s role is enhanced with new information that is acquired by sensors outside the human body and inferred from the mathematical model. It is referred to as a kinetic model due to the fact that this model describes the kinetic behaviour of the scope. This thesis is devoted to development of this kinetic model. In this study, the model of the colonoscope and the model of the colon are developed based on the Timoshenko beam theory, and parameters in both models are determined by the experiments. The following conclusions then are made: (1) self-locking of the colonoscope is the most basic cause for a loop to occur, while structural instability of the colonsocope is dependent on the self-locking; (2) both the scope and the colon can be well represented with the Timoshenko beam elements and the Linear Complementary Problem (LCP) formulation derived from Signorini’s law, and Coulom’s law for representation of interactions between the colon and scope is adequate; (3) there are effects from the location, looping, and tip deflection of the scope on flexural rigidity of the scope. Approximately, the flexural rigidity of the CF-Q160L colonoscope ranges from 300 to 650 N•cm2, and its accuracy is proven by a good agreement between the model predicted result and experimental result; (4) Rayleigh damping for the CF-Q160L colonoscope depends more on the mass matrix [M] of the colonoscope than the stiffness matrix [K], which is evident by the large coefficient value of “alpha” (0.3864) and the small coefficient value of “beta” (0.0164). The contributions of this thesis are: (1) the finding that the main cause of the loop is not structural instability of the colonoscope but rather self-locking of the colonoscope, which could lead to design of a “new-generation” colonoscope to avoid the loop; (2) a systematic evaluation of the existing colonoscopy technologies based on the well-proven Axiomatic Design Theory (ADT), which will serve as a guideline for the development of future new colonoscopes in future; (3) an approach to developing a kinetic model of the colonoscope useful to modeling similar objects such as a catheter guide-wire; (4) a novel ex-vivo colonoscopy test-bed with the kinetic and kinematic measurements useful for validation of new designs in colonoscopy technology and also useful for training physicians who perform the colonoscopy procedure; and (5) a new paradigm of thinking for colonoscopy called “doctor-assisted colonoscopy,” which has potential applications to other medical procedures such as catheter-based procedures

3D Multimodal Interaction with Physically-based Virtual Environments

The virtual has become a huge field of exploration for researchers: it could assist the surgeon, help the prototyping of industrial objects, simulate natural phenomena, be a fantastic time machine or entertain users through games or movies. Far beyond the only visual rendering of the virtual environment, the Virtual Reality aims at -literally- immersing the user in the virtual world. VR technologies simulate digital environments with which users can interact and, as a result, perceive through different modalities the effects of their actions in real time. The challenges are huge: the user's motions need to be perceived and to have an immediate impact on the virtual world by modifying the objects in real-time. In addition, the targeted immersion of the user is not only visual: auditory or haptic feedback needs to be taken into account, merging all the sensory modalities of the user into a multimodal answer. The global objective of my research activities is to improve 3D interaction with complex virtual environments by proposing novel approaches for physically-based and multimodal interaction. I have laid the foundations of my work on designing the interactions with complex virtual worlds, referring to a higher demand in the characteristics of the virtual environments. My research could be described within three main research axes inherent to the 3D interaction loop: (1) the physically-based modeling of the virtual world to take into account the complexity of the virtual object behavior, their topology modifications as well as their interactions, (2) the multimodal feedback for combining the sensory modalities into a global answer from the virtual world to the user and (3) the design of body-based 3D interaction techniques and devices for establishing the interfaces between the user and the virtual world. All these contributions could be gathered in a general framework within the 3D interaction loop. By improving all the components of this framework, I aim at proposing approaches that could be used in future virtual reality applications but also more generally in other areas such as medical simulation, gesture training, robotics, virtual prototyping for the industry or web contents.Le virtuel est devenu un vaste champ d'exploration pour la recherche et offre de nos jours de nombreuses possibilités : assister le chirurgien, réaliser des prototypes de pièces industrielles, simuler des phénomènes naturels, remonter dans le temps ou proposer des applications ludiques aux utilisateurs au travers de jeux ou de films. Bien plus que le rendu purement visuel d'environnement virtuel, la réalité virtuelle aspire à -littéralement- immerger l'utilisateur dans le monde virtuel. L'utilisateur peut ainsi interagir avec le contenu numérique et percevoir les effets de ses actions au travers de différents retours sensoriels. Permettre une véritable immersion de l'utilisateur dans des environnements virtuels de plus en plus complexes confronte la recherche en réalité virtuelle à des défis importants: les gestes de l'utilisateur doivent être capturés puis directement transmis au monde virtuel afin de le modifier en temps-réel. Les retours sensoriels ne sont pas uniquement visuels mais doivent être combinés avec les retours auditifs ou haptiques dans une réponse globale multimodale. L'objectif principal de mes activités de recherche consiste à améliorer l'interaction 3D avec des environnements virtuels complexes en proposant de nouvelles approches utilisant la simulation physique et exploitant au mieux les différentes modalités sensorielles. Dans mes travaux, je m'intéresse tout particulièrement à concevoir des interactions avec des mondes virtuels complexes. Mon approche peut être décrite au travers de trois axes principaux de recherche: (1) la modélisation dans les mondes virtuels d'environnements physiques plausibles où les objets réagissent de manière naturelle, même lorsque leur topologie est modifiée ou lorsqu'ils sont en interaction avec d'autres objets, (2) la mise en place de retours sensoriels multimodaux vers l'utilisateur intégrant des composantes visuelles, haptiques et/ou sonores, (3) la prise en compte de l'interaction physique de l'utilisateur avec le monde virtuel dans toute sa richesse : mouvements de la tête, des deux mains, des doigts, des jambes, voire de tout le corps, en concevant de nouveaux dispositifs ou de nouvelles techniques d'interactions 3D. Les différentes contributions que j'ai proposées dans chacun de ces trois axes peuvent être regroupées au sein d'un cadre plus général englobant toute la boucle d'interaction 3D avec les environnements virtuels. Elles ouvrent des perspectives pour de futures applications en réalité virtuelle mais également plus généralement dans d'autres domaines tels que la simulation médicale, l'apprentissage de gestes, la robotique, le prototypage virtuel pour l'industrie ou bien les contenus web

3D Multimodal Interaction with Physically-based Virtual Environments

The virtual has become a huge field of exploration for researchers: it could assist the surgeon, help the prototyping of industrial objects, simulate natural phenomena, be a fantastic time machine or entertain users through games or movies. Far beyond the only visual rendering of the virtual environment, the Virtual Reality aims at -literally- immersing the user in the virtual world. VR technologies simulate digital environments with which users can interact and, as a result, perceive through different modalities the effects of their actions in real time. The challenges are huge: the user's motions need to be perceived and to have an immediate impact on the virtual world by modifying the objects in real-time. In addition, the targeted immersion of the user is not only visual: auditory or haptic feedback needs to be taken into account, merging all the sensory modalities of the user into a multimodal answer. The global objective of my research activities is to improve 3D interaction with complex virtual environments by proposing novel approaches for physically-based and multimodal interaction. I have laid the foundations of my work on designing the interactions with complex virtual worlds, referring to a higher demand in the characteristics of the virtual environments. My research could be described within three main research axes inherent to the 3D interaction loop: (1) the physically-based modeling of the virtual world to take into account the complexity of the virtual object behavior, their topology modifications as well as their interactions, (2) the multimodal feedback for combining the sensory modalities into a global answer from the virtual world to the user and (3) the design of body-based 3D interaction techniques and devices for establishing the interfaces between the user and the virtual world. All these contributions could be gathered in a general framework within the 3D interaction loop. By improving all the components of this framework, I aim at proposing approaches that could be used in future virtual reality applications but also more generally in other areas such as medical simulation, gesture training, robotics, virtual prototyping for the industry or web contents.Le virtuel est devenu un vaste champ d'exploration pour la recherche et offre de nos jours de nombreuses possibilités : assister le chirurgien, réaliser des prototypes de pièces industrielles, simuler des phénomènes naturels, remonter dans le temps ou proposer des applications ludiques aux utilisateurs au travers de jeux ou de films. Bien plus que le rendu purement visuel d'environnement virtuel, la réalité virtuelle aspire à -littéralement- immerger l'utilisateur dans le monde virtuel. L'utilisateur peut ainsi interagir avec le contenu numérique et percevoir les effets de ses actions au travers de différents retours sensoriels. Permettre une véritable immersion de l'utilisateur dans des environnements virtuels de plus en plus complexes confronte la recherche en réalité virtuelle à des défis importants: les gestes de l'utilisateur doivent être capturés puis directement transmis au monde virtuel afin de le modifier en temps-réel. Les retours sensoriels ne sont pas uniquement visuels mais doivent être combinés avec les retours auditifs ou haptiques dans une réponse globale multimodale. L'objectif principal de mes activités de recherche consiste à améliorer l'interaction 3D avec des environnements virtuels complexes en proposant de nouvelles approches utilisant la simulation physique et exploitant au mieux les différentes modalités sensorielles. Dans mes travaux, je m'intéresse tout particulièrement à concevoir des interactions avec des mondes virtuels complexes. Mon approche peut être décrite au travers de trois axes principaux de recherche: (1) la modélisation dans les mondes virtuels d'environnements physiques plausibles où les objets réagissent de manière naturelle, même lorsque leur topologie est modifiée ou lorsqu'ils sont en interaction avec d'autres objets, (2) la mise en place de retours sensoriels multimodaux vers l'utilisateur intégrant des composantes visuelles, haptiques et/ou sonores, (3) la prise en compte de l'interaction physique de l'utilisateur avec le monde virtuel dans toute sa richesse : mouvements de la tête, des deux mains, des doigts, des jambes, voire de tout le corps, en concevant de nouveaux dispositifs ou de nouvelles techniques d'interactions 3D. Les différentes contributions que j'ai proposées dans chacun de ces trois axes peuvent être regroupées au sein d'un cadre plus général englobant toute la boucle d'interaction 3D avec les environnements virtuels. Elles ouvrent des perspectives pour de futures applications en réalité virtuelle mais également plus généralement dans d'autres domaines tels que la simulation médicale, l'apprentissage de gestes, la robotique, le prototypage virtuel pour l'industrie ou bien les contenus web

Haptics Rendering and Applications

There has been significant progress in haptic technologies but the incorporation of haptics into virtual environments is still in its infancy. A wide range of the new society's human activities including communication, education, art, entertainment, commerce and science would forever change if we learned how to capture, manipulate and reproduce haptic sensory stimuli that are nearly indistinguishable from reality. For the field to move forward, many commercial and technological barriers need to be overcome. By rendering how objects feel through haptic technology, we communicate information that might reflect a desire to speak a physically- based language that has never been explored before. Due to constant improvement in haptics technology and increasing levels of research into and development of haptics-related algorithms, protocols and devices, there is a belief that haptics technology has a promising future

Haptic interaction with deformable objects using real-time dynamic simulation

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1995.Includes bibliographical references (p. 81-83).by Nitish Swarup.M.S

Simulating molecular docking with haptics

Intermolecular binding underlies various metabolic and regulatory processes of the cell, and the therapeutic and pharmacological properties of drugs. Molecular docking systems model and simulate these interactions in silico and allow the study of the binding process. In molecular docking, haptics enables the user to sense the interaction forces and intervene cognitively in the docking process. Haptics-assisted docking systems provide an immersive virtual docking environment where the user can interact with the molecules, feel the interaction forces using their sense of touch, identify visually the binding site, and guide the molecules to their binding pose. Despite a forty-year research e�ort however, the docking community has been slow to adopt this technology. Proprietary, unreleased software, expensive haptic hardware and limits on processing power are the main reasons for this. Another signi�cant factor is the size of the molecules simulated, limited to small molecules. The focus of the research described in this thesis is the development of an interactive haptics-assisted docking application that addresses the above issues, and enables the rigid docking of very large biomolecules and the study of the underlying interactions. Novel methods for computing the interaction forces of binding on the CPU and GPU, in real-time, have been developed. The force calculation methods proposed here overcome several computational limitations of previous approaches, such as precomputed force grids, and could potentially be used to model molecular exibility at haptic refresh rates. Methods for force scaling, multipoint collision response, and haptic navigation are also reported that address newfound issues, particular to the interactive docking of large systems, e.g. force stability at molecular collision. The i ii result is a haptics-assisted docking application, Haptimol RD, that runs on relatively inexpensive consumer level hardware, (i.e. there is no need for specialized/proprietary hardware)

Animation, Simulation, and Control of Soft Characters using Layered Representations and Simplified Physics-based Methods

Realistic behavior of computer generated characters is key to bringing virtual environments, computer games, and other interactive applications to life. The plausibility of a virtual scene is strongly influenced by the way objects move around and interact with each other. Traditionally, actions are limited to motion capture driven or pre-scripted motion of the characters. Physics enhance the sense of realism: physical simulation is required to make objects act as expected in real life. To make gaming and virtual environments truly immersive,it is crucial to simulate the response of characters to collisions and to produce secondary effects such as skin wrinkling and muscle bulging. Unfortunately, existing techniques cannot generally achieve these effects in real time, do not address the coupled response of a character's skeleton and skin to collisions nor do they support artistic control. In this dissertation, I present interactive algorithms that enable physical simulation of deformable characters with high surface detail and support for intuitive deformation control. I propose a novel unified framework for real-time modeling of soft objects with skeletal deformations and surface deformation due to contact, and their interplay for object surfaces with up to tens of thousands of degrees of freedom.I make use of layered models to reduce computational complexity. I introduce dynamic deformation textures, which map three dimensional deformations in the deformable skin layer to a two dimensional domain for extremely efficient parallel computation of the dynamic elasticity equations and optimized hierarchical collision detection. I also enhance layered models with responsive contact handling, to support the interplay between skeletal motion and surface contact and the resulting two-way coupling effects. Finally, I present dynamic morph targets, which enable intuitive control of dynamic skin deformations at run-time by simply sculpting pose-specific surface shapes. The resulting framework enables real-time and directable simulation of soft articulated characters with frictional contact response, capturing the interplay between skeletal dynamics and complex,non-linear skin deformations