13,394 research outputs found
Wetting gradient induced separation of emulsions: A combined experimental and lattice Boltzmann computer simulation study
Guided motion of emulsions is studied via combined experimental and
theoretical investigations. The focus of the work is on basic issues related to
driving forces generated via a step-wise (abrupt) change in wetting properties
of the substrate along a given spatial direction. Experiments on binary
emulsions unambiguously show that selective wettability of the one of the fluid
components (water in our experiments) with respect to the two different parts
of the substrate is sufficient in order to drive the separation process. These
studies are accompanied by approximate analytic arguments as well as lattice
Boltzmann computer simulations, focusing on effects of a wetting gradient on
internal droplet dynamics as well as its relative strength compared to
volumetric forces driving the fluid flow. These theoretical investigations show
qualitatively different dependence of wetting gradient induced forces on
contact angle and liquid volume in the case of an open substrate as opposed to
a planar channel. In particular, for the parameter range of our experiments,
slit geometry is found to give rise to considerably higher separation forces as
compared to open substrate.Comment: 34 pages, 12 figure
Recommended from our members
Three-dimensional structure of I(to); Kv4.2-KChIP2 ion channels by electron microscopy at 21 Angstrom resolution.
Regulatory KChIP2 subunits assemble with pore-forming Kv4.2 subunits in 4:4 complexes to produce native voltage-gated potassium (Kv) channels like cardiac I(to) and neuronal I(A) subtypes. Here, negative stain electron microscopy (EM) and single particle averaging reveal KChIP2 to create a novel approximately 35 x 115 x 115 Angstrom, intracellular fenestrated rotunda: four peripheral columns that extend down from the membrane-embedded portion of the channel to enclose the Kv4.2 "hanging gondola" (a platform held beneath the transmembrane conduction pore by four internal columns). To reach the pore from the cytosol, ions traverse one of four external fenestrae to enter the rotundal vestibule and then cross one of four internal windows in the gondola
Modeling Dispersive Coupling and Losses of Localized Optical and Mechanical Modes in Optomechanical Crystals
Periodically structured materials can sustain both optical and mechanical
excitations which are tailored by the geometry. Here we analyze the properties
of dispersively coupled planar photonic and phononic crystals: optomechanical
crystals. In particular, the properties of co-resonant optical and mechanical
cavities in quasi-1D (patterned nanobeam) and quasi-2D (patterned membrane)
geometries are studied. It is shown that the mechanical Q and optomechanical
coupling in these structures can vary by many orders of magnitude with modest
changes in geometry. An intuitive picture is developed based upon a
perturbation theory for shifting material boundaries that allows the
optomechanical properties to be designed and optimized. Several designs are
presented with mechanical frequency ~ 1-10 GHz, optical Q-factor Qo > 10^7,
motional masses meff 100 femtograms, optomechanical coupling length LOM < 5
microns, and a radiation-limited mechanical Q-factor Qm > 10^7.Comment: 25 pages, 9 figure
Laser velocimetry in the low-speed wind tunnels at Ames Research Center
The historical development of laser velocimetry and its application to low-speed (less than 100 m/sec) aerodynamic flows in the subsonic wind tunnels at Ames Research Center is reviewed. A fully three dimensional velocimeter for the Ames 7- by 10-Foot Wind Tunnel is described, and its capabilities are presented through sample data from a recent experiment. Finally, a long-range (2.6 to 10 m) velocimeter that is designed to be installed within the test section of the Ames 40- by 80-Foot Wind Tunnel is described and sample data are presented
Imaging stress and magnetism at high pressures using a nanoscale quantum sensor
Pressure alters the physical, chemical and electronic properties of matter.
The development of the diamond anvil cell (DAC) enables tabletop experiments to
investigate a diverse landscape of high-pressure phenomena ranging from the
properties of planetary interiors to transitions between quantum mechanical
phases. In this work, we introduce and utilize a novel nanoscale sensing
platform, which integrates nitrogen-vacancy (NV) color centers directly into
the culet (tip) of diamond anvils. We demonstrate the versatility of this
platform by performing diffraction-limited imaging (~600 nm) of both stress
fields and magnetism, up to pressures ~30 GPa and for temperatures ranging from
25-340 K. For the former, we quantify all six (normal and shear) stress
components with accuracy GPa, offering unique new capabilities for
characterizing the strength and effective viscosity of solids and fluids under
pressure. For the latter, we demonstrate vector magnetic field imaging with
dipole accuracy emu, enabling us to measure the pressure-driven
phase transition in iron as well as the complex
pressure-temperature phase diagram of gadolinium. In addition to DC vector
magnetometry, we highlight a complementary NV-sensing modality using T1 noise
spectroscopy; crucially, this demonstrates our ability to characterize phase
transitions even in the absence of static magnetic signatures. By integrating
an atomic-scale sensor directly into DACs, our platform enables the in situ
imaging of elastic, electric and magnetic phenomena at high pressures.Comment: 18 + 50 pages, 4 + 19 figure
Integrated phased array systems in silicon
Silicon offers a new set of possibilities and challenges for RF, microwave, and millimeter-wave applications. While the high cutoff frequencies of the SiGe heterojunction bipolar transistors and the ever-shrinking feature sizes of MOSFETs hold a lot of promise, new design techniques need to be devised to deal with the realities of these technologies, such as low breakdown voltages, lossy substrates, low-Q passives, long interconnect parasitics, and high-frequency coupling issues. As an example of complete system integration in silicon, this paper presents the first fully integrated 24-GHz eight-element phased array receiver in 0.18-μm silicon-germanium and the first fully integrated 24-GHz four-element phased array transmitter with integrated power amplifiers in 0.18-μm CMOS. The transmitter and receiver are capable of beam forming and can be used for communication, ranging, positioning, and sensing applications
Linear laser diode arrays for improvement in optical disk recording for space stations
The design and fabrication of individually addressable laser diode arrays for high performance magneto-optic recording systems are presented. Ten diode arrays with 30 mW cW light output, linear light vs. current characteristics and single longitudinal mode spectrum were fabricated using channel substrate planar (CSP) structures. Preliminary results on the inverse CSP structure, whose fabrication is less critically dependent on device parameters than the CSP, are also presented. The impact of systems parameters and requirements, in particular, the effect of feedback on laser design is assessed, and techniques to reduce feedback or minimize its effect on systems performance, including mode-stabilized structures, are evaluated
- …