Dimmable LED Driver For DC Distributed Lighting System

This Abstract proposes a high brightness, high efficiency, dimmable LED driver based on linear current regulator technology for DC grid distribution systems. The proposed driver has excellent characteristics like the highest lumen per watt, long lifetime, high reliability, compact, low cost, both environmental and user-friendly which makes it suitable for lighting applications. Steady-state and small-signal models of the proposed driver is performed which helps in minimizing ground current and accurate compensator design, respectively. These two modeling approaches result in the optimization of both the footprint and cost of the driver. The performance of the proposed Experimental prototype of the 20W driver developed to validate the performance at different dimming levels and achieves maximum efficiency of 97%. the applications of the proposed converter are: dimmable home lighting system, advertisement boards and hoardings, industrial lighting systems, road transport indication lamps, indoor and outdoor stadium lighting, automatic street lighting, decorative systems, health appliances and auditoriums and many mor

Design and Control of Power Converters 2019

In this book, 20 papers focused on different fields of power electronics are gathered. Approximately half of the papers are focused on different control issues and techniques, ranging from the computer-aided design of digital compensators to more specific approaches such as fuzzy or sliding control techniques. The rest of the papers are focused on the design of novel topologies. The fields in which these controls and topologies are applied are varied: MMCs, photovoltaic systems, supercapacitors and traction systems, LEDs, wireless power transfer, etc

Tracking Control of Shape-Memory-Alloy Actuators Based on Self-Sensing Feedback and Inverse Hysteresis Compensation

Shape memory alloys (SMAs) offer a high power-to-weight ratio, large recovery strain, and low driving voltages, and have thus attracted considerable research attention. The difficulty of controlling SMA actuators arises from their highly nonlinear hysteresis and temperature dependence. This paper describes a combination of self-sensing and model-based control, where the model includes both the major and minor hysteresis loops as well as the thermodynamics effects. The self-sensing algorithm uses only the power width modulation (PWM) signal and requires no heavy equipment. The method can achieve high-accuracy servo control and is especially suitable for miniaturized applications

Quantization noise analysis of a closed-loop PWM controller that includes Σ-Δ modulation

Σ-Δ modulation is a popular noise shaping technique which is used to move the quantization noise out of the frequency band of interest. Recently, a number of authors have applied this technique to a pulse width modulation (PWM) controller for switching power converters. However, previous analysis has not incorporated the effects of analog-to-digital converter (ADC) resolution or feedback control on the Σ-Δ modulator. In this work, quantization due to ADC resolution and PWM resolution are analyzed, considering the effects of noise-shaping and feedback. A number of simulations have been performed to explore the impact of various design choices on output noise. The study variables included the order of the Σ-Δ modulator, resolution of ADC, resolution of DPWM, the plant and the compensator. The theoretical model developed is used to generate the expected system Power Spectral Density (PSD) curves for each design choice and simulations techniques are used to validate the analysis. Experimental analysis has been performed on a digital voltage-mode control (VMC) synchronous buck converter and the output voltage PSD curves are generated using the welch method and compared with the theoretical and the simulation results. The experimental PSD curves for the 1st-order modulator match the simulation and theoretical PSD curves. This suggests that the theoretical model is a useful approximation and similar methods can be used to analyze the contribution of the quantizers to the output noise of a closed-loop controller system --Abstract, page iii

Design and Analysis of High Frequency Power Converters for Envelope Tracking Applications

In the field of power electronics, designers are constantly researching new methods to improve efficiency while optimizing dynamic performance. As communication technologies progress we are more often dealing with systems of increasing speed and complexity. For instance, from 1991 to 2013 we have observed the mobile broadband communication sector evolve from ~230 Kbits/s (2G) speeds to ~100 Mbits/s (4G LTE), a 430% increase in communication speed. In contrast, we have not observed the same evolutionary development in industrial power converters. Most switch-mode power supplies are still manufactured for 100 KHz to 800 KHz operating frequencies. The main reason for this is that most electrical devices only require steady-state DC power, so high speed conversion performance is largely unnecessary. But as size expectations for portable electronic devices continue to decrease, the only way to meet future demand is to realize power electronics that operate at much higher switching frequencies. Furthermore there is increasing demand to improve the transient response requirements in processor-based systems and achieve practical envelope tracking in RF communication systems. The most straightforward method of increasing the dynamic response for these systems is to increase the switching frequency of the power electronics in a sustainable and coherent manner

Discrete time control of a push-pull power converter

The objective is the design of a discrete time controller in a push-pull power converter. The work figures out the issues related to the migration of the analog control to the digital one in power converters and both simulation and experimental results are performed to obtain a comparative evaluation of both proposals.This work apply digital control techniques in a DC/DC push-pull power converter. Sections include converter modelization, control design, simulations, implementation and experimental results

Design of High Power Converter with SiC MOSFETs

Tato diplomová práce se zabývá návrhem výkonového měniče založeného na topologii typu synchronní buck. Měnič je zkonstruován s využitím MOSFET tranzistorů na bázi silikon karbidu. Tato práce se věnuje analýze měniče s cílem navrhnout a realizovat řídící jednotku umožňující jak zpětnovazební regulaci měniče, tak řízení v otevřené smyčce. Za tímto účelem je odvozen analytický model měniče coby dynamického systému, který je použit pro návrh a simulaci řízení. Kontrolní jednotka je implementována s využitím 32 bitového mikrořadiče založeného na architektuře ARM. V této práci je poskytnut popis a použití klíčových periférií mikrořadiče pro realizaci řízení. Na závěr jsou shrnuty výsledky měření dynamického chování výkonových tranzistorů při provozu měniče. Pozornost je především věnována měření proudu tekoucího jedním tranzistorem s využitím běžného rezistoru pro snímání proudu a kompenzaci frekvenční charakteristiky rezistoru.This master degree thesis is concerned with the design of high power converter. The converter is based on synchronous buck topology and is realized using silicon carbide MOSFET transistors. This work deals with an analysis of such type of converter to design and realize a control unit providing feedback control of the converter. Therefore, a dynamic model of the converter is derived using a conventional technique of averaged state space modeling. The derived model is used for controller design and closed-loop control simulation. The control unit is implemented using a 32-bit ARM-based microcontroller. Hence, an insight into the microcontroller key peripherals is provided as well as a brief overview of the firmware architecture. This work concludes by a brief investigation of switching waveforms of SiC MOSFETs acquired during the converter operation. Attention is called to a transistor current measurement with a low-cost current sensing resistor and its frequency characteristic compensation

Design and fabrication of a long-life Stirling cycle cooler for space application. Phase 3: Prototype model

A second-generation, Stirling-cycle cryocooler (cryogenic refrigerator) for space applications, with a cooling capacity of 5 watts at 65 K, was recently completed. The refrigerator, called the Prototype Model, was designed with a goal of 5 year life with no degradation in cooling performance. The free displacer and free piston of the refrigerator are driven directly by moving-magnet linear motors with the moving elements supported by active magnetic bearings. The use of clearance seals and the absence of outgassing material in the working volume of the refrigerator enable long-life operation with no deterioration in performance. Fiber-optic sensors detect the radial position of the shafts and provide a control signal for the magnetic bearings. The frequency, phase, stroke, and offset of the compressor and expander are controlled by signals from precision linear position sensors (LVDTs). The vibration generated by the compressor and expander is cancelled by an active counter balance which also uses a moving-magnet linear motor and magnetic bearings. The driving signal for the counter balance is derived from the compressor and expander position sensors which have wide bandwidth for suppression of harmonic vibrations. The efficiency of the three active members, which operate in a resonant mode, is enhanced by a magnetic spring in the expander and by gas springs in the compressor and counterbalance. The cooling was achieved with a total motor input power of 139 watts. The magnetic-bearing stiffness was significantly increased from the first-generation cooler to accommodate shuttle launch vibrations