Neural network-based adaptive global sliding mode MPPT controller design for stand-alone photovoltaic systems

The increasing energy demand and the target to reduce environmental pollution make it essential to use efficient and environment-friendly renewable energy systems. One of these systems is the Photovoltaic (PV) system which generates energy subject to variation in environmental conditions such as temperature and solar radiations. In the presence of these variations, it is necessary to extract the maximum power via the maximum power point tracking (MPPT) controller. This paper presents a nonlinear generalized global sliding mode controller (GGSMC) to harvest maximum power from a PV array using a DC-DC buck-boost converter. A feed-forward neural network (FFNN) is used to provide a reference voltage. A GGSMC is designed to track the FFNN generated reference subject to varying temperature and sunlight. The proposed control strategy, along with a modified sliding mode control, eliminates the reaching phase so that the sliding mode exists throughout the time. The system response observes no chattering and harmonic distortions. Finally, the simulation results using MATLAB/Simulink environment demonstrate the effectiveness, accuracy, and rapid tracking of the proposed control strategy. The results are compared with standard results of the nonlinear backstepping controller under abrupt changes in environmental conditions for further validation

Convergence analysis and tuning of a sliding-mode ripple-correlation MPPT

The development of fast Maximum Power Point Tracking (MPPT) algorithms for photovoltaic (PV) systems with high bandwidth and predictable response to irradiation transients is attractive for mobile applications and installations under fast changing weather conditions. This paper proposes the convergence analysis of a sliding-mode version of the MPPT based on ripple correlation control (RCC). The contribution of the paper is a dynamic model, useful to derive a set of design guidelines to tune the sliding-mode RCC-MPPT and achieve a desired dynamic performance under irradiation transients, without a dedicated commissioning phase. The research is based on sliding control theory and it includes both the chattering phenomena analysis and a discussion on the effects of reactive parasitic elements in the PV module. The proposed analysis and design have been validated by Matlab simulations first and then with experimental tests on a 35 W panel with a boost converter charging a 24 V battery. The results support the effectiveness of the proposed modelling procedure and design guidelines, showing good agreement between the model prediction and the experimental transient response

The use of power DC-DC converters and gyrator structures for energy processing

This article provides a classification of high efficiency switching power-gyrator structures and their use as cells for energy processing in photovoltaic solar facilities. Having into account the properties of these topologies presented in the article, their inclusion in solar facilities allows increasing the performance of the whole installation. Thus, the design, simulation and implementation of a G-type power gyrator are carried out throughout the text. In addition, in order to obtain the maximum power from the photovoltaic solar panel, a maximum power point tracking (MPPT) is mandatory in the energy processing path. Therefore, the practical implementation carried out includes a control loop of the power gyrator in order to track the aforementioned maximum power point of the photovoltaic solar panel.Postprint (published version

The use of power gyrator structures as energy processing cells in photovoltaic solar facilities

This paper will provide a classification of high efficiency switching power-gyrator structures and their use as cells for energy processing in photovoltaic solar facilities. Having into account the properties of these topologies presented in the article, their inclusion in solar facilities allows increasing the performance of the whole installation. Thus, the design, simulation and implementation of a G-type power gyrator are carried out throughout the text. In addition, in order to obtain the maximum power from the photovoltaic solar panel, a maximum power point tracking (MPPT) is mandatory in the energy processing path. Therefore, the practical implementation carried out includes a control loop of the power gyrator in order to track the aforementioned maximum power point of the photovoltaic solar panel.Postprint (published version

Robust power control for PV and battery systems: integrating sliding mode MPPT with dual buck converters

This paper presents a comprehensive exploration of an integrated Buck-Boost converter and Sliding Mode Control (SMC) Maximum Power Point Tracking (MPPT) system for optimizing photovoltaic energy conversion. The study focuses on enhancing solar energy extraction efficiency, regulating output currents, and ensuring effective battery utilization. Through a systematic analysis of converter component sizing and operational modes, the paper delves into the intricacies of the Buck-Boost converter. The unique contribution lies in the innovative integration of SMC with the traditional Perturb and Observe (P&O) algorithm, providing robust and adaptive MPPT under varying environmental conditions. Additionally, the paper introduces a battery management system with three distinct modes, namely, Charging, Direct, and Discharging, offering intelligent control over critical scenarios. Simulation results underscore the robustness of the proposed system under diverse conditions, demonstrating its effectiveness in managing power distribution based on battery charge levels, even in scenarios of insufficient solar power. Overall, this research significantly contributes to advancing the understanding of PV/battery systems and offers a practical, sustainable solution for optimizing energy production, distribution, and storage, marking a substantial stride towards a more efficient and sustainable energy future

Integral sliding-mode controller for maximum power point tracking in the grid-connected photovoltaic systems

The output power generated in the photovoltaic modules depends both on the solar radiation and the temperature of the solar cells. To maximize the efficiency of the system, it is required to monitor the maximum power point of the photovoltaic system. For this purpose, monitoring the maximum power point (MPPT) of photovoltaic systems should be as quick and accurately as possible for increasing energy production, which ultimately increases the cost-efficiency of the photovoltaic system. This paper proposes a new approach for MPPT) using the concept of the integral sliding mode controller (ISMC) to ensure fast and precise monitoring of the peak power. The performance of the ISMC is significantly influenced by the choice of the sliding surface. To assess the reliability ISMC control, the results have been compared with those of a PI controller. The results obtained are used to evaluate the performance of the ISMC strategy under different climatic conditions. Finally, the effectiveness of the proposed solution is confirmed using simulations in PSIM tools and experimental results were used to evaluate the effectiveness of the proposed approach

Multi-Input Single-Inductor MPPT Regulator with Sliding-Mode Controller

abstract: A Multi-input single inductor dual-output Boost based architecture for Multi-junction PV energy harvesting source is presented. The system works in Discontinuous Conduction Mode to achieve the independent input regulation for multi-junction PV source. A dual-output path is implemented to regulate the output at 3V as well as store the extra energy at light load condition. The dual-loop based sliding-mode MPPT for multi-junction PV is proposed to speed up the system response time for prompt irradiation change as well as maximize MPPT efficiency. The whole system achieves peak efficiency of 83% and MPPT efficiency of 95%. The whole system is designed, simulated in Cadence and implemented in PCB platform.Dissertation/ThesisMasters Thesis Electrical Engineering 201

Sliding Mode Control of A DC Distributed Solar Microgrid

This paper proposes a standalone distributed photovoltaic system which includes two independently controlled solar power sources, a battery storage and a resistive load. Each of the PV panels consist of cascaded DC-DC boost converters controlled through two independent sliding mode controllers. The design and simulation of the supervisory controller are also discussed. First, maximum power point tracking (MPPT) control strategy is introduced to maximize the simultaneous energy harvesting from both renewable sources. Then, according to the power generation available at each renewable source and the state of charge in the battery, four contingencies will be considered in the supervisory controller. Moreover, power converters interfacing the source and common DC bus will be controlled as voltage sources under a Pi-sliding mode controller. Numerical simulations demonstrate accurate operation of the supervisory controller and functionality of the MPPT algorithm in each operating condition

Fuzzy maximum power point tracking compared to sliding mode technique for photovoltaic systems based on DC-DC boost converter

Aim. This paper presents the amelioration of maximum power point tracking using fuzzy logic methods for photovoltaic system supplying a standalone system. Method. The main role of the maximum power tracking is to force the system for working at the maximum point for each change of meteorological conditions. The classic technique Perturb and Observe is more attractive due to its simple and high efficiency. Sliding mode is a non-linear control technique; characterised by robustness against the parameters change or disturbances, it gives a good maximum power operation under different conditions such as changing solar radiation and photovoltaic cell temperature. Novelty. Fuzzy logic tracking technique is treated. Fuzzy rules construction is based on Perturb and Observe behaviour when the appropriate disturbance step is produced in order to obtain a fast system with an acceptable precision. We use in our study 60 W photovoltaic panel associated to boost chopper converter in order to supply a standalone system. Results. As show in results figures using fuzzy maximum power point tracking the ameliorate performances especially the very low oscillation rate (nearly 0.6 W), and very acceptable response time 0.1 s.Мета. У цій роботі представлено покращення відстеження точки максимальної потужності з використанням методів нечіткої логіки для фотоелектричної системи, що постачає електроенергію до автономної системи. Метод. Основна роль відстеження максимальної потужності – примусити систему працювати в максимальній точці при кожній зміні метеорологічних умов. Класична техніка збурення та спостереження є більш привабливою завдяки своїй простоті та високій ефективності. Режим ковзання – це нелінійний метод керування; характеризується стійкістю до зміни параметрів або порушень, дає хорошу максимальну потужність роботи в різних умовах, таких як зміна сонячного випромінювання та температури фотоелектричних елементів. Новизна. Використовується методика відстеження з використанням нечіткої логіки. Побудова нечітких правил базується на поведінці збурення та спостереження, коли виробляється відповідний крок збурення, щоб отримати швидку систему з прийнятною точністю. У цьому дослідженні використовується фотоелектрична панель потужністю 60 Вт, підключена до перетворювача, що підвищує, для постачання електроенергії до автономної системи. Результати. Як показують результати, дані використовують нечітку максимальну точку потужності, яка відстежує покращені характеристики, особливо дуже низьку швидкість коливань (майже 0,6 Вт) і дуже прийнятний час відгуку 0,1 с