Optimizing energy-efficiency for multi-core packet processing systems in a compiler framework

Network applications become increasingly computation-intensive and the amount of traffic soars unprecedentedly nowadays. Multi-core and multi-threaded techniques are thus widely employed in packet processing system to meet the changing requirement. However, the processing power cannot be fully utilized without a suitable programming environment. The compilation procedure is decisive for the quality of the code. It can largely determine the overall system performance in terms of packet throughput, individual packet latency, core utilization and energy efficiency. The thesis investigated compilation issues in networking domain first, particularly on energy consumption. And as a cornerstone for any compiler optimizations, a code analysis module for collecting program dependency is presented and incorporated into a compiler framework. With that dependency information, a strategy based on graph bi-partitioning and mapping is proposed to search for an optimal configuration in a parallel-pipeline fashion. The energy-aware extension is specifically effective in enhancing the energy-efficiency of the whole system. Finally, a generic evaluation framework for simulating the performance and energy consumption of a packet processing system is given. It accepts flexible architectural configuration and is capable of performingarbitrary code mapping. The simulation time is extremely short compared to full-fledged simulators. A set of our optimization results is gathered using the framework

Hybrid analysis of memory references and its application to automatic parallelization

Executing sequential code in parallel on a multithreaded machine has been an elusive goal of the academic and industrial research communities for many years. It has recently become more important due to the widespread introduction of multicores in PCs. Automatic multithreading has not been achieved because classic, static compiler analysis was not powerful enough and program behavior was found to be, in many cases, input dependent. Speculative thread level parallelization was a welcome avenue for advancing parallelization coverage but its performance was not always optimal due to the sometimes unnecessary overhead of checking every dynamic memory reference. In this dissertation we introduce a novel analysis technique, Hybrid Analysis, which unifies static and dynamic memory reference techniques into a seamless compiler framework which extracts almost maximum available parallelism from scientific codes and incurs close to the minimum necessary run time overhead. We present how to extract maximum information from the quantities that could not be sufficiently analyzed through static compiler methods, and how to generate sufficient conditions which, when evaluated dynamically, can validate optimizations. Our techniques have been fully implemented in the Polaris compiler and resulted in whole program speedups on a large number of industry standard benchmark applications

Using data compression for increasing memory system utilization

Cataloged from PDF version of article.The memory system presents one of the critical challenges in embedded system design and optimization. This is mainly due to the ever-increasing code complexity of embedded applications and the exponential increase seen in the amount of data they manipulate. The memory bottleneck is even more important for multiprocessor-system-on-a-chip (MPSoC) architectures due to the high cost of off-chip memory accesses in terms of both energy and performance. As a result, reducing the memory-space occupancy of embedded applications is very important and will be even more important in the next decade. While it is true that the on-chip memory capacity of embedded systems is continuously increasing, the increases in the complexity of embedded applications and the sizes of the data sets they process are far greater. Motivated by this observation, this paper presents and evaluates a compiler-driven approach to data compression for reducing memory-space occupancy. Our goal is to study how automated compiler support can help in deciding the set of data elements to compress/decompress and the points during execution at which these compressions/decompressions should be performed. We first study this problem in the context of single-core systems and then extend it to MPSoCs where we schedule compressions and decompressions intelligently such that they do not conflict with application execution as much as possible. Particularly, in MPSoCs, one needs to decide which processors should participate in the compression and decompression activities at any given point during the course of execution. We propose both static and dynamic algorithms for this purpose. In the static scheme, the processors are divided into two groups: those performing compression/decompression and those executing the application, and this grouping is maintained throughout the execution of the application. In the dynamic scheme, on the other hand, the execution starts with some grouping but this grouping can change during the course of execution, depending on the dynamic variations in the data access pattern. Our experimental results show that, in a single-core system, the proposed approach reduces maximum memory occupancy by 47.9% and average memory occupancy by 48.3% when averaged over all the benchmarks. Our results also indicate that, in an MPSoC, the average energy saving is 12.7% when all eight benchmarks are considered. While compressions and decompressions and related bookkeeping activities take extra cycles and memory space and consume additional energy, we found that the improvements they bring from the memory space, execution cycles, and energy perspectives are much higher than these overheads

Performance and Memory Space Optimizations for Embedded Systems

Embedded systems have three common principles: real-time performance, low power consumption, and low price (limited hardware). Embedded computers use chip multiprocessors (CMPs) to meet these expectations. However, one of the major problems is lack of efficient software support for CMPs; in particular, automated code parallelizers are needed. The aim of this study is to explore various ways to increase performance, as well as reducing resource usage and energy consumption for embedded systems. We use code restructuring, loop scheduling, data transformation, code and data placement, and scratch-pad memory (SPM) management as our tools in different embedded system scenarios. The majority of our work is focused on loop scheduling. Main contributions of our work are: We propose a memory saving strategy that exploits the value locality in array data by storing arrays in a compressed form. Based on the compressed forms of the input arrays, our approach automatically determines the compressed forms of the output arrays and also automatically restructures the code. We propose and evaluate a compiler-directed code scheduling scheme, which considers both parallelism and data locality. It analyzes the code using a locality parallelism graph representation, and assigns the nodes of this graph to processors.We also introduce an Integer Linear Programming based formulation of the scheduling problem. We propose a compiler-based SPM conscious loop scheduling strategy for array/loop based embedded applications. The method is to distribute loop iterations across parallel processors in an SPM-conscious manner. The compiler identifies potential SPM hits and misses, and distributes loop iterations such that the processors have close execution times. We present an SPM management technique using Markov chain based data access. We propose a compiler directed integrated code and data placement scheme for 2-D mesh based CMP architectures. Using a Code-Data Affinity Graph (CDAG) to represent the relationship between loop iterations and array data, it assigns the sets of loop iterations to processing cores and sets of data blocks to on-chip memories. We present a memory bank aware dynamic loop scheduling scheme for array intensive applications.The goal is to minimize the number of memory banks needed for executing the group of loop iterations

The hArtes Tool Chain

This chapter describes the different design steps needed to go from legacy code to a transformed application that can be efficiently mapped on the hArtes platform

Run-time optimization of adaptive irregular applications

Compared to traditional compile-time optimization, run-time optimization could offer significant performance improvements when parallelizing and optimizing adaptive irregular applications, because it performs program analysis and adaptive optimizations during program execution. Run-time techniques can succeed where static techniques fail because they exploit the characteristics of input data, programs' dynamic behaviors, and the underneath execution environment. When optimizing adaptive irregular applications for parallel execution, a common observation is that the effectiveness of the optimizing transformations depends on programs' input data and their dynamic phases. This dissertation presents a set of run-time optimization techniques that match the characteristics of programs' dynamic memory access patterns and the appropriate optimization (parallelization) transformations. First, we present a general adaptive algorithm selection framework to automatically and adaptively select at run-time the best performing, functionally equivalent algorithm for each of its execution instances. The selection process is based on off-line automatically generated prediction models and characteristics (collected and analyzed dynamically) of the algorithm's input data, In this dissertation, we specialize this framework for automatic selection of reduction algorithms. In this research, we have identified a small set of machine independent high-level characterization parameters and then we deployed an off-line, systematic experiment process to generate prediction models. These models, in turn, match the parameters to the best optimization transformations for a given machine. The technique has been evaluated thoroughly in terms of applications, platforms, and programs' dynamic behaviors. Specifically, for the reduction algorithm selection, the selected performance is within 2% of optimal performance and on average is 60% better than "Replicated Buffer," the default parallel reduction algorithm specified by OpenMP standard. To reduce the overhead of speculative run-time parallelization, we have developed an adaptive run-time parallelization technique that dynamically chooses effcient shadow structures to record a program's dynamic memory access patterns for parallelization. This technique complements the original speculative run-time parallelization technique, the LRPD test, in parallelizing loops with sparse memory accesses. The techniques presented in this dissertation have been implemented in an optimizing research compiler and can be viewed as effective building blocks for comprehensive run-time optimization systems, e.g., feedback-directed optimization systems and dynamic compilation systems

Automatically Leveraging MapReduce Frameworks for Data-Intensive Applications

MapReduce is a popular programming paradigm for developing large-scale, data-intensive computation. Many frameworks that implement this paradigm have recently been developed. To leverage these frameworks, however, developers must become familiar with their APIs and rewrite existing code. Casper is a new tool that automatically translates sequential Java programs into the MapReduce paradigm. Casper identifies potential code fragments to rewrite and translates them in two steps: (1) Casper uses program synthesis to search for a program summary (i.e., a functional specification) of each code fragment. The summary is expressed using a high-level intermediate language resembling the MapReduce paradigm and verified to be semantically equivalent to the original using a theorem prover. (2) Casper generates executable code from the summary, using either the Hadoop, Spark, or Flink API. We evaluated Casper by automatically converting real-world, sequential Java benchmarks to MapReduce. The resulting benchmarks perform up to 48.2x faster compared to the original.Comment: 12 pages, additional 4 pages of references and appendi

Compiler-managed memory system for software-exposed architectures

Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2000.Includes bibliographical references (p. 155-161).Microprocessors must exploit both instruction-level parallelism (ILP) and memory parallelism for high performance. Sophisticated techniques for ILP have boosted the ability of modern-day microprocessors to exploit ILP when available. Unfortunately, improvements in memory parallelism in microprocessors have lagged behind. This thesis explains why memory parallelism is hard to exploit in microprocessors and advocate bank-exposed architectures as an effective way to exploit more memory parallelism. Bank exposed architectures are a kind of software-exposed architecture: one in which the low level details of the hardware are visible to the software. In a bank-exposed architecture, the memory banks are visible to the software, enabling the compiler to exploit a high degree of memory parallelism in addition to ILP. Bank-exposed architectures can be employed by general-purpose processors, and by embedded chips, such as those used for digital-signal processing. This thesis presents Maps, an enabling compiler technology for bank-exposed architectures. Maps solves the problem of bank-disambiguation, i.e., how to distribute data in sequential programs among several banks to best exploit memory parallelism, while retaining the ability to disambiguate each data reference to a particular bank. Two methods for bank disambiguation are presented: equivalence-class unification and modulo unrolling. Taking a sequential program as input, a bank-disambiguation method produces two outputs: first, a distribution of each program object among the memory banks; and second, a bank number for every reference that can be proven to access a single, known bank for that data distribution. Finally, the thesis shows why non-disambiguated accesses are sometimes desirable. Dependences between disambiguated and non-disambiguated accesses are enforced through explicit synchronization and software serial ordering. The MIT Raw machine is an example of a software-exposed architecture. Raw exposes its ILP, memory and communication mechanisms. The Maps system has been implemented in the Raw compiler. Results on Raw using sequential codes demonstrate that using bank disambiguation in addition to ILP improves performance by a factor of 3 to 5 over using ILP alone.by Rajeev Barua.Ph.D